I want to thank you as well! Interesting how many people got the same problem. Bonus tip: The pressure with hands on the flex cable worked for me only for two days. And when I tried your tips nothing happened. I almost bought a new sub board and then I cleaned both connectors on this flex cable you mentioned with alcohol and a toothbrush and then the pressure worked again. The connection is really poor, the upper part of this flex cable (closer to camera) causes that the power button doesn't work. So when you remove the plastic in the upper part this button won't work for you. Pressure on both sides of this cable needed!

I had issues charging that appeared the day after upgrading to miui 14. Was kind of thinking about planned obsolescence and I stumbled upon this video that made me realize what was the issue. Thank you so much. I love this phone.

Thank you for this video !!! All I needed to do was to put pressure on that 1 spot, you saved me money and time.

@ll3yWanTeD

Жыл бұрын

Good. Same helped me here!!👌🏼💯

@rohi1255

Жыл бұрын

Did you find that successful for how many days?

@MrKinsenas

Жыл бұрын

god dammit I did this and it worked thank you so much!

@Maros554

Жыл бұрын

@@rohi1255 A week until I decided to open my phone and put a piece of electrical tape on top of the connectors. Works just fine since.

@Membodu26

Жыл бұрын

Thanks you !!! That was that for me too, just needed to press that point, you're a boss !

It worked for me too with 4 layers of insulating type cut to size. Yay! After repair, the battery on my son's phone had been run flat so I slow charged it up to 15% with a battery pack and then plugged the official charger in and it turbo charged up to 100% in about an hour. Fortunately I'd repaired my daughter's Honor 9 Lite a few times (screen replacements) so I had all the parts I needed including the T7000 glue. Thank you so much for this video.

@mstphone

Жыл бұрын

That's great , my pleasure

@tvsathdToutlesdemo

Жыл бұрын

I have the same problem, how do I do fast charging?

Thank you for sharing this video. I have the same problem and like you, I put pressure on every corner and then the charging works. I guess is because I dropped it a couple times and something inside must have gone loose. Lol. Thanks buddy, you save my phone with this video. God bless!

@mstphone

Жыл бұрын

My pleasure God bless you

hey thanks for uploading this video! It really solved my problem, spent hundreds by repairing but none of the shop could detect the problem. Thanks a bunch!

@mstphone

Жыл бұрын

My pleasure

Just saved my phone myself after three tech shops denied looking into this phone. Thank you MST!

@mstphone

Жыл бұрын

Anytime

@artdogg50

Жыл бұрын

Every technician I took it to was clueless on what to do. A waste of my money.

Fixed it. The lower (USB) board didn't make contact with the connector. I used some 1-2mm rubber with adhesive on it. Before: clean the connectors with isopropyl alcohol and compressed air. Using AccuBattery measure over 5A of current at charging. L.E.: The phone still works as new! It passes about a year now, and it's still strong. Turbocharge works nice.

Thank you! It works for me too. I peeled off the shell with a small microwaveable pillow heater.

I have a very good tip for everyone with the same problem. I had the same problem, I guess the ribbon cable wasn't connected well. Instead of going through this whole process, I tried putting the phone glass side down on a table and start pushing on the back thoroughly and with a lot of force. The back is flexible and I guess I also applied pressure on the ribbon cable connectors through the back of the phone. When I tried charging again, it worked like a charm! The whole process took 10 seconds! At the same time, I could not have thought about trying this without this video as it revealed the possible issue and location of the ribbon cable, so a big thanks to MST!

@mstphone

7 ай бұрын

Thank you for your words and for sharing with others. God bless you

@Piotr_Majchrzak

7 ай бұрын

Is your fix became permanent?

@mstphone

7 ай бұрын

@@Piotr_Majchrzak no

Thank you for sharing the info! I got the same problem. :( And it came in the worst time as it was the case with others. :/

You are the best !!! Before 1 week i had the same problem with my Poco f2 Pro. When I asked the technical from MI service store about the fixed cost, he told me: "...the cost for repair the charging problem it is €50". I followed the instruction from your video and I repair my phone in a half hour and without cost 😃😃😃 Thank you man.

