YOKOMO RC Drift FULL OPTION YD-2ZX Build! | A Perfect End
Автокөліктер мен көлік құралдары
This video is about YOKOMO RC Drift FULL OPTION YD-2ZX Build! A Perfect End.
YD-2 is a typical YOKOMO RWD RC drift car, which is early launched in 2016. Time passed, YOKOMO has developed different versions of YD-2 to reflect the maximum potential of this chassis. In every version of YD-2, it has brought me a lot of power, confidence and joy to exert in every RC drift world competitions. So, YD-2 left a very deep impression on me.
Until YD-2ZX is launched, its unique philosophy, lightweight and flexible design rewrite the concept of weight transfer in RC drift.
I want to make use of this video to explore the highest limits of a fully optioned YD-2ZX, outline the ultimate luxury look of YD-2ZX and draws YD-2 to a perfect end.
*Please subscribe to be notified to get my latest video!
Want to explore more about my RC Drift content? Follow me on SOCIAL MEDIA!
Instagram: / timmywoo318
Facebook: / timmywoo318
Twitter: / timmy_woo_drift
*The following part number maybe revised by manufacture
YOKOMO YD-2ZX (Purple) option parts list:
D-CFP Aluminum frame 30mm cooling fan (purple)
DPP-302V4PA Racing Performer V4 Steering gyro (2/3ch Purple)
Y2-017AGP Hybrid front shock tower (Graphite/Purple aluminum) for YD-2
Y2-P001B Aluminum front bumper brace (purple/Bevel edge) for YD-2
Y2-REM-P Rear ESC mount for YD-2 series (Purple)
Y2-301AP Aluminum adjustable suspension mount set for YD-2 (Purple/Bevel edge)
Y2-P08FSC Aluminum front lower short A arm set (Purple/Bevel edge) for YD-2
Y2-P08FUI Aluminum Front Upper Arm (Purple) for YD-2
Y2-OP2 Aluminium steering block set
Y4-S5T Titanium coated shock shaft for SLF Big bore shock
D-155-23A Aluminum 23mm Rod end adaptor for Front upper A arm
Z2-503GHC Aluminum gear diff case cap (Hard coat) for YZ-2/YD-2 series
Y2-303IG Graphite Idler Shaft for YD-2
Y2-118CG Graphite battery holder for YD-2
Y2-001GB Graphite bumper/bumper brace for YD-2 series
Y2-503IA Aluminum Idler Gear for YD-2
Y2-P08RASA Aluminum adjustable rear short H arm for YD-2 (Purple/Bevel edge)
Titanium turnbuckles full set
High precision cutting titanium screw full set
This Drift channel is to share my ultimate drift experiences, tips, knowledge and competition mastery for RC, as well as sharing my drift experiences for real car. I hope my sharing can solve your problems faced with your Rc car and also in competition.
If you enjoyed my video, don't forget to subscribe my channel and hit the like button, your support would be appreciated!
QUESTIONS?
If you have any questions, please don't hesitate to comment my video below!
#rccar #rcdrift #yokomo
Пікірлер: 53
Such a beautiful chassis, it doesn't even need the body to be a show piece. Amazing build!!
I thought your first build video was impressive. This is next level. Respect.
Man this is my favourite video in the entire world!!!!!!!!!
Just love your videos. Content is 🔥. Transitions, b role, music all 🔥 . Moive time with Timmy...
@TimmyWoo
Жыл бұрын
Thank you for your long-term support! I will keep up the good work!❤️
Amazing video. I'm just getting into drifting.. iv been flying and making fpv videos for a few years but im finding drifting a little less stressful and its nice not having to worry about the weather all the time.. so glad I found your channel.. AMAZING
@TimmyWoo
Жыл бұрын
Thank you ❤️ Welcome to the RC drift hobby!
I do really love the quality in your video love watching your builds
@TimmyWoo
Жыл бұрын
Thank you very much!
Great video, nice color of the gloves :-)
Now i want to build one too 😅 Perfect video 🎉
@TimmyWoo
Жыл бұрын
Thank you!❤️
Ok now we just need a give away of 50 of these cars to ensure maybe we all get one? LOL Gorgeous car.
