Yamaha XT350 55V Full Restoration Rebuild Part 1 Main Disassembly
Жүктеу.....
Пікірлер: 15
@benknight89082 жыл бұрын
I’m about to start much similar work on a 1999 XT350. I look forward to the rest of your series.
@MrYammi
2 жыл бұрын
Thank you for your interest. Part 3 and 4 are coming, but I still need some time
@extremelyunfocusedman Жыл бұрын
super helpful to see the disassembly! Thanks a lot!
@MrYammi
Жыл бұрын
Thank you
@juliodelcarlo Жыл бұрын
Good job!
@ADVRider782 жыл бұрын
Super, wann kommt Part 2?
@josebergese6834 Жыл бұрын
Hello, your video is very good! it is very helpful. I can't remove the front wheel axle. Any recommendation?
@josebergese6834
Жыл бұрын
im working on a 1998 XT350,
@MrYammi
Жыл бұрын
Thanks. I have no idea...have you tried using an impact wrench and rust remover?
@Kikecuevas777 ай бұрын
Hello friend! Im restoring my xt 350! And i cant desinstall the alternator! How you made this tool? 😅
@MrYammi
7 ай бұрын
Hi! I made several attempts to loosen the flywheel. I carefully warmed it up and then got it loose at some point using a flywheel puller and an impact wrench
@nicktroutner9722 Жыл бұрын
what tool did you use to take off the generator?
@MrYammi
Жыл бұрын
It is an M27x1 Pole wheel puller, left-hand thread
@LampGenie2 Жыл бұрын
How much did you pay for that? just bought an 86 xt350 for 300$ and its SUPER beat and rusted but after an entire day of carb troubleshooting got it somewhat running. These carbs are pretty stupid, did you have issues with the float level?
@MrYammi
Жыл бұрын
300$ is a good price, i payed more. The Level is 6mm +- 0,5 mm. But the carb must be aligned horizontally
Пікірлер: 15
I’m about to start much similar work on a 1999 XT350. I look forward to the rest of your series.
@MrYammi
2 жыл бұрын
Thank you for your interest. Part 3 and 4 are coming, but I still need some time
super helpful to see the disassembly! Thanks a lot!
@MrYammi
Жыл бұрын
Thank you
Good job!
Super, wann kommt Part 2?
Hello, your video is very good! it is very helpful. I can't remove the front wheel axle. Any recommendation?
@josebergese6834
Жыл бұрын
im working on a 1998 XT350,
@MrYammi
Жыл бұрын
Thanks. I have no idea...have you tried using an impact wrench and rust remover?
Hello friend! Im restoring my xt 350! And i cant desinstall the alternator! How you made this tool? 😅
@MrYammi
7 ай бұрын
Hi! I made several attempts to loosen the flywheel. I carefully warmed it up and then got it loose at some point using a flywheel puller and an impact wrench
what tool did you use to take off the generator?
@MrYammi
Жыл бұрын
It is an M27x1 Pole wheel puller, left-hand thread
How much did you pay for that? just bought an 86 xt350 for 300$ and its SUPER beat and rusted but after an entire day of carb troubleshooting got it somewhat running. These carbs are pretty stupid, did you have issues with the float level?
@MrYammi
Жыл бұрын
300$ is a good price, i payed more. The Level is 6mm +- 0,5 mm. But the carb must be aligned horizontally