Yamaha Thundercat Carburettor Clean
Автокөліктер мен көлік құралдары
Yamaha Thundercat Carburettor Clean How did this bike even fire up with carbs like this take a look and see what we found in the bowls..
If you would like to support my Channel, You can check out my Amazon Wish List and buy something for the channel.
www.amazon.co.uk/hz/wishlist/...
Merch Store www.ebay.co.uk/itm/165190133418
Stuff I use.
My filming equipment.
Huawei P30 Pro :amzn.to/2CImtyA
Rode Wireless Go Mic: amzn.to/3h8WP5n
Boya external microphone: amzn.to/3g3zZv9
Tools..
DeWalt Drill and Impact driver :amzn.to/3g51C71
Wire stripper: amzn.to/3g6RUkK
US Pro Driver Bit Set: Screwdriver Bits Torx / PZ / PH / Flat Hex Spline Extra long Security 50pc AT822
Music creditited to Kevin Macleod www.incompetech.com
Пікірлер: 105
them carbs were shocking well done on the clean Gary keep the videos coming
@ProjectMan
2 жыл бұрын
Cheers Chris 👍🏻
They were well cruddy, but clean now
It's a long time since I've seen that much crap in a bank of carbs...well done Gary..
@ProjectMan
2 жыл бұрын
Cheers rob thanks for watching 👍🏻
Fantastic job Gary it is amazing the bike started with the carbs in that state 👍👍👍👍
New to this channel. This guys videos are great, very informative with much detail. My son just bought an 02 yzf and im gonna be going through the entire engine. Keep posting vids my friend, i wouldnt know where to begin without them
@ProjectMan
3 ай бұрын
Nice one enjoy 👍
You’re a life saver! Thank you so much for making this video!
@ProjectMan
2 жыл бұрын
Cheers bud 👍🏻
Nice work Gary. 👍
My goodness Gary, those carbs were in a shocking state, well done to you. You did good….thank you
@ProjectMan
2 жыл бұрын
Cheers thank you 👍🏻
Wow those carbs were the worst I've seen. Amazing it ran at all.
@ProjectMan
2 жыл бұрын
Cheers Paul 👍🏻
Well done Gary great job thanks for the video,keep up the good work 👍
@ProjectMan
2 жыл бұрын
Cheers mate 👍🏻
Nice carb cleaning job. I like your vintage Texaco sign. I had a Texaco station 40 years ago.
@ProjectMan
2 жыл бұрын
Nice one that sign is a reproduction 👍🏻
I thought clean my Honda mower carb was a crap job 🤦♂️, you had your hands full there Great turn round Gary , & 10p for the cleaner 😂 , gotta love the old man comes wandering in as soon as there’s a bit action haha great stuff , looking forward to the next bud 👍
@ProjectMan
2 жыл бұрын
👌👌
well done gary good job keep up the good vid on the channel thanks lee
@ProjectMan
2 жыл бұрын
Cheers Lee 👍🏻👍🏻
Great Video! Thanks for Sharing.
Superb work so far Gary sounds sweet. Catch you in the next one
@ProjectMan
2 жыл бұрын
Cheers Neil 👍🏻👍🏻
Got to be happy with that mate.
@ProjectMan
2 жыл бұрын
What a state they was in nat never had anything like that before 👍🏻
@NatsNackersYard
2 жыл бұрын
@@ProjectMan me neither. Nasty! It ran so it obviously wants to live!
@ProjectMan
2 жыл бұрын
💪🏻💪🏻
bike was sounding better than when you first started it
@ProjectMan
2 жыл бұрын
Cheers Tim 💪🏻
awesome gary
well done fella,top job,i must clean my xr250r carb,its starting to leak when the fuels turned on,
@AliMackMechanical
2 жыл бұрын
How's it going buddy
@ProjectMan
2 жыл бұрын
Cheers bud 👍🏻
@MINIMOTOMADNESS
2 жыл бұрын
@@AliMackMechanical dude i"m good too,hope your well?project man rocks,just like his pops martin,
Doing well Gary channels doing great! Wicked content and merchandise is excellent quality! Nice one mate
@ProjectMan
2 жыл бұрын
Thank you 👍🏻
@Ivory663
2 жыл бұрын
@@ProjectMan looking forward to your new project
Worst I have seen them carburetors nice clean up job 👌👍
Same bike as mine and also in same colour scheme it would appear. Ideally should have checked all the float bowl levels whilst the carbs were off, think its something like 12mm below the marks on each carb. Also grab a cheap 4 gauge vacuum balancer, makes that idle sound even better and will run smoother on the road.