@mstphone

2 жыл бұрын

Anytime bro

@ll3yWanTeD

Жыл бұрын

Nice work, man! 👍🏼

Thank you for this' i was looking at vids to see why my phone was not charging. Then i tried what you said at start of video. I put presure on certain spots on the phone and it started charging i was litrally looking at new phones as well you just saved me £600+ thanks dude

@mstphone

Жыл бұрын

My pleasure

@ll3yWanTeD

Жыл бұрын

You could help him donating something. Hust saying.

@gutsblackswordsman3986

Жыл бұрын

@@ll3yWanTeD ​ Only worked for a couple of days phone died just saying...Also i am barly able to put food on the table at the moment price hacks in the uk are fucking crazy but if you got money to spare go ahead and donate......just saying

Thank you so much 🥰 Just finished from my phone disconnected the cable and reconnected it and now charging works great.

@mstphone

Жыл бұрын

My pleasure

tq so much for your video bro... now my phone already can charging like usually.. may god bless you...

@mstphone

Жыл бұрын

Very appreciated God bless you

Have to say thank you, my phone had exactly same problem, now fixed.

@mstphone

2 жыл бұрын

My pleasure

Thank you very much!!!! It solved the problem for me. It was a very simple fix with the added pressure to the flex cable. Let's see if it fails in the future, but for now is very reassuring that the charging problem had a very simple explanation. Really liked your method on figuring that out. By the way, the adhesive on mine was a bit excessive and that made me doubt if it were to work out in the end, I had to apply heat for a good 5 mins in the entire edges of the phone until the cover was able to break apart with a bit of force.

@mstphone

3 ай бұрын

My pleasure

hi! my phone have the same problem 2days ago then i saw this vid and tried to press the lower part of the phone and it works! seems like it is really the same problem as yours thanks a lot i have now the details of the problem

@mstphone

2 жыл бұрын

Anytime bro

Tq so much.. my poco f2 pro "dead" almost 1 & 1/2 year. today.. i almost throw it away. for the last hope, i try to check online solution untill i saw your video tutorial. turn out, i have same problem with that unit. i apply pressure to that connector, and my phone charging. 🥰 now its work again & i decide to give it to my father. tq so much for ur tutorial. 🙏🏼

@mstphone

Жыл бұрын

My pleasure

used this to figure out how to get it charging again, pressing in bottom fixes it ... i'm sure it wont last, but at least i have a fully charged phone for another day Edit: Did the full fix with layers of electrical tape and it's been working fine for a few weeks now

@martalialiem2095

Жыл бұрын

Update?

@twigahappy

Жыл бұрын

@@martalialiem2095 still working! Seems to have sorted it for good

@angellee9999

Жыл бұрын

Hey, my phone also have this problem, im currently finding for metal and tape for the board step, how did you do the step?

@twigahappy

Жыл бұрын

@@angellee9999 I justed used about 5 layers of electrical tape, nothing else

@artdogg50

Жыл бұрын

Wow my Poco F2 Pro has been dead for about 2 years now. I pushed in the place where he said and suddenly I got some lights. Wish I'd known about this when he did this. I could have shown it to the expert technician who was clueless on how to fix it. Not sure I'll continue to try to fix it since it's been so long. I am tempted though because I still kind of miss it. Pretty sad Poco couldn't figure out how to fix there own freaking phones though.

this worked, now waitng 2 months for the back cover tape. all my friends are just laughing at the mod :D but it works beautifully

@ll3yWanTeD

Жыл бұрын

Good brah

my poco f2 pro had the same problem and just done this. i think it works ! great ! thanks.

@mstphone

11 ай бұрын

My pleasure

Yoo make my day ! It so funny that first time I encounter this kinda problem , Thanks!

