A little trick id recommend to all new viewers is updating your volume settings, limiting the "max volume" (avoids someone cranking up your system to dangerous levels) and setting an "initial volume" level so your system will always be set at a safe volume level when turning on your receiver. This way you can avoid blowing out your system.

@eazie2003

3 жыл бұрын

learned this the hard way

@spotmebro3589

3 жыл бұрын

@@eazie2003 how I do dis??

@van_dutch

2 жыл бұрын

@@eazie2003 I also learned the hard way. Scared the sh!t out of every creature in the house!

@JoseFlores-kn3tt

Жыл бұрын

How do I get this on my TV

@bbmousedoowop

Жыл бұрын

My 7 year old granddaughter learned the hard way!

Great video. No sponsored ads, no talking about some other video. You hit record and jumped into it! Thanks!

first guy that actually goes through the receiver's menu, not like the other plebs on youtube! well done! :D

I literally just brought mine home today an setup this evening using my 5.1 system, until I upgrade to the true atmos speakers in a month or so. But maaaan, you saved my LIFE! My YPAO failed an everything was set to default settings, an you helped me sooooo much I feel like I should be paying you haha. This is the exact video I needed just simply going through and explain the basics of each category. Much appreciated 🙏

Just got mine delivered yesterday and setting it up today. Thanks for the run through!

Yamaha should hire you. New to the home theater world i was so lost and the included instructions are useless. You rock, thank you, thank you, thank you!!!

Fan-tastic!! I just bought mines and I had no idea what the hell was going on. Your tips are lifesaver!!!!

Thank you so much! I couldn't get our Zone 2 to work right and it turns out our setting was wrong. You covered it RIGHT off the bat. 2.25 minutes in and BOOM...we're rockin' out on the outside speakers. Mahalo from Oregon!

@sugarey

3 жыл бұрын

Glad the video helped. Aloha bruddah!

As a complete newbie learning the trade this video was extremely helpful to me. Thankyou

Highly recommend to set up color keys as dim + and -. This way, you can quickly dim the led panel for movie nights without having to dig in the menu hierarchy.

@alexgarza6195

Жыл бұрын

Great job

@ryanm2084

6 ай бұрын

I don't really notice the display because it's so small

Thank you so much!!!!! I want to learn how to set up and control the volume in my 2nd room same music but lower volume. You were fantastic. The guys that sold me the receiver were really transactional. They had no idea how to manipulate adjust or rather how to educate their consumers and they are a high end audio shop. So thank you very much!

Thanks for taking the time man! Helps me a lot cause I am a first timer in a Yamaha. Have been using Onkyo for the past 15 years. The entire menu and navigation, terms are so different here.

Thank you for adding the part at the end about having to recalibrate...I was messing with those settings and I couldn't get my front atmos speakers to work at the same time as my back surround...so recalibrating fixed it! wooohoo!

@sugarey

3 жыл бұрын

Glad to hear my friend!

Awesome video! Very informative. I'll be setting up my TSR-700 this weekend and now I'm even more excited.

@alexjohnston2734

3 жыл бұрын

How's it been so far? What do you have it hooked up to?

@alexjohnston2734

3 жыл бұрын

I got mine this week but the theatre room is still under construction. Thinking of pairing it with the svs prime satellite and sub package

first video so simple to understand. Thank You for the Video!!

Thank you Mr. SugaRey's with your settings demo it's a big help for me for setting up of my Yamaha Rx V6a when my orderd hdmi delivered.❤👍

Really helpful manage to sort my settings and now have a better understanding thanks.

Very helpful, got me lots of details about what I a, not doing right with my just-arrived unit.

Thank you very much for the walk through, Great Job.!!

Just so others know; I was having a problem where, nothing was working through any of my HDMI’s. The only thing working was my tuner. It was playing music fine. I tried resetting it and changing all HDMI cables to new ones. That didnt help. Then I did a software update. That worked and everything is back to normal.

Nice walk through helped out bud thanks

Continuing you did an awesome job !

Congratulations on the video. Perfect!

Great video. Explains stuff very good.

Thank you so much! Well done. This is so informative to me. You are the only one on line showing this. Thanks again buddy.

Great review and tutorial.Tyvm 🍻

Awesome video and straight to the point for us users who just want a direct orientation without having to dig through a manual, tracked like a tank brother. Semper Fi

@sugarey

2 жыл бұрын

Appreciate the feedback and glad it helped brother! Ooorah!

