Thanks. Great video. I’m going to go do this now!

@MotorcycleFettlers

11 ай бұрын

Take a look at our Take II video. It’s so much easier if you don’t need to take the carbs off. Let us know how you get on!

fantastic video. thanks for taking the time to make it :D

@MotorcycleFettlers

Жыл бұрын

Thanks for feedback. Glad you found it useful.

Very helpful thanks!

@MotorcycleFettlers

Жыл бұрын

No problem. Glad you found it helpful.

My Virago new 26 year old virago was running awful. The diaphrams in both had disconnected from the cylinder that houses the needle!! New ones in now and she runs a dream🎉

@MotorcycleFettlers

Жыл бұрын

Following our insitu carbutetor clean, we had a ride out to see how she was performing. It was a bit of a mixed bag. We'll be posting that video shortly. We've now ordered some carbutetor repair kits for a full off-bike clean and repair. We had no issues with the diaphragms but there were some small holes in the air cut off valves; which are also small diphragms. We shall also be posting this update video, shortly.

Наконец то показали как почисть , а то наши сразу пол мотоцикла разбирают!

@MotorcycleFettlers

3 ай бұрын

Спасибо за ваш отзыв.

What about the air mixture screw? Why didn't you take it out and clean it?

@MotorcycleFettlers

9 ай бұрын

Very good spot. We did do the air mixture screws but failed to show this on the video. I will pin a comment to say that it needs to be done. Thanks, for spotting this.

How do you get the other carb cover off?? The fuel line is in the way

@MotorcycleFettlers

3 ай бұрын

I'm not quite sure I understand the issue. Could you provide a little more detail? Feel free to send a photo to motorcyclefettlers@gmail.com if that may help.

5:59 what brand is the spray cleaner you use?

@MotorcycleFettlers

5 ай бұрын

We don't use any brand in particular. We just use whatever's available.

4:48 how can i order it to meddle east

@MotorcycleFettlers

10 ай бұрын

Sorry, Can't help you with that one.

Those cables that are connected above the carbs, what are they for? I bought a virago and it came with those cables disconnected I’m not sure what was connected before

@MotorcycleFettlers

7 күн бұрын

I think you're looking atthe carb heaters.

@Captain-gs4xv

6 күн бұрын

The time stamp at 3:52 shows it, it’s the white connectors above the carbs. Is that the heater ? Are they important ?

@MotorcycleFettlers

6 күн бұрын

If it's electrical and it's attached to the carb, then it's the heater. I don't recall if the heaters on ours, worked. From my experience and, anecdotally, then don’t make a huge difference. I had a broken one on a Kawasaki Zephyr and could not find a replacement on eBay. I guess, if you’re have trouble starting it, then try and find some replacements. That said, it’s an old bike so is likely to not always start on the button, anyway…

Uh as it happens my virago wont start ! Charged battery. Replaced spark plug, but there is nothing 😢 ignition on, usual buzzing and thats that. No revs nothing 😢 any suggestion if cleaning carbs will help? Or where should l look ?

@MotorcycleFettlers

7 күн бұрын

I think there's lots of possibilities. I'd first try to establish if it is electrical or fuel. Have you tested to see if there plugs are sparking? You could try some easy start to see if it will fire on that, which may indicate a fuelling issue. On an old bike, there's a good chance that the carbs will need some level of cleaning.

@PaoReno

7 күн бұрын

@@MotorcycleFettlers good stuff my garage also mentioned carbs. So thats a good shout. Getting new battery anyway. Will test again tomorrow 🤞🏼 thanks for the reply. Your videos are super helpful 👍🏼

@MotorcycleFettlers

6 күн бұрын

You can mostly service the carbs in-situ. We had to take ours off as we needed to replace the small diaphragms. They are a nightmare to take off and put back on…hopefully you can sort your problem without having to remove them.

I have virago 535 often my first cylinder floods overnight when I take out the spark plug, you can see that it is very wet what's the problem

@MotorcycleFettlers

5 ай бұрын

I wonder if the float is sticking or incorrectly set? I'd take the float bowl off and take a look.