Thank you for your videos, I have 2 of these XPC Moving head Gobo Lights connected to my DMX Controller for more flexible control and I will get 2 more.

Thanks. Just got these. Will be here in a few days

Thanks for this video. My old gobo lights are dying. But I have this same setup going for a wedding on the 26th. I might try to pick these up and program in time

I just brought my two and loving it. Nice video on this product.

@TheNathan343

3 жыл бұрын

Thank you

I live in a realtivly small town and am working on a light show this year for halloween just ordered some similar lights (they are coming tomorrow,) and I cant wait to see them if they are at all like these!

thanks for these videos! I just started getting into light production as a side hobby and coincidentally I watched your videos to purchase the u king spyder and xpc moving head! It was so funny when I realized that both videos were from the same person :) really excited to see what other videos you produce in the future once your setup continues to evolve

@TheNathan343

3 жыл бұрын

Well thank you for those kind words that means a lot I am going to be posting more videos on more lights that I am going to be getting in the future There's a lot more coming there is a new video on the trust set up hopefully to be out later tonight with cable management talk . Be sure to check that 1 out

@VuNguyen-ko6qy

3 жыл бұрын

@@TheNathan343 definitely looking forward to it! What is the other light that you have in this video? the 7 light moving head? Also another video topic to talk about could be light control or what software you using to create presents and banks :)

@TheNathan343

3 жыл бұрын

@@VuNguyen-ko6qy Go thank you that is a great idea for a video and I will be sure to throw that in in the next video or 2 that I have up which should be up sometime tonight or tomorrow I really appreciate your input I am always thinking of different ideas or topics to talk about

Sending my suport watching her in Philippines thanks for sharing this video

almost paid triple for the amount these bad boys cost here W review

I just bought some yesterday

👍

Any chance you might have a link to the manual that came in the box?

Thanks for your video. Very helpful. I have a couple of these lights - probably different brand. I want to mount them in my cabin to the ceiling. It's an open ceiling so it's slanted like the roof. Do you think there would be any issues with these lights mounted at an angle? Do you think being at an angle would harm the light or the motor in way?

@TheNathan343

3 жыл бұрын

No they should be ok I've seen moving head lights mounted at an angle

If my spotlight doesn’t turn off during the reset, what could actually be the problem? I changed the motherboard but still have the problem 🙈

Have u tried using them outside? If so are they nice for outdoors?

You Did NOT Specified If There ROTATING GOBOS OR INERCHABLE GOBOS IN Your Video Thank You Keep Up The Good Work Your going...

@jesseviewmont8343

Жыл бұрын

WATCH the video@ 9:32

Hey man how would I only keep them on the dance floor (limit rotation) with a DMX controller? Thanks in advance

does anyone know how to do slow moving pans or tilts while in dmx mode?

How do you get them to stay on white spot?

Compre dos de estas pero una no trabaja que sera??

Can you do a quick tutorial on how to program these lights? I guess the manufacturer assumes people know how to program them. They did not come with instructions, only the spec book you have.

@TheNathan343

2 жыл бұрын

What are you wanting to program like master slave ?

@dhannegan

2 жыл бұрын

@@TheNathan343 yes.. using the XLR out of one unit to the input of the other. They are sitting on 6 ft tall shelves against a wall. I'm trying to get them to circulate out from the wall into the room. (Limit rotation) Is it possible to do that?

@TheNathan343

2 жыл бұрын

@@dhannegan You're going to need Adm X controller software that will allow you to do that or you're going to have to get moving heads that have totem mode do not allow them to rotate to the back those don't have that program to do that if u don't want them to go to the back and stay in front u will need a dmx controller or something like adj dmx wifly bridge

@dhannegan

2 жыл бұрын

@@TheNathan343 I just need to know how to work them as they are I suppose. Again, no instructions and Chinese customer service. All of the commands are abbreviated on the units and nowhere does it yell you what button does what. Oh well, I guess I'll figure it out eventually.

@stevenmiller4561

5 ай бұрын

Is there a way to keep these on the same pattern without it changing and staying on one color?

Hi can I please know for how much did u buy those because Amazon says currently unavailable so I wanna know the price so that I can buy from a different place pls just tell me the number of the price and thanks so much for this video man I really appreciate this nice review about my favorite moving head lights

How do you dmx them ? Do you put them on the same channel then plug the dmx cord?

@ryanguerrero3329

3 жыл бұрын

I don’t have/ see the slave master option

Next time review them at night

When u daisy chain these 2 moving head lights do u need use terminator?

@TheNathan343

3 жыл бұрын

No not unless u have like 8 or more in a daisy chained together

@carlogarcia209

3 жыл бұрын

@@TheNathan343 oh okay thanks, Yeah I hear lot people say yes u need it some people say no I’m just like ugh lol.

Mine only have a “Auto” “SL 1” “SL 2” I can’t find the master function or “nast” Please help

@TheNathan343

3 жыл бұрын

Its there just have to choose the up or down on one of the settings and u will find it

@ryanguerrero3329

3 жыл бұрын

Yea mine doesn’t have nast or master either

Can you run the lights sycnhronously without dmx?

@TheNathan343

3 жыл бұрын

No for them to talk back and forth u have to use dmx

You skipped how to set the sound mode and the display. Can you show what steps you took? I received mine 2 days ago. 1- I believe they have an LCD display issue. My sensitivity mode looks like S9ns - def not an E. I have turned on sound mode and adjusted the sensitivity but it either spins very fast on its own or very slow. I def do not have the same results as you, or I am just a dumb arse. By the way , thank you for the videos, gives me hope. These things didn't even come with a cable so the only way to test is in sound mode which right now is not going very well. It is right next to my speaker.

@TheNathan343

3 жыл бұрын

Yea I can make a updated video on.theae I just got a new moving gobo light u can find it on my channel and I will explain how to do.the sound active in the next video I do have more dj light stuff I will be doing reviews on in the next few months just waiting to receive the product

@dibblejr

3 жыл бұрын

@@TheNathan343 I did manage to figure them out with help from a friend that has a similar pair. However I bet a lot of other people may find a better video of the menu screen and explanation very helpful. Over all your video got me started in the right direction and is much appreciated.

@TheNathan343

3 жыл бұрын

@@dibblejr Yeah I should have did a little better job on the menu from further on videos I will do a better job on explaining how to set things up I will be doing a live stream tomorrow explaining how to set up some of the lighting and talking about the truss that I have and a few other things

do you know if it works with sound switch software?

@TheNathan343

Жыл бұрын

I do not im.sorry

Which would be better the 60w or 90w?

@TheNathan343

3 жыл бұрын

60

@carlogarcia209

3 жыл бұрын

@@TheNathan343 Ok thanks, Have u tried the 90w?

@TheNathan343

3 жыл бұрын

@@carlogarcia209 no I haven't are they nice

How do you turn off the strobe?

@TheNathan343

Жыл бұрын

With a dmx controller if your using the auto programs u can't

You don't seem to have any style man.