@mstphone

Жыл бұрын

My pleasure

Thanks. This really saved me - although my phone now only charges to 87% and I'm not sure why but it won't go above that. Poor design from Xiaomi considering how common this problem appears to be from the comments.

@mstphone

11 ай бұрын

My pleasure

Love you bro, my phone have the same prob, i just have press on screen and backside, and now my phone charge again 👍

@mstphone

Жыл бұрын

That's nice bro Anytime

Thank you, the same problem! You saved me hero

@mstphone

Жыл бұрын

My pleasure

Dude you save my day and my money, I LOVE U MATE ♥

@mstphone

Жыл бұрын

My pleasure

Thank you so much for this video!! It worked for me 🤗

@mstphone

2 жыл бұрын

Anytime

Thank you, long video but it helped me to charge it, I used a clamp and it works👍🏻👍🏻👍🏻

@mstphone

10 ай бұрын

My pleasure

works fine the solution, i pressure the metal pad with a piece of simcard... then works perfect the fast charge.

Thank you!! This is such a helpful information 😢 my phone is not charging right now because of the same situation

@mstphone

8 ай бұрын

My pleasure

On my phone was same situation, that trick was help to me, thanks my friend 😂

@mstphone

Жыл бұрын

Anytime bro

i have the same problem, i don't understand how the connection is not good one day ... But it works fine, thank you !

@mstphone

Жыл бұрын

My pleasure

thanks mate this was very helpful 👍👍

@mstphone

Жыл бұрын

Anytime bro

Worked like a charm! Thanks a lot. Now my Poco is charging again without any problems. Saved me a lot of money. Still a good daily phone!

@mstphone

Жыл бұрын

My pleasure

Thank you so much! U save me a couple bucks and it was very funny to do it.

@mstphone

2 жыл бұрын

That's Good Anytime

@ll3yWanTeD

Жыл бұрын

Ok but stilk u could help him with a few donation

Thank u very much for the video! I have applied the same solution and it's working well

@ll3yWanTeD

Жыл бұрын

Ok did you do it by yourself? With all the items he used?

@noraifuru

Жыл бұрын

@@ll3yWanTeD Yeah bro, first I checked that after pressing the phone was charging. I had to improvise a little with the metal piece lol

So after 19 months my Poco started having the same problem - I followed this instruction - 3 layers of tape - and it worked - thank you so much!

@mstphone

2 жыл бұрын

Anytime dear

@monopal2330

2 жыл бұрын

The same thing happened to me exactly 19 months of using the phone

@dratini480

Жыл бұрын

for me after 21 months. but it is fixed now with some electric tape :D

@_antares_

Жыл бұрын

Wtf 21 months for me too 🤯

@ll3yWanTeD

Жыл бұрын

Same here lol almost 2 years

Thank you. It works on my phone

you saved my life. thank you so much

@mstphone

2 ай бұрын

My pleasure

Mine waited 4 years to do this bad thing to me, even though it was well used, a lot of falls, including two broken rear windows. In short, I put 4 small pieces of Schaterton tape between the plastic part of the speaker and the connection of the cable to support it, my device was able to charge again easily I knew there was a known charging problem but I was never interested since I didn't have a problem, I thought it would be necessary to change parts or resolder something, but no it was easy and free ☺️

did this today, really helped!!! thx man

@mstphone

Жыл бұрын

Anytime man

@ll3yWanTeD

Жыл бұрын

Ok bro but still u could donate him few buckz

thank you, you helped me, good job 👍

@mstphone

11 ай бұрын

Anytime

Thx dear friend. It works like a charm

@mstphone

3 ай бұрын

My pleasure

Thank you. It worked

@mstphone

Жыл бұрын

Anytime

You save my phone (money too)

@mstphone

2 жыл бұрын

My pleasure

@ll3yWanTeD

Жыл бұрын

Lol good now wheres the paypal transfer for him?