Nice job Gary
@ProjectMan
2 жыл бұрын
Thank you Henry 👍🏻
Nice bike Gary
@ProjectMan
2 жыл бұрын
Cheers martin 👍🏻
👍👍👍 good stuff Gary lad 👍👍👍
@ProjectMan
2 жыл бұрын
Cheers Andy 👍🏻👍🏻
Core the state of them carbs good job gal I'm surprised it even ran with them float bowls gunked up that much 👌🏻
@ProjectMan
2 жыл бұрын
I was surprised to Dan 👌👌
Nice bit of work there Gary mate
@ProjectMan
2 жыл бұрын
Cheers bud 👍🏻
Thank you very much for your video on the yamaha thundercat carburetor it helped me a lot to restore the carburetor of my motorcycle 👍🏻👍🏻👌🏻👌🏻👌🏻
@ProjectMan
Жыл бұрын
Your welcome 👍🏻
@MichelMarie-vh4lp
Жыл бұрын
@@ProjectMan my motorbike runs like a Swiss clock now 😉👍🏻👍🏻
@ProjectMan
Жыл бұрын
Nice one 👍🏻👍🏻
Bon boulot mec👌👌👌
Great carb clean Gary especially with that crap in.I got myself one of them jumper packs after your dads review and it's been a godsend.
@ProjectMan
2 жыл бұрын
Handy bits of kit nev 👍🏻
@Kyokunek
3 ай бұрын
Which jumper pack was it?
@ProjectMan
3 ай бұрын
Topdon 1200
sounds good now mate
@ProjectMan
2 жыл бұрын
Cheers dave 👌
Dang you made that look easy this 1 looks like its gonna be alot harder than that unfortunately
@ProjectMan
2 жыл бұрын
Cheers bud 👍🏻
Gaza Those carbs were bad now the engine can suck the fuel through clean jets it sounds just perfect mate your doing a good job it is years of neglect and none servicing this bike will take down the road again like it's not done for years Phil In stoke
@ProjectMan
2 жыл бұрын
Cheers bud sounds sweet now 👍🏻
A good job.. sounds nice.. they was a funny noise at the end . Oh sorry it was the old man lol
@ProjectMan
2 жыл бұрын
😂 I'm sure he will have something to say about that.
@retrorestore
2 жыл бұрын
When you are a big UK KZreadr, you are above comments like that
@themowerman
2 жыл бұрын
@@retrorestore comments like what ?
Worth there weight in gold them cleaners mate looked like new when finished good job mate
@ProjectMan
2 жыл бұрын
Cheers rob great bits of kit👍🏻
Good job Bert . See old Hinge makes a appearance .
@ProjectMan
2 жыл бұрын
I'm trying to promote him a bit Pete 😂
@petefroud5308
2 жыл бұрын
@@ProjectMan 🤣🤣🤣🤣
Now I know why the brake reservoir looked so bad too, something tells me this bike has had zero maintenance from new, fan video, just catching up with all my favourite youtubers
@ProjectMan
2 жыл бұрын
Cheers Steve 💪🏻👍🏻
Might be worth putting an inline fuel filter....sounds sweet.
the two cylinder keys look like a bike lock keys or the disc lock you put on the wheel
@ProjectMan
2 жыл бұрын
Disc lock bud. 👍🏻
Could have put them in the ultrasonic cleaner it would have saved you some time cleaning, nice job
🏍️
I'm loving the tent garage. Just what I need. Did you buy it or make it?
@ProjectMan
Жыл бұрын
We made it
nice video gary what is that music called
@ProjectMan
2 жыл бұрын
Sand castles it was on the KZread library
I have to put new diaphragm on my carbs...is this a hard job to do once carbs are off??? Please any help is needed
@ProjectMan
Ай бұрын
Easy when carbs are off
Oh my word those poor carbs :(
@ProjectMan
2 жыл бұрын
Not to healthy 😁
God they look a mess gaz but sounds awesome now
@ProjectMan
2 жыл бұрын
Cheers bud 👍🏻
Is oring or rubber seal at minute 4:45 ?? Becouse mine are very flat . Thankyou
@ProjectMan
4 ай бұрын
Yes rubber oring
@grosumihai9341
4 ай бұрын
@@ProjectMan you do a good job , i apreciate !! Thankyou
They where well full of crap Gary mate. Lol ten pence find should be a good bike for someone in the spring.
@ProjectMan
2 жыл бұрын
Cheers Ali crazy it even run 😂
carbs so dirty oh my !!!
How long did that take to do?
@ProjectMan
2 жыл бұрын
Not long within the hour
@daveallen524
2 жыл бұрын
@@ProjectMan always doubtful of trying anything like this on mine but maybe I should just get on and do it 👍🏻
@ProjectMan
2 жыл бұрын
Go for it mate 👍🏻