SUGAREY, you are a champion my friend, what a great walk through of the settings, Yamaha should pay you for doing their job, excellent job, thank you so much. Chjeers

@sugarey

2 жыл бұрын

Thank you for the kind works my friend.

Thank you for the info!

This is the first upgrade that I have done to my theater room since I had it built. In the next year I plan to upgrade the projector and blu-ray to 4K ultra.

What a great video , good job man 👏 🤟 no BS , straight to the point

Great video! Thanks

Excellent presentation Sir!

Just set mine up and this was extremely helpful. Better than trying to use the manual.

So AWESOME Thank You!!!!

Great video sir!! Thank you!!

Many thanks for sharing and helping me.

Thank you for this!

Good Morning Sir, thank you very much for your content. It's a great help!

@sugarey

2 жыл бұрын

You are very welcome

Great video and explanation! Thanks very much.

@sugarey

2 жыл бұрын

Glad it was helpful!

Awesome video!! Thanks for the help.

@sugarey

2 жыл бұрын

Glad it helped!

Thank you so much I have Yamaha rxv6a I had nothing but problems until I watched your video I couldn’t even login to my network

@sugarey

2 жыл бұрын

Glad the video helped!

FYI - The higher you set the crossover subwoofer the "more" it will work and kick in. If you don't want it to work as much as you stated in your video, set it lower at 80hz or below instead of the 100hz like you have yours set at. In my home system I have my subwoofer crossover set at in the 80 - 60hz range depending what music I'm playing.

@Turtleback8024

5 ай бұрын

How do you cross a subwoofer over on the V6A? I could cross my L+R, C, SR, SL over to their respective crossover points. But the subwoofer doesn't have a crossover setting at least on my V6A? In regards to having to crossover your speakers higher to get the subwoofer output (I guess you're referring to 2ch stereo listening?🤔), I've heard that to get the subwoofer output in 2ch stereo , you'd have to configure your speakers differently from the YPAO settings, i.e FRONT: Large, with EXTRA BASS turned to "ON", meaning you'd have to run your FRONTS "Full range" and EXTRA BASS will bring the subwoofer on. Terrible bass management by Yamaha!!! Now there's extra demand on the Receiver, and added load on the speakers, risking the Receiver's possibility to run hot! This is just weird!!!

I was thinking about this and having second thoughts about updating my old system from 1993...JVC 5.1, until you showed the rundown of the remote and screen setup navigation. Thanks . I just need to pick the AVR now. Looks the Yamaha is very similar to the older system, which works great too.

@sugarey

3 жыл бұрын

If you’re used to the 1993 setup and features you’ll really appreciate what you get for the price of this Yamaha. The mic pickup setup is a big jump start to getting things configured.

Thanks for the video

I like the fact you went through everything. I would like to hear an overall opinion on what you think about the system.

@sugarey

3 жыл бұрын

I like the sound of this receiver. It’s “warm” as in not harsh on the loud booms and consistent even at low volumes (with settings suggested). Hope that helps.

Terrific. Thank you

Thanks, very helpful video. I am having a problem. I can't get the system to use the 2 rear speakers. The speakers seem to be working in the test zone, but I can't get the 2 rear speakers to work. Any suggestions?

Great video I can’t find part 2 ! Any help?

THANKS!!

Tthanks for responding to my question a few weeks ago...your suggestion worked..NOW I have another problem - This morning, I turned the yamaha TSR-700 on, then watched some youtube, then we watched TITANIC....but while we were watching the movie, I pressed SET UP..but the settings did NOT appear,, I tried OPTIONS...still nothing! The Yamaha was working last night, even with the headphones plugged in...but I unplugged the headphones this morning... ..nothing... now, keep in mind that the remote control DOES PARTIALLY work.. it will adjust the volume of the sound, I can select STRAIGHT or any of the surround modes.. YET.. I can not see SETUP... do you have any suggestions how to restore the SET UP or OPTIONS? THANKS!

Thanks for all of this information. So much to go through initially. Question, I have my cable box, Apple TV, and a PlayStation in first 3 hdmi inputs with the output to the Tv. Upon startup, receiver automatically starts in “TV” mode and I have to change the source to hdmi 1 every time I turn it on. Is there any way I can make the hdmi1 the default startup port? Thanks for your time!