Save my money thanks dude 🙏🏼

@mstphone

Жыл бұрын

Anytime bro

This worked for me too, thanks mate

@mstphone

Жыл бұрын

Anytime bro

This happened to me today. I was worried that the usb port was damaged when I watched your video, I did what you said at the start, i put pressure on the phone and it charged. Thank you so much for the video

@mstphone

Жыл бұрын

My pleasure

@ll3yWanTeD

Жыл бұрын

Good job! Same happened me here.👌🏼💯🔝👍🏼

Thank you sir you saved my day

@mstphone

Жыл бұрын

Anytime

Very usefull i had same problem

@mstphone

2 жыл бұрын

Thanks

I placed a porous material, which is little spongy with the exact same way and it's still working fine after few days.

Thank you so much!!! God bless you!

@mstphone

11 ай бұрын

My pleasure God bless you too

when i met tjis problem i change charging port plate plus battery from aliexpress . i wery like this phone for his front camera :) i hope he will live long after repair at moment all is ok

Thanks bro u helped me :)

@mstphone

Жыл бұрын

Anytime bro

I fixed it like you showed and it works for me as well, so thank you! The only problem is that it now charges very slowly on a normal charger (a full night gives me ~50% charge at 5W) and it gets very hot on a fast charger, do you have an idea what it could be?

@mstphone

2 жыл бұрын

You can replace both sub board and flex cable

note good idea bro after a while problem is back jumper is the best sulotion

@mstphone

2 жыл бұрын

Yes sure, the problem happened again.

Thanks, it worked for me too

@mstphone

Жыл бұрын

Anytime

I go to the mall they just charge it and never explain and I forgot to test If charging but its late to watch this but still thanks I'm not going back they just want money their not honest.i checked it myself and its right their lose contact at that same spot after I touched then it works.I'm very thankfull this phone is going three years to me I'm glad I saved money from buying another phone.

@mstphone

Жыл бұрын

Yea not all people honest, im happy that you managed to fix it.

Followed the steps and it works! Thanks for making this video.

@mstphone

2 жыл бұрын

Anytime bro

Thank you very much

@mstphone

Жыл бұрын

Anytime

Thank you very much!

@mstphone

Жыл бұрын

Anytime bro

Worked, thanks

@mstphone

2 жыл бұрын

My pleasure

I thank you thausand times. You helped me so much. It only was a loose cable. you are my hero 😁

@mstphone

2 жыл бұрын

Very appreciated bro

Thank's for your video after 26 month with my f2 pro i was thinking about buying a new one, now is charging again. But now i don't know why the vibrator make a very loud sound like a Cicada.

@mstphone

Жыл бұрын

You may forget to put some screws if you open it .

@batouw

Жыл бұрын

@@mstphone nope every hole has his screw I check few times. I really don't understand even if i Push on the vibrator and activate it, it make very loud sound..

@mstphone

Жыл бұрын

If this so, then the vibrator got damaged

Thank you so much !

@mstphone

Жыл бұрын

Anytime dear

This worked on my phone only for a short time. Buying a new flex-cable would fix the problem and it charged at 2900mA

@ll3yWanTeD

Жыл бұрын

Nice manfriedmann

THANK YOU :DDDD

I did this, saved a couple bucks hehehe

@mstphone

2 жыл бұрын

My pleasure

@ll3yWanTeD

Жыл бұрын

Nice one!

@redshirt256

Жыл бұрын

@@mstphone It saved me getting a new phone also, thank you!

Merciiii 😊 Mon téléphone recharge 👍

@mstphone

Жыл бұрын

Anytime

Thanks for the solution! I was able to test it by pressing on the back, it works but it's a bit random. I'd like to repair your video, but I don't have any equipment apart from a precision screwdriver. Does the hair dryer solution really work? Also, can you advise me on a dismantling kit and the type of glue to use to replace the rear shell? Thanks in advance! :)

@mstphone

Ай бұрын

Hello This link shows you all my tools kzread.info/dash/bejne/q3mT17mIhLK5dps.htmlsi=W-kaGQJgjIpDvwAc

@juliendauthuille1757

Ай бұрын

Thanks !

