I have worked in professional racing for 20 years and the purpose of those Motorsport wiring harness are made so you can pull the engine out quickly. That’s why every line is a quick connection aluminum on braided line. For speed not to look cool.

@hpa101

Жыл бұрын

Yes the connectors are rated for many cycles of use in this regard too compared to other options - Taz.

@stellaroid

3 ай бұрын

you can have a milspec bulkhead connector on any harness but it wouldn't necessarily make the whole harness "motorsport" grade

Thanks for offering these videos. A lot of people are visual learners, and education needs to go in this direction to some degree. I finally did a harness that's concentrically twisted and put intermediate connectors on it to have replaceable branches. It ended up suiting the application nicely.

As someone who makes harnesses for all types of motorsport, club level or a so called “milspec” with raychem boots and AS connectors. When I do the loom for my project car I will ofcourse be going all in for it because I love doing it, but a club level loom is suitable for any road car or track day car. Anything that’s racing at the highest level such as GT or World Series championships must have a proper milspec loom. It’s a must. Completely agree with andre on this one.

@ChevyS10LSUK

7 ай бұрын

Are you UK based? If so I need a harness made

@AshLongie

2 ай бұрын

​@@ChevyS10LSUKI've also had issues in UK with very poor harnesses and ended up making my own this so called professional that crimped connectors were all pulling out lol just take your time don't worry about wasting material on your first time also get the correct crimp tools

@ChevyS10LSUK

2 ай бұрын

@@AshLongie thanks man, I’m struggling with the very basics at the moment. Do you use 1 ground for the loom (ground to chassis) or do you need to run the multiple grounds individually back through the loom? That’s the 1 thing preventing me from making my own loom.

@AshLongie

2 ай бұрын

@@ChevyS10LSUK in myn I've made 2 one for an Evo and one for fd3s Both very similar, the grounds they call it star point grounding think haltech or adapteonic made a vid onit where I select a point to ground but be careful the crank sensors cam sensors coil primary, require the 5v sensor ground from ecu so for this I used a ECU sensor ground thick wire to engine bay and branched off it same with the 5v + that comes out ECU, Always leave few extra wires spare in engine bay harness incase I want to add flex fuel or any additional sensors later on From battery a nice thick gauge wire straight to engine and one to chassis Be careful again if u relocate battery in boot I've noticed a very large voltage drop with DIY jobs, make sure you use a multimeter at fuel pump and check you getting decent voltage as I've seen pumps only have 11v even tho battery charging at 14.4v it's a lot to put all into message lol these are the things that pop into my head this was causing random tuning problems inconsistent tuning Also support your harness from any rubbing use Pclips

@AshLongie

2 ай бұрын

@@ChevyS10LSUK the reason I use 2 wires is I've had it where starters can cause interference with engine sensors Also have a more than adequate battery I've seen people use them tiny battery's cranks the engine but doesn't have enough capacity to keep all sensors powered while cranking

With the harness tape for lower spec harness it's worth chasing down the slightly more heavy duty stuff that's designed to be in the engine bay, the fluffy stuff is generally intended for interior usage. That said both seem to be holding up well in the two series Landrover's I've worked on.

Having a motorsports harness made for my GTiR was one of the best investments I made on it. It's only a street car. But boy is it nice. Not cheap. But nice.

@Diamondsintherubble

Жыл бұрын

I’d like to do the same for my new edge v6, mostly for simplicity and prep work between different engines and major components. However I’m worried about specific connectors for things like headlights/tail lights and might look into doing what they do at Le Mans, however some things will be pricey 😅

Just something I've noticed using both split plastic sheath & braid sand and dirt will build up inside and if there is any vibration or movement you will sandpaper the insulation off the wire eventually maybe not on a track car but on street car or anything running for extended periods of time. Seal your wiring.

Not motorsport, but I do a lot of harness design for work which led to this video showing up in my recommended (thanks youtube). You bring up a good point that "mil-spec" as a term is fairly vague in what type of connector it refers to as there is such a wide variety. To simplify this, often the term "mil-circular" is used to describe the type of connector shown as it is by far the most common type used. Not saying the motorsport industry must/should adopt the term, but it is an instantly recognizable term to other industries supplying/using these connectors. Also, if you really want to enter a world of confusion, start looking into mil-spec wire. It might hurt your brain in more ways than one (spools of PTFE jacketed solid-core cable can act similar to a wound garage-door spring).