Thanks for your video. We have theRX-V4A though some menu items are different, still helped a lot! I have a question about the backup. After we finished setting up, I went into to backup and it said it was executing backup, but then said backup failed. Tried twice without success. Any ideas?

Gran trabajo gracias

Is the Center Spread function still available with the Dolby Surround decoder in the current firmware?

Well done.

Your video is by far the best I’ve came across, super helpful. I have a slight problem, I watched a movie today and periodically it would cut off sound but quickly came back, any clues on how to solve that?

@sugarey

3 жыл бұрын

I’d do basic cable checking. As in; are they seated properly, not crossing any power cables. If so also check TV for “hdmi enhanced setting” on that input. If still persistent change HDMI mode to mode 2 on the Yamaha. Hope that helps.

Thank you sir

when u did your HDMI labels, where exactly are they supposed to show up?? is it inside the HDMI setting where you label it? (like your xfinity) or is there a way to have the label show up BEFORE you drill into edit the HDMI name? TY Excellent explanation of all the settings on that unit 👍🏻 Seems like a great value entry-level A/V HTR receiver

Very nice walkthrough of all the menu options. I'm planning to buy this amp so this video will save me a lot of time when I install it. Just a question, do you know if it's possible to have 5.1.2 config with Bi-AMP'ing to the front speakers? Thanks! ;-)

@sugarey

3 жыл бұрын

If I recall bi-amping is like a pre-amp where the signal can pass through. If that’s what you want to do yes that should work. Is your goal more front/left-right action? Another option is using Zone 2.

Very good video

We are trying to get the TSR-700 to work a Samsung UN65TU 7000F TV using cable and a single remote and Alexa. The question I have is the main zone always powers up to HDMI 1 and so we always have to change to HDMI 2 where the cable box is. I did not see anywhere in this video where I could change the default zone to power up to HDMI 2. My older receiver just stays on the last Input played. Can I either default mine to default to HDMI 2 or even last zone played?

Thanks !

Very useful

What do you use for the surround mode? I am using the AVR in TV Audio mode using the E-Arc. TV does see the AVR as a Dolby Atmos device just fine. No inputs thru AVR. I want the AVR to be in an Auto decode mode pretty much, just decoding whatever the TV puts out. I sit best to use Straight mode so the AVR does no extra processing, or should i manually set it to Dolby Atmos? Thanks!

Thanks for the information! When I turn on my xbox it switches the AV input to my TV. If I switch the AV to my xbox setting it won't show the picture, but if I turn off my xbox then switch to the AV receiver then turn it on everything works fine. Any idea on how to get the receiver to stop switching the input when I turn on my xbox? I also had one day where none of the inputs showed video. I had to cycle the receiver by holding the power button until it blinked, I hope this helps anyone else with the issue.

hello, excellent video, but I have a question: The first is in relation to xbox series x, my rx-v6a already has firmware version 1.53, but in the console configuration the ALL-VRR function appears disabled. what would cause this problem? thank you very much for your videos.

Best video sar

also great vid!

I have a Yamaha TSR-700 with a 7.1 speaker setup. Sound works great when on my Bluray 4k Player, decoding 7.1 ch sound track and all speakers work as they should. When I switch to my NVIDIA Shield and stream 5.1 ch encoded content, the rear speakers get disabled and the left and right presence speakers become the rear speakers. It is absolutely driving me insane on how to fix this. Is there a setting that I need to use ... there many other people that are struggling with this.

Do you know if I can add wireless speaker to existing 5.1 wired speakers setup? Thanks!

Semper Fi! Great video. ATMOS I have the speakers to support the RXV6. My question is do you have to select this option in settings or is it automatically playing through the speakers? Thanks..

@sugarey

2 ай бұрын

Oorah! Appreciate your feedback. If the ATMOS speakers were connected to the proper connections it will recognize and set them up during the YPAO setup as “5.1.2”. You can always check during the individual sealer “tone test”.

Hello everyone, Thanks for the great video. Unfortunately my Onkyo 717 is broken. Now I'm looking for something new. Will the RX-V6A or TSR-700 go with my speakers? Will he be able to rock those poorly responding speakers? Kef C 6LCR, 8 ohms, 10-150 W, 90 dB, 65 Hz - 40 kHz Quad 21L2, 6 ohms, 40-200 W, 88 dB, 35 Hz - 28 kHz Wharfedale WH-SR 2, 6 OHMS, 10-120 W, 88 dB, 80 Hz - 20 kHz

I also have the Yamaha 700 w/ 2 Elac 6.2 bookshelf & matching center. 2 Polk bookshelf and 10" sub.My center tweeter doesn't seem to work . Am I doing something wrong ?

