Thank you for taking the time to make this video, I learned a lot from it and was able to rebuild my own top end on an 1998 xt 350 which is running awesome now.
@hondaxl250k012 жыл бұрын
i got it now:)!!! was a new junk head gasket!! it was letting oil pour into the combustion chamber... at least now i know how to build a mosquito fogger!! lol it runs great now.... cant wait to hit the forest on thursday...
@ramsrider1410 жыл бұрын
Yew beauty I've been looking everywhere for how to line the timing up! Had no idea about the marks on the magneto and casing. Moines probably to dirty to see lol
@navyseabee72455 жыл бұрын
thos little rubber seals are valve guide seals.. the kit comes with 4 seals one for each valve.. LOL.. the not for the valve cover bolts..
@edward12361611 жыл бұрын
thoes little rubber seals u put on the cam cover bolts are the valve stem seals
@darrenhiles2639 жыл бұрын
Athose little plastic things you stuck on the bolts are valve stem seals champion .
@sirrick59
4 жыл бұрын
Valve stem seals - -Who, doing a job like this wouldn't know what they are? LOL LOL LOL
@cawalkabout
4 жыл бұрын
@@sirrick59 lmao when i seen them on the bottom of the valve cover i laughed so hard.
@Yoshij250GS12 жыл бұрын
little plastic picec you didnt know are valve stam seels. (remove valvesprings to change (big bar clamp and simple modified, cheep sparkplugkey) if pistonrings and zylinderheadgasket are new or good but engine is stil burning oil. better save that time for riding if not nessesary^^
@daveethetinnie12 жыл бұрын
Hmmm. My first thought are have you got the rings in the right position? the gap in the rings should be either diagonally opposite or at 45 degrees from each other. The oil ring maybe faces back.... It has been a while since I did it. I remember going to my local yamaha dealer with the piston and rings and talking to one of the mechanics
@kvette05311 жыл бұрын
can you tell me again what you did to the muffler i didnt understand but thats great, do you notice a power difference
@Vsploosh60004 жыл бұрын
6:40 those are valve guide seals
@duncanmantje3344
3 жыл бұрын
Yea they are spouse to go on before valves🤦♂️
@shckltnebay6 жыл бұрын
Did you change the jetting for that pipe?
@hondaxl250k012 жыл бұрын
so i just got my tt350 togather tonight.... and it smokes like hell... white smoke..... rings are new and i dont think a valve seal could leak that much oil.... idk... any ideas??
@mattlucas79887 жыл бұрын
Will this video also apply to an xt350 motor? I have to rebuild the top end on mine
@Fryesvan
7 жыл бұрын
Matt Lucas did you get yours done?
@gamerdominicano3949
5 жыл бұрын
I also need to rebuild mine but idk how to my piston blew and I think a valve but I don’t know how to
@CroseMrk212 жыл бұрын
Hey did you solve the leak on the rocker cover gasket ?
@cburford27307 жыл бұрын
What exhaust is that???
@eltorott35012 жыл бұрын
ey ermano yo tengo una moto igal pero no tengo las refacciones me podrias ayudar , es el piston, biela , perno, candados, anillos, no se si me puedas consegir un contacto..gracias
@shckltnebay6 жыл бұрын
Were those new cam caps?
@martinelliott3347
6 жыл бұрын
Yes although at the time I had no idea what they were for.
@danielevallainc25372 жыл бұрын
hi, where do you find exhaust pipe?
@bradsmith9496
Жыл бұрын
The pipe is a Staintune, made in NSW Australia.
@CLowXD33 жыл бұрын
What kind of exhaust is on it
@daveethetinnie
3 жыл бұрын
It's a Staintune muffler, modified and shortened slightly as well as repacked.
@christopherwilcox66243 жыл бұрын
oh my god brother please do not tell me you really believe that those green little rubber things going on boats please don't tell me that please disassemble. Motor right now and fix that please
Пікірлер: 30
Thank you for taking the time to make this video, I learned a lot from it and was able to rebuild my own top end on an 1998 xt 350 which is running awesome now.
i got it now:)!!! was a new junk head gasket!! it was letting oil pour into the combustion chamber... at least now i know how to build a mosquito fogger!! lol it runs great now.... cant wait to hit the forest on thursday...
Yew beauty I've been looking everywhere for how to line the timing up! Had no idea about the marks on the magneto and casing. Moines probably to dirty to see lol
thos little rubber seals are valve guide seals.. the kit comes with 4 seals one for each valve.. LOL.. the not for the valve cover bolts..
thoes little rubber seals u put on the cam cover bolts are the valve stem seals
Athose little plastic things you stuck on the bolts are valve stem seals champion .
@sirrick59
4 жыл бұрын
Valve stem seals - -Who, doing a job like this wouldn't know what they are? LOL LOL LOL
@cawalkabout
4 жыл бұрын
@@sirrick59 lmao when i seen them on the bottom of the valve cover i laughed so hard.
little plastic picec you didnt know are valve stam seels. (remove valvesprings to change (big bar clamp and simple modified, cheep sparkplugkey) if pistonrings and zylinderheadgasket are new or good but engine is stil burning oil. better save that time for riding if not nessesary^^
Hmmm. My first thought are have you got the rings in the right position? the gap in the rings should be either diagonally opposite or at 45 degrees from each other. The oil ring maybe faces back.... It has been a while since I did it. I remember going to my local yamaha dealer with the piston and rings and talking to one of the mechanics
can you tell me again what you did to the muffler i didnt understand but thats great, do you notice a power difference
6:40 those are valve guide seals
@duncanmantje3344
3 жыл бұрын
Yea they are spouse to go on before valves🤦♂️
Did you change the jetting for that pipe?
so i just got my tt350 togather tonight.... and it smokes like hell... white smoke..... rings are new and i dont think a valve seal could leak that much oil.... idk... any ideas??
Will this video also apply to an xt350 motor? I have to rebuild the top end on mine
@Fryesvan
7 жыл бұрын
Matt Lucas did you get yours done?
@gamerdominicano3949
5 жыл бұрын
I also need to rebuild mine but idk how to my piston blew and I think a valve but I don’t know how to
Hey did you solve the leak on the rocker cover gasket ?
What exhaust is that???
ey ermano yo tengo una moto igal pero no tengo las refacciones me podrias ayudar , es el piston, biela , perno, candados, anillos, no se si me puedas consegir un contacto..gracias
Were those new cam caps?
@martinelliott3347
6 жыл бұрын
Yes although at the time I had no idea what they were for.
hi, where do you find exhaust pipe?
@bradsmith9496
Жыл бұрын
The pipe is a Staintune, made in NSW Australia.
What kind of exhaust is on it
@daveethetinnie
3 жыл бұрын
It's a Staintune muffler, modified and shortened slightly as well as repacked.
oh my god brother please do not tell me you really believe that those green little rubber things going on boats please don't tell me that please disassemble. Motor right now and fix that please