What about Deutsch DRB connectors as a bulkhead connector? They have high pin densities and high pin counts (128 max). They also have varying pin sizes. The 102 pin version has (2) 4 ga, (4) 8 ga, (16) 12 ga, (80) 16 ga. They are a little large 5" x 2.5". I think there are also options for boots and elbows.

I like to use the loom tape. Then split loom. With cloth tape loom on top. For the period correct look.

Thanks god for finding your chanal guys

I’d just make one for it to look awesome and more clean than stock lol

Kapton, as a product name, covers a range of materials. Some particular types of Kapton is susceptible to cracking and arcing and was subject to certain actions, depending on where it was installed in aircraft (ie inside fuel tanks). It is wrong to say all Kapton is bad and all was removed…

is it possible to build a club level harness with a bulkhead connector because that seems efficient for cars with difficult to work around engines

@justion337

Жыл бұрын

Look at Deutsch HDP20 bulkhead connectors. Plastic, but far cheaper and available in up to 47 pins. You can also save by using open barrel crimp pins instead of the solid pins that need the $200 crimp tool.

@njdorset1050

Жыл бұрын

@@justion337 thanks for the information I've been trying to find information on a bulkhead connector but haven't had much luck

@hannahranga

Жыл бұрын

I'll second the recommendation for the hpd connectors, they're a very cost effective option especially as there's the commonality of pins and tooling with the various sized Deutsch DT/DTM/DTP connectors. Personally I'd avoid the open barrel pins cos I find them quite finicky. Unfortunately the price of the HDT-48-00 factory crimper has gone silly else I'd recommend that (I paid 1/2 of the current price)

@Jursaw

Жыл бұрын

@@hannahranga buy the JR version, i did on amazon $200 shipped

Kapton is quite flammable. Kapton insulated wiring was used by Airbus a while ago until an accident happened some time ago. Aircrafts with Kapton wiring a still in service till this day.

@hpa101

Жыл бұрын

I should really have my coffee before diving in here haha. This post is more helpful than my previous reply: m.facebook.com/HPAcademy/posts/4920009788091102?locale2=ne_NP - Taz.

@kimballscarr

11 ай бұрын

Well if things get that hot in the wiring… you’d better be bailing out. One reason aircraft wiring is laced together is to allow dissipation of heat. Burying the wiring only runs up the insulation temperature and resistance… the reason for rubber waterproof covering over wires and the like is the wiring is exposed in most military rotor-wing aircraft and in naval aviation to protect against chloride intrusion into the wiring in a damp or humid environment. In passenger aircraft the single most hazard to life is smoke inhalation of wiring insulation fumes due to fire. The question is whether to insulate wiring or route it away from heat sources the later rerouting is preferred practice. Back in the 1980s very high power density electric motors and generators in aircraft began to be popular over hydraulic actuators these were cooled with fuel internal circulation as originated in the Lockheed ADP Y12-SR71 to solve overheating in high temperature environments… which also depended on aluminum power replacing carbon black in the tires and the latent heat of the fuel used to cool the electronic components cameras and pilots. Now anti-freeze is used to cool motor generator windings in electric cars… though this can work it is extremely dangerous if the coolant leaks while hot… causing intense fires. Unstoppable are battery fires or heat failures.

@kimballscarr

11 ай бұрын

The F35 and F22 wiring is far far beyond that of other known aircraft…. One of the reasons for the high cost of the F35 was the wiring this also caused significant program delays. Using conventional wiring there was not enough room to install so other very exotic wiring was developed to shrink wiring bundle and actual wire volumes an order of magnitude. This means wiring evolved to carry power much differently than circular mil rated wiring…. F1 wiring is antiquated in comparison like 1912 touring coach compared to present day F1 car.

@Dr_Xyzt

7 ай бұрын

The historical issues of Kapton were when it was used as insulation that got exposed to moisture. Here, it's just tape that's wound around polyethylene insulated wire and buried in heat shrink. Kapton tape is awesome.

So how much weight would you actually save with the same harness made at a pro level vs. a club level?

@jeff666p

Жыл бұрын

I would imagine the pro harness would weigh the same or more with the metal plugs vs plastic.

Thanks to your detail video about harnesses I am also wiring and harnesses technician please help me I want a any company about it

@muhammadnadeemranjha3321

5 ай бұрын

I am working on aircraft wiring and harnesses last 25 years experience

Factory wire harnesses leave a lot to be desired. A couple bulkhead connectors and converting to heat shrink makes a big difference. -- The harness doesn't need to be concentrically twisted. If you mock it up and heat shrink it on the vehicle, the harness will hold the shape of wherever it belongs. So, if you plan for that, you should be able to get a good fitting system in a reasonable amount of time. -- If you plan things carefully, a harness will be repairable, simple, clean, and fast.