@juliendauthuille1757

Ай бұрын

@mstphone Finally, I did the trick, the phone switches to fast charging, but the battery doesn't want to charge any more... T_T So I ordered a new third-party battery on Amazon (impossible to find an original battery unfortunately), I installed it, it's at 9%. I plugged in the charger, it went from 9% to 1% in 2 minutes and the phone switched off, so I couldn't charge it any more... I'm at the end of my life haha ^^'. I'm going to have to think about buying a new phone, rip!

@mstphone

Ай бұрын

@@juliendauthuille1757 im sorry to hear that

Merci beaucoup, je suis française mais j'ai compris, j'ai enfin pu réparer mon téléphone qui était comme neuf pour 0€

@mstphone

Жыл бұрын

C'est génial, bravo frère

@MoroccanSahara903

Жыл бұрын

French language sucks 😂

Buen video , soy de Perú , tengo el mismo problema de carga . Que es esa pedazo de metal que pones para que haga contacto ? Es cualquier metal

Thanks, i have the same problem with my poco F2 Pro. But, can i know what tools you use to heat dan remove back cover?

@mstphone

Жыл бұрын

Heating station kada 858d+

@sNajlicious

Жыл бұрын

i just put a plate on my stove and use the lowest heat, than place the phone on it and youre good. cant recommend with a gas stove though

Merci beaucoup

tnxss i pressed and it works

@mstphone

Жыл бұрын

Anytime

@ll3yWanTeD

Жыл бұрын

Ok but we should order its pieces to replace

@sultoo2583

Жыл бұрын

@@ll3yWanTeD Yes it works 2 or three times when pressing, and I placed a piece of paper, now it's working

Excelente!!!

@mstphone

2 жыл бұрын

Thanks

@ll3yWanTeD

Жыл бұрын

Blz. Pagar ninguem quer kk

Nice ❤️

@mstphone

2 жыл бұрын

Thanks

waaah thank you po huhuhu pinindot pindot ko yung likod gumana biglaa yehey

Woooow looks like a common problem on f2 pros

Thanks bro, I did these steps and now it's charging properly, will I have the same problems again?

@mstphone

Жыл бұрын

Anytime dear, yea it may happen again

Hi MST, Thanks a lot for your video. I followed every step but it didn't work. I also replaced the flex cable and the charger board with no luck. I have a question about the tape/sticker that you are holding at 11:09. Unfortunately, I cut that in half when I was opening the back panel. Can it cause the problem not resolving after doing the steps? And how to replace it if it's important. Thanks a lot.

@mstphone

Ай бұрын

Hi bro, no this is not related, its just a heat resistant tape

@mstphone

Ай бұрын

Try pressing on these connectors while changing, see if start charging, also it could your battery goes under 3.3v , if that happens the phone can't start charging, also it could be related to charging ic problem !

@Mohamed.Ahmed.Hussein

Ай бұрын

@@mstphone Thank you so much, bro. I have ordered a new battery. Hopefully it will do the job for me.

@mstphone

Ай бұрын

@@Mohamed.Ahmed.Hussein anytime, i hope so too

I have a question. At what temperature does the adhesive melt?

@mstphone

2 жыл бұрын

I can't know exactly, but arround 200c , you will be good to remove the back.

5:38 What is this sticker good for? I've completed your guide, changed the connecting cable and it works nicely now! :) But I forgot to put back this sticker at the timestamp. :( Will it cause any problem? Does it have a shielding function or it is just a normal paper? Seems to be a normal paper to me.

