Yakima OverHaul HD Truck Rack Installation
Спорт
For weekend adventures and hardworking weekdays, the Overhaul HD adjustable truck rack offers best-in-class payload and unmatched versatility. Leveraging our new HD Bars for a 500-lb. on-road carrying capacity, and paired with Yakima’s 300-lb. Off-Road Rating, the OverHaul HD truck rack is the ideal foundation for heavy loads. The crossbar height can be adjusted to suit your needs: way up, for long loads to go over the cab-or down low, to get the rack out of the wind. The uprights are easy to take on and off in minutes, so the truck’s only racked-up when needed. The OverHaul HD truck rack uses any of our HD Crossbar sizes, and accepts our SideBars™ for attaching off-road and utility accessories. Multiple tie-down points and the ability to fit most truck beds-including select tonneau covers-make this an ultra-functional rack that works and plays as hard as you do.
Learn more here: www.yakima.com/overhaul-hd
Bed Track Kit 1 Installation Video: • Yakima Bed Track Kit 1...
Tonneau Kit 1 Installation Video: • Yakima Tonneau Kit 1 I...
Пікірлер: 20
Why do you advertise this as a rack when it is really just towers for a rack system?
How the security works on the crossbars? only are screws? or can I add a lock too?
Where can I find this particular SKS locks for this overhaul rack system that you using here?? I’ve looked everywhere for this SKS locks.
Can we get a PDF of the installation manual on the Yakima site, or put the necessary torque values in the description? Thanks.
Does anyone know the max extendable height of the towers? I’m hoping to carry my 16 ft prospector canoe and am curious if there is enough height OR if I’ll need a cross bar on top of my cab? Anyone??
The instructions that came with mine said to put the front locking base on the driver's side and the rear locking base on the passenger side. Does it matter?
I have this system with aRetrax Tonneau cover and a Tepui RTT...I plan to install the RhinoRack Batwing on the HD rails. Video helped to find the 4mm nut to remove the end cap. It looks like the attachment bracket will slide into the channel except I don’t believe the end cap can be replaced... if it was returned the bracket has a 1/4 -1/2 inch clearance between bracket and rail. Any thoughts?
@diegodto
9 ай бұрын
I'm curious to learn how the rack will be installed after my Retrax cover arrives
Crossbars not included??
Does Yakima make any kind of insert to fill the space in the mounting pads when the racks are removed? Would give a cleaner look and also make a nice little pad for setting stuff. 🤷🏼♂️
@kk-pz8gn
6 күн бұрын
friends 3d printer maybe?
How does this rack Yakima OverHaul HD - Yakima Trunk & Bed Rack work with the sliding rail system in the bed of the new Tacoma?
@YakimaRacksOfficial
4 жыл бұрын
Hey Davis, We haven't evaluated the 2021 Tacomas yet. On 2016-2020 Tacomas you would need the Bed Track Kit 1 (SKU: 8001168) to use the OverHaul. Once we have an approved fit it will show up on our fit guide on yakimatech.com.
Do you need to measure torque on these? Not shown in the video but in the install instructions it says to tor to specific torques. Is that necessary or just make sure they are tight?
@daltonkforsythe
2 жыл бұрын
What did you figure out? I don't want mine to fly off 😂
yep
Howdy...are you aware of successful installation on the 2017 Honda Ridgeline (2nd Gen body style)? Thanks!
@YakimaRacksOfficial
5 жыл бұрын
Hi Brian, Unfortunately the Overhaul will not fit on the Honda RidgeLine
@elr6697
Жыл бұрын
@@YakimaRacksOfficial Actually, I've installed them on the Gen 1 Ridgeline and with a small modification to the clamp, it works great. I'm not sure why Yakima couldn't figure it out.
At 2:28 they literally say to put the locking base on the driver's side, then they do the exact opposite. What a stupid video.