Yamaha YFZ350 Banshee with DMC Pipes VS SuperCub 520 Banshee Build
Автокөліктер мен көлік құралдары
Back to Back Dyno Comparison of a stock Yamaha YFZ350 Banshee with DMC Pipes VS SuperCub 520 Banshee Build.
Tested at Dyno Dynamics.
Builds by MAK Custom
IG: @makcustomparts // @mak_custom
www.makcustomparts.com
Пікірлер: 31
Man love the channel already and I’m 5 seconds into the first video!! New sub here 🎉
Man like mak.. the only person to go to for banshees 💪
Good work mak man I hope to see more videos like this not to many people are out here doing videos like this for the banshee community
Those joker graphics got to GO
Lovely work mak
Why haven’t you done any more uploading bro?
Sweet video but ditch those rear tires on a dyno
Sickk!!
👑🔥🔥🔥
That bike should make a ton more hp, my stock cylinder 4 mill pump gas banshee makes that much hp, my 4mill stock cylinder on alcohol made 100+hp, that’s a lot of money to spend to not make very much hp when you could have just slapped a cheaper 4mill crank in and have your stock cylinders ported. My buddies 521 on alcohol makes 140-150hp
@chadwems
6 ай бұрын
Correct. My Tony Miller 521 super cub on alky made 149 hp. with out of frame shearers. Their super is misfiring and breaking up. The stock banshee sounded healthy.
My Redline Racing 421 Cub made 94/48 on 93 mix with VP Octanium those cylinders must have stock ports or something
Really low numbers, my 421 cub made 91/48 as cast on race gas on a hot summer day. My previous build, a 4mm stock cylinder on stock carbs made more power.
Those numbers are way off, we build a lot of 421’s it should be in the 90’s then we play with timing and jetting for a couple of points. If it’s a serval 421 it will be a few points lower than a cub but not that far off I don’t think I would run the lectrons we have the jetting perfect with the pwk’s maybe those pipes aren’t working a 421 with Shearers and 35pwk’s will be in the 90’s for sure.
@angelmendoza1876
9 ай бұрын
how much would it take roughly to make a 100hp sleeper banshee.
sound like the stock one needs a tune an jets changed
521cc, not 520 ;-) nice video
💪💪💪💪💪💪💪💪💪
Beautiful banshee, absolutely gorgeous,but i was thinking that motor would put down over 90 rwhp.. is it ported/polished? What cylinders? I do think that dyno is strict but my 421 puts down more..
@Bansheeman174
11 ай бұрын
my 521 makes 120whp it has a drag port and it runs on 110 octane
@JDRTRM
7 ай бұрын
Right. I have a built 94 dark purple 403 4mil etc etc etc etc etc owned it for over 25yrs lots of $$$$ invested trail quad making 63hp dyno and would think this build should be no less then 20 more all day no less . Something can’t be right
@powersportsenthusiast1986
5 ай бұрын
hes running knobby tires on the dyno.. should be running smooth tires
@Bansheeman174
4 ай бұрын
@@powersportsenthusiast1986 slicks add 2hp he probably doesent have ported cylinders or the dyno is wrong
Nice Banshee Build. Check the more fastest Banshees in Puerto Rico on my Channel.
@michaelpizarro99
Ай бұрын
Que lo traiga para pr para que vea cómo se lo ponemos a gozar de verdad 🔥🔥🔥
Should be way over 100hp
You cannot Dyno with knobbiest and expect any hp.
graphics need to go, ruins the build
My 7mil makes more lol
Your 20 hp off
SUPER LOW POWER FOR A 520 BUILD.