Thank you for the video. Just bought a Yamaha 115. Another favorite channel is Dr. Shawn Baker. He will set you straight.
@raymundlorenzo3829 Жыл бұрын
just what I was looking for as I have the same exact outboard! much appreciated!!!
@goosehunter82402 жыл бұрын
Great video. Thanks for the part numbers.
@billmaindonald33102 жыл бұрын
thanks, hope its a easy as you made it look.
@MisterBigDave3 жыл бұрын
I just did mine.. 2001 115 Always a big mess PITA. Terrible design! BUT, it’s done LOLOL My thermostat was bad too. Your son is awesome helper!! All the best from NJ!
@xt02832 жыл бұрын
Thanks, really helpful!
@brandonhommell74722 жыл бұрын
Excellent video; super helpful! my first outboard turns out to be the same exact engine. Thank you so much Wish you had some more on outdrive oil change and diagnostic software integration. 😉
@markmontgomery25622 жыл бұрын
Thanks bud , I could not even find the drain plug.
@ZackW-jn5vf11 күн бұрын
Good help!
@billbobyadigg65252 жыл бұрын
u the man
@deerhunter6133 Жыл бұрын
TIP FOR REMOVING ANY OIL FILTER: Run the engine to normal operating temp. Oil filters will be MUCH easier to remove.
@kaledelabed76093 жыл бұрын
What about the other seals?
@alecmorrison11037 ай бұрын
If you trim it all the way up, makes less of a mess
@albertshilton5336Ай бұрын
Than k you for your comment about the environment! Great job. What’s your son’s name?
@brianabelaye90952 жыл бұрын
Very informative. Do you have one on replacing your water pump or impeller?
@robertsonfamilyadventures7082
2 жыл бұрын
Not yet but will have one soon.
@justinu68922 жыл бұрын
Your oil rag choice looks familiar. 😂
@jasonsmithesq.3994 Жыл бұрын
Great video...I have the same engine. Do you have one checking the impeller?
@walrusadventures3441
Жыл бұрын
Dangar marine
@tonyreeves72108 ай бұрын
May I suggest to improve the full draining of all contaminants, ease of removal of filter, run the engine to operational temperature on the flushing muffs. Also for the sake of the bearings and pump, please fill the oil filter with oil prior to fitment, so the paper element is soaked. You fill when you start to do the draining process, the oil soaks into element and there is barely any to spill when fitting. Starting on a dry filter creates a situation whereby oil pressure takes a while to build and bearing surfaces can get damaged.
@juancarlos-np2hq3 жыл бұрын
Genial. Tu. Video. Amigo
@brianabelaye9095
2 жыл бұрын
👍🏽… was very helpful… what else maintenance or repairs did you do to your Yamaha 115 hp?….I have one too….thanks again….
@robertsonfamilyadventures7082
Жыл бұрын
I only do the oil changes, spark plugs, gear oil, fuel filters, and everything else goes to the mechanic. Good luck with your project.
@thaicarpenter3 жыл бұрын
How much 115hp in your county?
@robertsonfamilyadventures7082
3 жыл бұрын
Motor usually runs about $12000 from the dealership.
@thaicarpenter
3 жыл бұрын
@@robertsonfamilyadventures7082 thanks for your answer
@Nass19862 жыл бұрын
Hi Robert are you facing any problem in your motor lately, im planing to get 1 from the dealer in my country do u Suggest such a motor thanks ?
@robertsonfamilyadventures7082
Жыл бұрын
They are amazing motors. Good luck with your purchase
@SureFoundation777 Жыл бұрын
Is this the same as winterizing? Does this engine need to be fogged? I have the same motor
@robertsonfamilyadventures7082
Жыл бұрын
I live and Florida and never had to winterize my motor. Sorry I couldn’t help.
@SureFoundation777
Жыл бұрын
@@robertsonfamilyadventures7082 No problem , great video
@kensummerlin1802 жыл бұрын
Nice goggles
@alancurrie91082 жыл бұрын
"hand tight" *proceeds to tighten with ratchet*
@robertsonfamilyadventures7082
2 жыл бұрын
Thanks for watching!
@daveholte76582 жыл бұрын
Always a mess. No matter which way you do it My Mercury’s are much easier and better designed But those Yamaha’s run and run with no issues
Пікірлер: 35
Thank you for the video. Just bought a Yamaha 115. Another favorite channel is Dr. Shawn Baker. He will set you straight.
just what I was looking for as I have the same exact outboard! much appreciated!!!
Great video. Thanks for the part numbers.
thanks, hope its a easy as you made it look.
I just did mine.. 2001 115 Always a big mess PITA. Terrible design! BUT, it’s done LOLOL My thermostat was bad too. Your son is awesome helper!! All the best from NJ!
Thanks, really helpful!
Excellent video; super helpful! my first outboard turns out to be the same exact engine. Thank you so much Wish you had some more on outdrive oil change and diagnostic software integration. 😉
Thanks bud , I could not even find the drain plug.
Good help!
u the man
TIP FOR REMOVING ANY OIL FILTER: Run the engine to normal operating temp. Oil filters will be MUCH easier to remove.
What about the other seals?
If you trim it all the way up, makes less of a mess
Than k you for your comment about the environment! Great job. What’s your son’s name?
Very informative. Do you have one on replacing your water pump or impeller?
@robertsonfamilyadventures7082
2 жыл бұрын
Not yet but will have one soon.
Your oil rag choice looks familiar. 😂
Great video...I have the same engine. Do you have one checking the impeller?
@walrusadventures3441
Жыл бұрын
Dangar marine
May I suggest to improve the full draining of all contaminants, ease of removal of filter, run the engine to operational temperature on the flushing muffs. Also for the sake of the bearings and pump, please fill the oil filter with oil prior to fitment, so the paper element is soaked. You fill when you start to do the draining process, the oil soaks into element and there is barely any to spill when fitting. Starting on a dry filter creates a situation whereby oil pressure takes a while to build and bearing surfaces can get damaged.
Genial. Tu. Video. Amigo
@brianabelaye9095
2 жыл бұрын
👍🏽… was very helpful… what else maintenance or repairs did you do to your Yamaha 115 hp?….I have one too….thanks again….
@robertsonfamilyadventures7082
Жыл бұрын
I only do the oil changes, spark plugs, gear oil, fuel filters, and everything else goes to the mechanic. Good luck with your project.
How much 115hp in your county?
@robertsonfamilyadventures7082
3 жыл бұрын
Motor usually runs about $12000 from the dealership.
@thaicarpenter
3 жыл бұрын
@@robertsonfamilyadventures7082 thanks for your answer
Hi Robert are you facing any problem in your motor lately, im planing to get 1 from the dealer in my country do u Suggest such a motor thanks ?
@robertsonfamilyadventures7082
Жыл бұрын
They are amazing motors. Good luck with your purchase
Is this the same as winterizing? Does this engine need to be fogged? I have the same motor
@robertsonfamilyadventures7082
Жыл бұрын
I live and Florida and never had to winterize my motor. Sorry I couldn’t help.
@SureFoundation777
Жыл бұрын
@@robertsonfamilyadventures7082 No problem , great video
Nice goggles
"hand tight" *proceeds to tighten with ratchet*
@robertsonfamilyadventures7082
2 жыл бұрын
Thanks for watching!
Always a mess. No matter which way you do it My Mercury’s are much easier and better designed But those Yamaha’s run and run with no issues