xTool S1 Laser Review - The Best Laser for Beginners?
Тәжірибелік нұсқаулар және стиль
Here is my formal review of the xTool S1 20W fully enclosed laser engraver and laser cutter. After about a month of use, I have put this laser through the paces as an absolutely beginner. There's plenty to like about this laser, but also a few shortcomings. Will it find a permanent spot in my shop?
LINKS TO PURCHASE XTOOL S1:
US Store: www.xtool.com/products/xtool-...
CA Store: xtool.pxf.io/0Za02N
EU Store: www.xtool.eu/products/xtool-s...
UK Store: uk.xtool.com/products/xtool-s...
DE Store: de.xtool.com/products/xtool-s...
Trade in your old laser/vinyl cutter for a new xTool machine and save up to $500! - No return required! Click on one of the links below and look for the Trade In link at the bottom of the page.
AMAZON LINKS (INCLUDES PAID LINKS):
🇺🇸 Prang Tempra Paint - amzn.to/3wMQGJp
🇺🇸 Brilliance Laser Ink - amzn.to/4bOxedY
🇨🇦 Prang Tempra Paint - amzn.to/4aDC7Wr
🇨🇦 Brilliance Laser Ink - amzn.to/3QWxgIY
CHAPTERS:
0:00 Introduction
3:19 What comes with the xTool S1 basic kit
6:26 Touring the xTool S1 laser
8:47 Innovative pin-pointing system
13:14 Examples of projects I've made
18:57 Pros the xTool S1
25:08 Cons of the xTool S1
31:15 Final thoughts on the xTool S1
RELATED VIDEOS:
- xTool S1 Unboxing & First Impressions: • Best Beginner Laser En...
- Creality Falcon2 Pro Review: • Creality Falcon2 Pro R...
Please note that the xTool S1 20W Basic Kit was provided free of charge by xTool. Affiliate links to purchase products from xTool and Amazon are provided and I may receive commissions for purchases made through those links. The views expressed in the video are my own and I was not compensated to give positive sentiments.
#xtools1#lasercutter #laserengraver
Пікірлер: 14
Great video, thank you. If you want an inexpensive inline fan try a 'duct booster'. Lowes, HomeDepot, etc., has them. They make various sizes to fit your duct. I use one for venting weld fumes out of my shed.
@MasonWoodshop
13 күн бұрын
Great tip, thank you!
Very cool machine! Thanks for sharing.
@MasonWoodshop
2 ай бұрын
Thanks for watching! I love your content.
There is a setting in the software to change how long the exhaust fan runs after you finish processing.
@MasonWoodshop
Ай бұрын
Thank you!!! Just found it under “working info”.
Thanks for sharing. This is wonderful information. I am considering getting the S1 but was leaning more towards the 40W because I want to cut thicker wood. I keep seeing what the lasers will do in one pass. Will they cut thicker materials in more passes? Would the 20W cut up to 3/4" if it made more passes?
@MasonWoodshop
Ай бұрын
Thanks for watching! The 20W could do it in multiple passes, but I have found that the cut isn’t quite as precise (maybe more burning). I have recently been playing around with the 2W IR laser and after doing so I think I’d recommend the 40W + 2W kit to have the most versatility.
@jodiemeschke6889
Ай бұрын
Thank you so much. I think that is what I need as well.
If you wanted to cut 12mm ply with the 20w laser, would it just be a case of 2 passes of the laser?
@MasonWoodshop
16 күн бұрын
I tested that a while back and I believe it took me 3 or 4 passes. The end result was pretty good, but if I was cutting 12mm regularly, I’d recommend taking a look at the 40W version.