@hpa101

9 ай бұрын

You can use anything you like, it all has pros and cons. The important part is understanding both pros and cons and deciding what you can live with and without for your budget and use case/application 😎 - Taz.

@Dr_Xyzt

9 ай бұрын

@@hpa101 Definitely! Wiring is something I should have learned to do a long time ago. Thanks for posting these videos! It helps people be more realistic in their projects.

@hpa101

9 ай бұрын

It's always better to have started when you did than even later. Hard to fit it all into life too! Great to hear it sounds like you have a handle on things and are enjoying it 😎 - Taz.

@Dr_Xyzt

9 ай бұрын

@@hpa101 Yeah. Currently, I do stuff for tractors and semis. The owners are tired of OEM hassles. They want the harness to come apart "right here, over there, and be covered with that smooth stuff so they can pressure wash it." Some day, I'll do that awesome hybrid monococue/tube frame race car that's worthy of a concentrically wound harness that's modular for crashes.

Can you go over how you label your wires? I've always had troubles with using a label maker as it leaves a long tail sticking out of the harness. Do you also have a method of labelling each conductor? When I remove my connector it's difficult to identify which pin they were in originally as I use only use red wire

@blindaceg

Жыл бұрын

Not sure what you mean by the long tail. My main issue with labels was dealing with weak adhesive. Even if you have nice labels with good adhesive, I'd still recommend clear shrinkwrap to secure and protect the label. Possible solution to the tail too? Probably not but I felt like sharing.

@1hdsquad

Жыл бұрын

There are label makers that can print directly onto shrink wrap!

@kylegoldston

Жыл бұрын

@@1hdsquad yep and there's video on KZread.

@thomaswerner5821

Жыл бұрын

Best solution would be a laser wire marker but a Dymo shrink tube printer will do just fine.

@tslater1989

Жыл бұрын

Typically as I build a harness, I make a diagram with color codes etc. You can find primary wire with all sort of color combo's. If that's not something your interested in, the printers for shrinktube work well. Mine is less racing, more restoration, or custom builds. So printing on the tubing isn't a great long term solution for something that's exposed to the elements. Build your harnesses modular too. Divide it into zones or systems.

Hi i need help re-harnassing a volvo 245dl station wagon i dont know where to start . And where can i get a harness from? I like your show .

@hpa101

Жыл бұрын

Hey Darryl, if you need a custom harness you will have to make it yourself or get a local professional to do it for you if that's what you mean. If you're just asking where you buy the materials, check out this thread, heaps are listed there to help you get started: www.hpacademy.com/forum/efi-wiring-fundamentals/show/wiring-and-accessories-suppliers-list - Taz.

literally here for an electric vehicle conversion it's interesting that in an ev, heat is a complete non issue, fuel too, so i can get away with the much cheaper options that are mostly for abrasion resistance however water resistance and proofing become a little more important because electrical shorts with complex ev electronics cause bigger problem than an ECU might need to deal with

@hpa101

Жыл бұрын

Heat is an issue on the performance EV side of things for sure. Hope the conversion is going well 😎 - Taz.

@Ryukachoo

Жыл бұрын

@@hpa101 not nearly, engines get incredibly hot, motors get only kind of toasty by comparison and a radiator fan easily suck all that heat away fast. If you're talking about DC motor drag racers, those can get kinda hot

@hpa101

Жыл бұрын

www.hpacademy.com/blog/700whp-hybrid-350z-and-electric-lotus-modern-ev-conversions-tech-talk/

@Ryukachoo

Жыл бұрын

@@hpa101 ah, I think I get the confusion. Heat in an EV context is like heat in a human context. For an engine, 100c is normal, for a battery system, only 21c is normal and it feels nice for people. In fact upwards of 50 or 60c is when humans get heat stroke in minutes, or when emergency power shutdowns start disconnecting batteries. 70c is a *battery fire*. Even power electronics inside the motor and inverter rarely get above 60c in normal operation otherwise they start losing their brains. So for EVs the total heat isn't much but you REALLY REALLY do not want to overheat stuff, operating within a pretty narrow temp range, and quickly/viciously rejecting all heat beyond that. In that context, even regular PVC wire is fine, you're basically never going to get it hot enough to cause issues unless the car's on fire and in that case, you got bigger problems.

