Xiaomi Redmi 9 Screen and Frame Replacement
Ғылым және технология
in this video im doing a screen swap on a Xiaomi Redmi 9
here is where i brought the part
s.click.aliexpress.com/e/_AEZp82
================================================
================================================
Tools that i use frequently that are Ali-express Affiliate linked
CPB Heat pad: s.click.aliexpress.com/e/_dUS...
This is the Blue Pad i always have on my videos usually set at 60 Oc
I use this to soften adhesive on mobile devices.
B7000 Frame Adhesvie: s.click.aliexpress.com/e/_d62...
my go to glue for almost everything now days!
Thin Metal Pry Tool: s.click.aliexpress.com/e/_dTz...
Used to open ipad and remove glued back covers on phones
Heat Resistant Tape: s.click.aliexpress.com/e/dQ283f6
When using the heat gun near sensitive parts, its best to cover them
With this to protect them
Double Sided Black Tape: s.click.aliexpress.com/e/bO46kXwg
The usual tape i use on most repairs, on screens
Red Clear Tape: s.click.aliexpress.com/e/cK4DNmIU
For things that need more Stick!,usually on tablet digitizers
Phone Repair Tool Kit: s.click.aliexpress.com/e/bH1lqUe4
A Similar tool kit to mine, that i use for those random screws that you dont normally see
Hakko FX 951 Clone Station: s.click.aliexpress.com/e/b5YamiMs
My Soldering Station i use, so far it has been good
Quick 861DW Hot Air Station: s.click.aliexpress.com/e/bAdNJvNI
This was a purchase to learn a bit more in micro soldering
So far it has been a great purchase
Power Z USB Amp Tester: s.click.aliexpress.com/e/_Bf7...
Advanced readouts of power draw on devices
Basic USB Amp Tester: s.click.aliexpress.com/e/_dWF...
A Simple Amp tester to see if your charger is actually putting out power
Black Tweezers Set: s.click.aliexpress.com/e/_dU2...
The Black Tweezers i use in my videos
Large Metal Pry Tool: s.click.aliexpress.com/e/ckqD1TNQ
This is the same as the metal pry tool i use, different brand printed on it
Pry Tool: s.click.aliexpress.com/e/y0dvtNW
A New Version of the pry tools
Basic Digital Microscope: s.click.aliexpress.com/e/_dXD...
This is the kit i purchased to do micro soldering, if you see a video
of me micro soldering it was captured on this cameras feed
Orico 120w 10 Port Charging Station: s.click.aliexpress.com/e/miqk2Le
The Charging station i use out the back, usually having multiple devices connected
Doesn't support Fast charging but still does a good job
One page i go to when I'm curious what new repair tools are out is:
Wozniak Store: s.click.aliexpress.com/e/9eDP9uy
Пікірлер: 41
Thank you very much for this! Just finished swapping my son's redmi 9's screen, I just had a little trouble putting the motherboard back in. It seems like you gotta put the left side first, either way it won't fit right. Another note: I managed to get the battery out by just streching the tape behind it, yout got to pull it upwards, it comes all off pretty smooth, no alcohol needed. Thanks again :)
@rickstechrepairs
2 жыл бұрын
Your welcome good tip about the mainboard, and well done with the battery tape, once they get a bit old they get really hard to remove
Thank you. I have just finished to swap my daughter's redmi 9 screen following your instructions. I have replaced the battery too because after 4 years removing the old one without damaging it seems to hard to me, and 4 years is a good period of time for changing it.
@rickstechrepairs
Жыл бұрын
great to read this has helped you :) A 4 year old battery is certainly a tired battery
Thank you bro very helpful
@rickstechrepairs
2 жыл бұрын
your welcome
It works, thank you very much!
@rickstechrepairs
5 ай бұрын
cheers
❤♥👋You are the teacher of a generation, my friend
@rickstechrepairs
Жыл бұрын
thats too kind of a thing to say, im simply a repair man uploading videos :)
@mohamedhomes2934
Жыл бұрын
@@rickstechrepairs You are a very respectable man🌹👋👋❤
Thanks for the video, i was lucky to remove the batterystripes , we have the same system for pictureframes, so it helps to pull flat and slowly with time. When thebattery lifts a bit, put something under and after the stripe pulls longer and longer..at least out
@rickstechrepairs
Жыл бұрын
Cheers
Very usefull video, thank you!!!!!
@rickstechrepairs
8 күн бұрын
cheers
Thank you!
@rickstechrepairs
2 ай бұрын
your welcome
THANKYOUA LOT!!!!!!!!!!!!!!!
@rickstechrepairs
Жыл бұрын
Your welcome
I tried to remove the battery with a metal crowbar, it was stuck too much, the edge of the battery bent a bit. It is dangerous?
I have a question....what if u dont heat up any of the parts u supposed to also can u use a hair dryer for heating up ??
@rickstechrepairs
Жыл бұрын
a hair dryer should work
what phillips/cross screwdriver size did you use? 0.8? 1.5? 2.0? or other size please answer thank you
@rickstechrepairs
2 жыл бұрын
i use a 000 screw
@HAEJIxxi
2 жыл бұрын
@@rickstechrepairs thank you ❤️
Hello, can you tell me the dimension of the double face tape you use at 6:31 ?
@rickstechrepairs
Жыл бұрын
Not sure sorry
♥🌹
@rickstechrepairs
Жыл бұрын
Cheers
What is the name of golden cheap look like on the upper part of the screen that you remove
@rickstechrepairs
6 күн бұрын
4:36 where the tweezers are currently pushed on ?
@nwarsvlog6865
3 күн бұрын
Yeah
My son threw his phone. When i inspect the damage its the ribbon from lcd and ribbon from the battery. Can i change ribbon in lcd or do i have to change the whole screen.
@rickstechrepairs
2 жыл бұрын
if the ribbon cable is damaged, a whole screen would need to be swapped
@admiralhel3330
2 жыл бұрын
@@rickstechrepairs thanks 🙏 gonna follow your video step by step
termo paste is oblygatory?
@rickstechrepairs
Жыл бұрын
i find if it has it on there from the factory cant hurt to make the new part the same
I already replaced the lcd but some part didn't touch
@rickstechrepairs
Жыл бұрын
sounds like a faulty new part
@Freen08bec05
Жыл бұрын
@@rickstechrepairs can you help me?? What should i do?