Please, how how did you get the menu on TV screen?

Hello I just have a question for Tsr-700 how come I have to go all the way the volume up to 65 to able to hear all the speakers. Please advise thanks

Hi, this unit have some cooler inside for temperature treatment?

Can you use Surround Back and presence to drive 2 pairs of speakers in zone 2 ? This is of course if you only choose 5.1

Nice video. If you choose to set up speakers in zone 2, can you play a different source than what might be playing on the receiver while using the TV. Confused as to whether adding an additional amp is required to push a source (i.e. radio, something over bluetooth like spotify, etc.) to the zone 2 speakers.

@sugarey

Жыл бұрын

It’s meant more for using the same source. You can change the volume though.

Thanks!!! This really helpful for someone who doesn't have the experience of adjusting sound and video for optimal use. Q: is there a way to adjust the incremental step of the volume control either for the remote and/or knob on the receiver.

@sugarey

3 жыл бұрын

When you say incremental are you looking for smaller “gains” as in; fine tuning volumes? If so no BUT the default incremental are very low gains so default fine tuning has been pretty flexible.

@azndoodle1

3 жыл бұрын

@@sugarey actually I find the gains increments too small (I have to press the volume button so many times to get significant increase in volume) . I was hoping to adjust from 0.5 to bigger steps.

Hey sugarey which Yamaha app do you recommend for my Yamaha av rx6va the one inIoaded from play store does no seem to work after I added the IP address ? I’ve tried everything?

I’m not able to get the setup menu to show up. Pressing the set up button nothing nothing for some reason. Any help?

How to make the display light only the letters? Because mine turns on the backlight too and I think it's ugly.

Extremely helpful, thanks! I have samsung 4k tv q80T qled connected via eARC. Do I leave the upscaling 4 k in receiver off or.on? I noticed you had it off

@sugarey

3 жыл бұрын

I’d keep it off. I think your QLED will have better upscaling.

I'm planning to buy it.. I read online that eARC has bugs, however, I only need it for dolby atmos movies streaming from Netflix and Amazon prime movies. Will it pass through the signal from my Sony TV x900h to the V6a avr without issues and bugs (Using eARC) ??

Looks like you've had this system now for about a year, tell me how it's performed over the year?

How can I get the volume level of Yamaha to display on TV screen ?

Great video, thanks! So you have your cable box connected to the AV. That means you have to run the AV every time you watch tv? I was going to leave cbl plugged directly to my tv and run audio out of tv to AV via component cbls since I only have 2 hdmi ports on the old tv.

@sugarey

3 жыл бұрын

I do run the AV all the time. If you’re ok with running two remotes you could use the power button on TV and AV. So if your power on your TV it won’t turn on your AV kind of action. There’s a little more to it if your interested.

@mikeh1811

3 жыл бұрын

@@sugarey I decided to use a hdmi splitter switch, to switch cable box (source) between my tv and the AV for the occasion there's a program using Dolby I'll want to hear. Thanks for responding! . Weeks later update: I discovered I can play stb/cbl source through AVR while it's turned off (it passes thru). The stb/cbl input must have been selected at AVR power off. I don't need that switch box.

Hey Rey, love the video. One of the things I haven't seen is an option to enable Dolby Atmos on surround decoder type. I'm running a 5.1 setup right now so I'm wondering if because I don't have the atmos speakers, it does not give me that option. If you've run with a 7.1 setup before with speakers for height, have you been able to select a "Dolby Atmos" decoder type? Thanks!

@sugarey

2 жыл бұрын

Apologize for the delay. Yes at this time if you don't have ATMOS speakers wired it will be "greyed out". You have to choose to run 5.1 ATMOS or 7.1 DTS. I ended up with ATMOS due to more movie watching for me.

@leoMichigan

Жыл бұрын

@@sugarey , I have a 7.2.2 setup but I can’t find this option at my yamaha receiver . Would you know where to find it in the receiver? Maybe it has a different name… but basically I have 2 Atmos speakers and 2 subwoofers on the floor 15 inches each, along with 7 in-ceiling speakers. Btw, I have different impedance for different speakers… need to see if I can setup impedance individually for each speaker.

i have the tsr700 and the sub output is almost nonexistant unless i max out the bass settings in the amp which makes the bass sound unnatural and sythesized. how do i fix this?