Not going to lie most wiring runs can be made very clean and 90% water proof with a good electrical tape job and cheap braided sheath near hot spots and on the visible runs. Will work perfectly rub and heat resistant can use heat gun on tighter corners and it will hold shape pretty good can do a whole car for $50. Can use heat shrink and get the cheap plastic connectors 99% waterproof. Can also reuse factory connectors or go cut them from the wreckers to reuse. Can have the fanciest connectors and still have a bad crimp or connection giving you grief . Can also make a fancy custom loom and realise you want to change a wire run highly recommend having a car running and driving before you wrap or sheath it as well.

@Marko-JZX100

Жыл бұрын

What else you can do?

Sorry to question something, but why would a professional team replace a high end motorsport grade harness after every round? Isn't that the point of it being a high end motorsport harness for it to last well? It almost seems as exposing the team to higher risk of failure by replacing a harness so often. Introducing more potential for manufacturing defects. If the harness is that well build then it shouldn't be a potential failure point for many years.

Where do you get oem connectors beside the dealership?

@hpa101

Жыл бұрын

Some aftermarket suppliers stock them too. There isn't a specific source as some places specialise in one marque and often even just one specific model. Once you have the part number it's straight forward to search - Taz.

Is it possible to use GXL, or could the extra thickness be a problem?

@hpa101

Жыл бұрын

The wall thickness is only an issue if you're using it with connectors that are not suited to that thickness, so the answer is both yes and no. We generally use TXL though, or Tefzel, depending on what we're building rather than GXL. Note that often the wire is one of the cheaper aspects of the materials bill - Taz.

@Dr_Xyzt

7 ай бұрын

There's a tradeoff somewhere. 14 SXL is so thick, putting heat shrink on it is optional. 16 SXL is workable, but kinda stiff. Hard to make strain relief loops. 18/16 GXL has a "quality" feel. Strain relief loops are workable in this size. 12 TXL in a 14 circuit bundle is about like a 00ga welding lead. Can't tie it in a knot, but it's workable. Good luck!

Wtf was that sound at 34:06 lmao Andre’s logging off sound

@hpa101

Жыл бұрын

My new ring tone 😄- Taz.

@Vehicular.Shenanigans

Жыл бұрын

@@hpa101 hahaha nice

What's the spelling on that "kendall" Tape?

@hpa101

Жыл бұрын

Kapton, note it's also in the captions 🤓 - Taz.

Yeah but I'm also worried about EMF coming off the wires

@hpa101

Жыл бұрын

What is the information source that has you worried about this? If you are doing things correctly, like shielding and twisting (pairs, you don't need to do the whole loom) where applicable, EMF is not a concern - Taz. Members lesson '298 | Terminating Shielded Cable' - www.hpacademy.com/previous-webinars/298-terminating-shielded-cable/?

@hpa101

Жыл бұрын

Also a good one: www.hpacademy.com/previous-webinars/230-star-point-earthing-explained/? And this one is probably also a good one for you, but it doesn't cover interference, just generally a good watch: www.hpacademy.com/previous-webinars/306-basic-wiring-fault-finding-2/? - Taz.

When you name a component or item that is less common can you provide spelling of it on the screen? With your Australian accent it's hard to get what said so I can research that specific item.

@hpa101

Жыл бұрын

That's what the captions are there for and it's exactly what they do. I recommend you turn them on 😎 - Taz.

@moabman6803

Жыл бұрын

@@hpa101 Haha good point. Thank you.

@hpa101

Жыл бұрын

No worries. Note we work to try ensure every video has solid, accurate captions too. They are not the shitty auto-generated ones that have you guessing as much as you do without them haha - Taz.

I have been around motorsports alot in my life. Presently I drive a log truck in the northwest of the US 🇺🇸. I can honestly say, O.E.M. wiring harnesses are shit. Especially with the chemicals applied to the road in winter..building a correct harness, using the racing industry application. Would probably save you thousands over time!

@hpa101

11 ай бұрын

Everyone thinks just because OEMs make and spend a lot of money that they are doing the best job possible. As you know, far from the truth! They are there to make money, not a perfect product 🤘 Safe driving mate! Always impressive where you fellas pedal those log trucks up the side of mountains! - Taz.

So no tined or silvered wire not teflon insulated wires heck no shielded wires and is a "pro" wiring harnes ?? overpriced aviation lookalike connectors sheez man

@hpa101

Жыл бұрын

Have another watch, think you've missed a fair bit 😎 - Taz.