Iv done this so many times! But it,s always good to watch how someone els dose it👍

@tomstc

2 жыл бұрын

Cheers

Very good! 👏👏👏👏👏

Thanks for taking time to explain how it's done, very usefull for someone like me who just bougt MT 01. Aaaaaaaamzing bike by the way 😍😍😍😍

@tomstc

8 ай бұрын

Glad I could be of service, thanks for watching and thanks for the comment

Great video, thanks!

@tomstc

Жыл бұрын

No worries

Thanks!!

@tomstc

Жыл бұрын

No problem

In my mt01 manual, it says 4.1 l with oil filter replacement ...

Hi, great video! Do you have links for the rectifier cover, oil temp cap and if possible link for clutch and brake fluid tanks? Many thanks, Richie 😎👍

@tomstc

5 күн бұрын

Here is the oil temp gaugewww.mandp.co.uk/products/yamaha-mt-01-oil-temperature-gauge-682774

@tomstc

5 күн бұрын

Hi, thank you. If you go to my website and email me I will send over details for the rectifier cover. The clutch and brake tanks I brought used, I've not been able to find them when asked before but any Chinese fluid tanks with the mount at the bottom will do.

Hello from India!! Great Video! From where I can get the oil temp filler cap?

@tomstc

2 жыл бұрын

Hello! Thanks for the comment, I use this one I wonder if they will send to India? ebay.us/3NtQum

Hi TOMSTC, can you point me in the direction of the gentleman who can produce that rectifier cover? Thanks for the video btw I'v just bought a MT01 with 18k miles on the clock in fantastic condition (stoked)

@tomstc

Жыл бұрын

Hi, thanks for the comment are you on Instagram check me out on there @thetomstc and Message me if not contact me on my contact section on my website tomstc.co.uk

Thank you for the video. I would like to know if you have the K&N air filter on your MT

@tomstc

Жыл бұрын

No problem glad you liked it, I currently just run a standard air filter

@jaroncorleone

Жыл бұрын

Good afternoon Tom!! Do you know the size or diameter of the oil tank plug washers? And those of the carter plug? thank you

@tomstc

Жыл бұрын

@Jaron Corleone there are no washers on these. What do you mean Carter?

@jaroncorleone

Жыл бұрын

@@tomstc the bike has two plugs, one for the deposit and the other one on the engine. Right?? This plugs don´t have any metal (aluminium or coper) whashers?

@tomstc

Жыл бұрын

@@jaroncorleone no not as far as I'm aware, even the manual doesn't mention it

Hey Tom, I thought Yamaha recommended 20w40 oil for the MT01. What is your experience with the 10w40? Thanks!

@tomstc

2 жыл бұрын

Hi, yes correct but this was recommended by a few others and it is perfect

@Boxer4ever

2 жыл бұрын

Motul 7100 20W-50 all the way. Specially designed for this bike.

@ROTlNAJ

2 жыл бұрын

@@Boxer4ever too late :p

@tomstc

Жыл бұрын

Just an update bike is running fine

@ROTlNAJ

Жыл бұрын

@@tomstc Same here, used the same oil as you! Thanks :)

Why would you ruin your cup of tea by putting the sugar in with the tea bag then adding the hot water? Always wait until the tea has steeped and the bag is removed!

@tomstc

4 ай бұрын

This is a tried and tested tea making procedure

Bonjour de France ! J'ai une MT01 également sur le carnet d'entretien yamaha il est écrit 4L1 d'huile , mais en suivant ton tutoriel j'ai été obligé de mettre 4L8 Tu pense que c'est normal ? J'ai remarqué que tu as mis 5L Merci d'avance pour ta réponse qui m'aidera fortement :)

@tomstc

2 жыл бұрын

As long as the oil level is correct on the dipstick you should be fine. But if you are unsure drop some out of the oil tank. Thanks for watching

@pierrotpierrot7860

2 жыл бұрын

@@tomstc avec 4L8 d'huile je suis exactement au niveau moyen . En ayant démarré le moteur 1 minute avant de prendre le niveau Ce serait bon pour toi tu pense ?

@tomstc

2 жыл бұрын

I think it will be fine, the manual always advises for the minimum level to allow for oil that does not drain. My old GSX1400 was 4.3 liters of oil I used to put in 4.6 liters to get it to halfway! Mine has been fine since I changed the oil

@pierrotpierrot7860

2 жыл бұрын

@@tomstc merci beaucoup pour tes réponses tu me rassure énormement :) continue tes vidéos pour nous donner pleins de tutos :)

@tomstc

2 жыл бұрын

@@pierrotpierrot7860 thanks I'm glad you like my videos. My wheels need a repolish so probably do that next

Can this bike be lowered?

@tomstc

9 ай бұрын

I'm not sure, the under slung link is quite compact.

@tomstc

9 ай бұрын

Hi I found this today Hyperpro 30mm Lowering kit ebay.us/EO11sd

@mrinvisible9175

7 ай бұрын

Yes it can , yes it can by 1/2 inch.