What did you think about the Yamaha MG10XU? Do you believe there's anything I missed? Let me know your thoughts in the comments!

Just do a google search an you'll see something to the effect of": "Any dynamic microphone with a low impedance balanced output, like the SM58, is not affected by phantom power. Phantom Power will not damage a professional dynamic microphone."

Waiting on this in the mail, thanks for reviewing!

You can get a cable splitter so that more than one headphone can be used.

You deserve more viewers Keep it up man!

Great review, thanks.

about your headphone situation, just get a headphone amplifier with the 4 xtra ports to hook up more headphones

Great for backup. It's analog but sounds clean. Built well, typical Yamaha.

Most non condenser mics won’t be effected by the 48v. I have done a few recordings with my friends on this console, I use a blue ember mic and my other mics are SM58s and they don’t need phantom power, but they have been working perfectly. Just watch out if you are using a cheaper 30-75$ dynamic mic cause that could be harmed by 48v but not majorly.

@TheSokodelic

3 жыл бұрын

Yeah, you should never use phantom power on mics that don't require it. You could end up causing damage to both the mic and possibly the mixer itself.

Just purchased this, seeing if this will help with the power hungry mics I have. Starting a podcast and Amazon has amazing return policies that have helped me… financially lol if something doesn’t work out

If you're a musician or a beginning sound engineer, this is a good tool. But if you're just another twitch streamer that mostly want a mic to talk into, there are cheaper less complicated mixers.

How did you sync the audio from this mixer to your video in your live streams? Was it an easy process?

I'm confused, this is suppose to have two USB ins and 2 USB outs. And yet there is only one row for USB. Also, I'm confused how to apply an effect and assign it to one row, then assign another effect to another row. For example, I might want to apply one effect to a mic vocal input, but another effect to an instrumentl input.

i went for the mg12xu for the faders, off buttons and 2 extra channels. Hopefully it'll become in good used lol

@mr.honesty5115

2 жыл бұрын

I thought about that too but realistically I’m never gonna use the extra channels so I went with the 10.

Nice video, but I have a question: If I connect my headphones straight to the Phones Input of the MG10XU, do I hear myself while speaking through the mic or can I disable that?

@yuma_ng

2 жыл бұрын

You can disable it by moving the nop from mic input to pc output

@Drmikaeru

3 ай бұрын

@@yuma_ngcan you hear PC output and mic input at the same time?

@yuma_ng

3 ай бұрын

@@Drmikaeru if u move it in the middle yes. One side is pc and one side is mic. If u have it in the middle or a small pref to one direction, u will hear both

Is there a way to stop hearing my voice when talking on the mic ?

Hi. Is it good for dubing

Dynamic mics are fine with phantom power!

Would you take this over the rcf

Can I use something like this to record music? I have a Focusrite scarlet but just don’t like it 🤷‍♂️

@dougclendening5896

Жыл бұрын

Yes but you only get two channels. Left and right.

Hi , I use this mixer and really enjoy it however I have one question.. I use an inner ear monitor that is hooked up the the phones jack .. I use some reverb while singing .. is there a way to cut the reverb out of my in ear mix without turning it off ?

@dougclendening5896

Жыл бұрын

Do the reverb from a effects plug in in your DAW instead. Otherwise, no. This is made for live performances really.

Is your voice on fast foreward? Or do you just have an unusual cadence?

One major pro is that you can monitor "after" the DAW. (Final product) live via the USB IN from your computer and flipping a switch on the board. As for more than one person monitoring, just hook it up to a 4 port headphone amp. The downside is that you can only record two channels from it into the DAW. Left and right.

This seems like a great mixer but I think I've had two lemons in two weeks and Yamaha support isn't helping. The circuit board seems loose when you pull on the knobs near the lower left corner. I've returned the first one to the store and the 2nd one is a little worse. I've made a video for support, but they said it's normal. This can't be! Can you verify on yours, please? @ Thanks!

@TheHexeract

2 жыл бұрын

Well designed, poorly made Chinese crap.

for under 50 bucks you can get a 4 out headphone amp and you can adjust the volume as you want.

You sound just like the dude on "Fast Times At Ridgemont High" that scalped concert tickets...lol

man this looks so complex lol. i liked the creative one but it doesnt have eq right?

@TechSummitTV

3 жыл бұрын

The Creative Soundblaster K3+? That one doesn't have EQ settings built in.

@TheRalphRoast

3 жыл бұрын

@@TechSummitTV it has high and low adjustments

Molto professionale Suno brillante

I have this and its getting too hot while using. Is it normal?

@TechSummitTV

3 жыл бұрын

It's not the most pleasant thing about it, but it does have a very hot spot near the power switch.

@jhavinayak07

3 жыл бұрын

@@TechSummitTV Thanks for replying. So getting it to service centre will help ?

@TechSummitTV

3 жыл бұрын

@@jhavinayak07 I think it's just an inherent issue with the product. More like down side rather than a defect. So I don't think the help center would help much.

@jhavinayak07

3 жыл бұрын

@@TechSummitTV you have really placed your words so well. Thanks for such a clear explanation. Just a last question In that case shall I use it continuously even if its get hot or we need to switch off give it rest and break on between Thanks and God bless

@TechSummitTV

3 жыл бұрын

@@jhavinayak07 Glad to help! And no, you can keep using it. I like to turn mine off only when I'm done using it.

sabaa nimo oi

Why do you sound muffled?

@ee1yd

3 жыл бұрын

shitty mic settings

@adeptusmaximus

9 ай бұрын

All that gear and this kind of output hahaha

It’s not for podcasting. It’s for live music

Just become an audio engineer bro 🤑

Huge audio issues impossible to hear what he is saying at least if you are over 40 😅

Im tempted to buy this, but i ended up buying Yamaha ago6….its simple and amazingly simple

people disliking cuz u didnt know something. smh

You need a headphone amp.

your voice sounds plastic and muffled with all the processing that you are doing. Kind of like bad auto tune!

I wanted to watch this video but couldn't handle the extremely muffled sound. Sorry.