Thanks so much SUGAREY! This helped a lot! One quick question. I am setting the levels on my TSR-700. What volume level should I set the receiver at, when using the test tone to read the tone with a decibel meter? I am only able to achieve 57dB, and not the recommended reference level of 75dB. I am using Klipsch Reference speakers, which should easily be able to handle the load.

@sugarey

3 жыл бұрын

What I do is start with the YPAO/RSC configuration. Which then I believe the sweet spot for my TSR-700+Jamo speakers is ~56-60 volume (I change from db). From there I use the test tone and distant to tweak to my personal preference. Hope this helps.

@johnnybolton6524

3 жыл бұрын

@@sugarey Thanks! I initially ran YPAO. I still wasn't pleased. I did adjust back to dB volume, set to 0dB, and used the level settings. The biggest difference was a surround setting was set to a music hall. I changed to standard. After the changes, it ROCKS! Everything I expected. Paired with Klipsch reference speakers, larger center channel, and front bookshelf speakers, the TSR-700 is a sweet machine!

@9816133

3 жыл бұрын

@@johnnybolton6524 p

Great video really helped me out with setting up my system, I had a question relating to the crossover for the subwoofer. Is there an option within the Yamaha to set the crossover or did you set it on your actual sub? I see some people turn the crossover knob all the way to LFE but I dont know if thats what we should be doing with this receiver, thanks!

@sugarey

3 жыл бұрын

I appreciate the comment and glad I could help my friend. If you set the speakers to 80hz for example - your sub will receive signals 80hz and below. I typically match my sub setting to match what the receiver crossover is set at. As a side note I have the volume at 3/4=75% when I use the YPAO/RSC setup. Hope this helps.

@Joshmedo

3 жыл бұрын

@@sugarey Thank you!

Sugarey...well done and worthy of a like AND a subscribe. Question. With eARC, is there any reason to keep plugging all of your inputs into the receiver? With the capability of HDMI these days, why not plug blue-ray, PS2, etc, into the TV, then get your audio via eARC to the receiver?

@sugarey

3 жыл бұрын

If I could hide all the cables in-wall I would go definitely run all HDMI direct to TV then eARC to receiver purely for video quality. For my current application I run my them through receiver so there’s only one HDMI and power through my cable management rail. Dolby ATMOS requires eARC but sounds like you’re all good my friend.

Love you SugaRey wish you were my neighbor. Thanks so much

Very good Video , explaining important parameters. I have this connected to OPTOMA projector and after some time into playing my HDMI source ROKU 4K , suddenly it freezes and Projector says NO HDMI signal . I hear a CLICK sound in my Receiver before this happens . I have to reboot all machines , at times - Initialize the settings to make things work again . I also see that Receiver stops recognizing the SOURCE ( initialy used to say Roku /Firestick ) when this event happens. Audio though is On through my speakers. Could you please suggest what is going wrong on the settings OR what setting should I put to stop this from happening

@sugarey

2 жыл бұрын

Apologize for the delayed response. Have you tried to have your projector accept "enhanced" HDMI?

Thank you. Very straight forward and easy to understand video. I have one question. I have WII that connect to receiver in HDMI 7 plug via Wii to HDMI convertor adaptor. Everything working fine but when I change my scene to WII and click setup menu button on receiver, it does not display on TV screen including turning up/down volume display. Any thought or suggestion for this issue. Thank you in advance.

@sugarey

3 жыл бұрын

Try Settings>HDMI Format>Mode 2. Also check your cable and if needed try a different port on the back of the receiver. Thank you for watching the video.

@AmbaviBhimani

3 жыл бұрын

I have use web interface setup to correct that and now is working fine. Thank you for your response.

How can i set up all speakers 7 of them (not the subs) at the same volume

I couldn’t get the menu to pop up on my tv. Any suggestions?

Huge help! Yamaha needs to hire this guy to write a proper manual for this thing.

@sugarey

3 жыл бұрын

Thank you for the comment David. Glad the video helped.

I am using a RSL Speedwoofer 10S MK2 with this receiver and the sub has a setting for life and it uses the receiver's subwoofer crossover but there is no subwoofer crossover setting for the sub