Very nice video, btw i am not sure about my suspension setup, i have veeery soft coils in the front and a little harder in the back and dont know what the better is, should i run it super soft, medium or hard
Timmy, you installed your Teams pistons inverted when the cap and diaphragm are in the standard up position. If you rotate the shock upside down then you would invert the piston cap. Cheers from Mt. Fuji Japan
@TimmyWoo
Жыл бұрын
Good spot👍🏻It actually depends on driver’s preference. Pistons inverted or not depending on what track surface and layout and choosing the right suspension setup for specific track. Teams pistons provide good options for driver to adjust compression and rebound speed😊
🔥🔥🔥🔥great video!!!!
@TimmyWoo
Жыл бұрын
Thank you! ❤️
You could go another step and do a Reve-D mc1 conversion and rhino racing diff. Even so great build 👏
Do you have a video on how to paint the body it looks amazing
Very nice vid...👌
@TimmyWoo
Жыл бұрын
Thank you ❤️
YD-2ZX vs YD-2RX? what is better
Can you share a link to those parts you have used on this build Its pretty awesome build
Can you explain me what you have done, in previous video you build yd2zx kit and here you rebuild this with what kind of parts and from what brand
Hi Tim, great video bro! May i know, how long it take to fully assemble the whole car? How much (HK or US Dollar) does it cost for this unit? Tq
I love ur video!! btw What drift machine is best do u think?
@TimmyWoo
Жыл бұрын
Thank you! At this moment, YD-2ZX is my favourite chassis. I am currently building MD1.0 and will explore further soon!
sweet video timmy, may I ask what bar you have your front lower arms on and camber? cheers I just built a exiis full optioned but trying to get it dialed in.
@TimmyWoo
Жыл бұрын
Thank you very much! The bar which I am using is aluminium 30mm rod end adapter with around 10 deg camber.
Please make a video on shell livery paint love from india🇮🇳
Bonjour vous avez une référence pour le palonnier du servo ? Merci 😉
Hi.. may i know what was the size of pinion & spur u use? Also on the pulley?
Quelle huile et ressort d’amortisseur utilisez vous ?
Which is better yokomo yd2zx or overdose glam or mst rmx
where did you find these wheels?
What website do you order the items
Do you still have this chassis? Is it your favorite or do you own others you prefer drifting over this one?
What name or type ur body mounting bro... Front and rear...
Is the build u showed evreything that is on it?
Hi, im new to this drifting rc car, on a survey to buy yokomo brand, need your help to elaborate which one is better either yd-2zx, yd-2rx and md-1.0 chassis? And can you elaborate what is the difference between this chassis? Thank you and appreciate your thought.
@TimmyWoo
Жыл бұрын
MD1.0 is lightweight design than YD-2ZX & RX, weight distribution is more at the rear, fast acceleration and transition is more freely. RX motor position is designed at the back, good for high speed track. While ZX good for medium to low speed track.
song?
bro, you forgot ceramic ball bearing in the differential
please hw much it cost to build this car? like the whole damn price :))
Hope you can share your set-up. Thank you
@TimmyWoo
Жыл бұрын
This build is based on original setup from YOKOMO 😊
@markrodriguez5984
Жыл бұрын
How do you compare it to the limited edition set up? Thank you
@TimmyWoo
Жыл бұрын
If you are saying 100 ZX limited editions, it has special new lightweight slide rack rail design. In theory, steering response is faster. With ‘Teams’ parts, it is ultimate RC drift collection!
Not full option, still missing titanium pillowbals and lightweight steering rack (slider).
Yea… but it’s not fully optioned… you are missing the brass differential case.
very expensive
最終的にはESCとプロポのセッティングなんだよね。組み上げやアライメントはある程度説明書通りに組めば大差無い‼️その後なんだけど誰もそこを明かさないし公表しない闇だね‼️極端に言えばだいたい組み上がってたら後はESCとプロポセッティングでどうにでもなる。