@mstphone

Жыл бұрын

No it's okay, just a sticker

May i ask what kind of screw driver that you used to open

@mstphone

2 жыл бұрын

Sure its Wiha PH000X40

My bro, can u tell me what metal you put there? And what kind of adhesive wrap th metal? Thanks

@mstphone

Жыл бұрын

You can put anything same thin, it's just high resistance tape

all poco f2 pro have this problem or only some? I see a lot of people complain about this.

@mstphone

2 жыл бұрын

Seems all having same issue

@Darkar9545

2 жыл бұрын

happened to mee too after 2 years of use, this is so sad

what glue do you use? thx

@mstphone

2 жыл бұрын

T8000 B7000 Cp-0002 Anyone of these or similar can do the purpose

THANKSS BROO, SAVE MY MONEY HAHAHA

@mstphone

2 жыл бұрын

Anytime bro

Why didn't the charging speed work for you?

@mstphone

Жыл бұрын

Seems the connections not good, did you replaced something or you just did what i did ?

i got redmi k30 pro zoom which generic to poco f2 pro.. my phone still can charge but sometime turbo charger not appear until i put off and put on again.. did your think this method can solved my problem too?? thanks..

@mstphone

2 жыл бұрын

Yea could be, seems in this models connections is too weak, or its better to replace sub board with flex also.

@tahawk07

2 жыл бұрын

@@mstphone thanks for recommendation..

Hi, what kind of glue you are using? Where I can get it from?

@mstphone

Жыл бұрын

Cp-0002 Relief/ T8000/ B7000 All is do same purpose, you can buy from aliexpress.com ebay.com

@ll3yWanTeD

Жыл бұрын

@@mstphone cool! But i prefer someone do this for me lol

@mstphone

Жыл бұрын

@@ll3yWanTeD hope you find someone

Haha only faced this issue aft 2yrs of usage

Ehat type and brand of glue do you use to put the phone back together

@mstphone

2 жыл бұрын

The one i used CP-0002 black

Hello, Qestion when therse that paper or smth 1angle is to main system and one to second I switched it ant it charges then but qeastion is it ok ? please answer fast as can becuse dont know if it wont blow up or smth :D

@mstphone

Жыл бұрын

I didn't understand the issue, explain again

@titastarasevicius3689

Жыл бұрын

@@mstphone In video 6:22 The black stripe if I swap it conect to another is charging the phone, but doesn't it hurt or explode? thats what i wanna know is it ok if i switch it up?

@mstphone

Жыл бұрын

No don't swap that, you should be able to see the direction arrow of that flex cable.

Hii pls help me I need your help, the same issue happened to me It finally charged but the charging seems to go on and off, what to I do? It charges and then stop charges then stop

@ll3yWanTeD

Жыл бұрын

Lol no good bro nk good. Try again with some speciallyst.

Thanks, this seems to have done it! lets hope it holds

@mstphone

2 жыл бұрын

Hope so

Very nice. What is the name of the yellow card?

@mstphone

2 жыл бұрын

Thanks Its not yellow card, i mentioned in the video its a metal shield that covers components, i cuted a piece of it and coated with heat resistance tape, i coated it for few reasons 1 the metal was sharp it could damage the flex 2 to isolate any connection between any parts because its metal 3 to prevent any heat

@antoniosimeri6575

2 жыл бұрын

@@mstphone thanks you 💪

@mstphone

2 жыл бұрын

Anything you need bro 😊

@angellee9999

Жыл бұрын

@@mstphone can you use 1 mm cable?

@mstphone

Жыл бұрын

@@angellee9999 no, i don't recommend because you may end cut flex cable, using card we just pass through edges.

Can I put my main flex cable under the battery? just incase if the battery swell it wont tear the main flex cable upward.

@mstphone

4 ай бұрын

Maybe, but flex may be also short to go under battery.

After the fix indeed the powercharge now is great but side buttons do not work. Any info?

@ll3yWanTeD

Жыл бұрын

If you tried by yourself things like these can happen..