XFly-Model Tasman 1500mm STOL | UNBOX, ASSEMBLY, Radio & CG SETTINGS (English/Français) 4K
Спорт
Hi folks 👋🏻
Thanks a lot for watching and please subscribe to support the channel 🙏🏻🥰
Merci d’avoir regardé cette vidéo et n’hésitez pas à vous abonner 🙏🏻🥰
✈️ 🧡🌿 XFly-Model 1.5m Tasman PNP
Wingspan 1500mm, long 1150mm, 1550gr empty, With HRB 4S 2200mah 1785gr, Zippy 4S 2700mah or Admiral 4S 3000mah 1850gr
Wing load: 50g/dm2
3536 900Kv Outrunner Brushless Motor (ESC 40A)
11x7 2 Blades Propeller
9g Digital Servo x6
Jeti REX7 Assist
Book CG 60mm
Rates (low are my low/mid are book’s low/ high are book’s high):
- Ailerons and elevator (measured outer trailing edge) : 10/15/25mm
- Rudder measured at the base: 10/20/30mm
- Flaps: 20mm (1mm down elevator) / 40mm (2mm down elevator)
Thanks for watching and if you like my videos please like & subscribe ❤️ (it’s free héhé 😉)
Follow me on Instagram : / arthuraerorc
#stol #xfly #rcplane
Пікірлер: 38
Excellent build video. Finally, someone who goes through the entire process. Tired of others who just screw an airplane together and doesn't do the other essential chores. Good job.
@ArthurRC
2 жыл бұрын
Haha yes i wanted to show people the real process and with some mistakes so you won’t do the same mistakes 😊 thanks buddy for your support 🙏🏻🙏🏻 🥰
I just bought one. Haven’t flown it yet. This plane is actually scale - it’s a Glasair Sportsman N11YM to be exact.
@ArthurRC
Жыл бұрын
Ha coooool didn’t know that thanks for the information 👍🏻👍🏻🥰
speaking as a fairly new pilot who learned to fly this past summer, I recently picked up this PNP Tasman plane here in the USA...I haven't seen much about it or know much about the X Fly brand.....but the quality looks good, the price is very reasonable and speaking as someone wanting a plane that is both a trainer and can do some sport flying with power , I am looking forward to flying this plane in the spring.... nice video , thanks
@ArthurRC
2 жыл бұрын
Thanks a lot Gary!!! Yes you’ll enjoy it, so easy to fly and very powerful 😻
Very nice. It will be very nice, with the ski for the snow!!!
@ArthurRC
2 жыл бұрын
🤣🍾👍🏻👍🏻👍🏻👍🏻
excellent build of this plane I try to study how you connect the wires as I am also building the same plane but some trouble. Unable to make the flaps work. So frustrated!
@ArthurRC
Жыл бұрын
Oh ? That’s strange…..it’s a radio issue ???
I liked this aircraft but thought it looked very close to the FMS Kingfisher - (that I have) so I decided Not to get it - but I think I will get the Nova as soon as it is available in the UK. nice unboxing - thanks. watching the assembly - everything about this aircraft shouts out FMS to me - so many things are the same - It would not surprise me at all if was to turn out to be an FMS made airframe...
@ArthurRC
2 жыл бұрын
Thank you so much mate 🙏🏻🙏🏻
Thumbs up for the channel bud👍
@ArthurRC
2 жыл бұрын
Thanks a lot my friend
I do like this plane from Xfly, will be great to see in the snow. Great video👍🏻
@ArthurRC
2 жыл бұрын
Yes but without ski it will hard difficult 🤣
@DadsRCHangar
2 жыл бұрын
@@ArthurRC make some 😎
P.S FÉLICITATION POUR TON TRAVAIL.................................
@ArthurRC
2 жыл бұрын
Merci beaucoup ☺️🙏🏻
french and then english..fantastic...perfect.. thanks. great channel..
@ArthurRC
2 жыл бұрын
Thanks a lot 🙏🏻🙏🏻🙏🏻🙏🏻 I try to speak English as good as I can😁
@ArthurRC
2 жыл бұрын
I hope you subscribed buddy 🙏🏻🙏🏻😊
Nice job.
@ArthurRC
Жыл бұрын
Thanks mate ♥️
Hi Arthur! New plane for the Hangar! Good Unboxing and build video! Dont know your use right throttle in the Transmitter! Hehe Where buy this plane? I search at TurbinesRC but dont find this Xfly model... I cant waiting The Maiden Flight!
@ArthurRC
2 жыл бұрын
Yes I’m in mode 1 😜 You can find it at www.rc-castle.com because Turbines-rc.com don’t sell this one for the moment
Hi my frensh friend, looking forward to see the maiden👍. BTW nice colors. Greetings from Germany. Dirk
@ArthurRC
2 жыл бұрын
Oh yeah but the weather is just awful 😩😩😩 thanks buddy 🤩
L’outil pour gonfler les pneus, est une pompe Moiledard, ou une Moilebout???
@ArthurRC
2 жыл бұрын
Moiledard je crois 🤣
Nice model, but wing cabeling is worst - nothing for me. When it would have slot-in connectors, it would be much better.
@ArthurRC
2 жыл бұрын
Come on that’s just 4 servos 🔌 …that’s so easy and fast to assemble…
Would like to know the flying time of this model?
@ArthurRC
2 жыл бұрын
I didn’t flown with her yet but you can subscribe to my channel so you won’t miss my maiden flight 🤩🤩👍🏻
une élise se balance sur tout les axes, non seulement horizontalement .juste un commentaire sans rancune........
@ArthurRC
2 жыл бұрын
Yes tout à fait 👍🏻
Parler Un peu plus en français 😁
@ArthurRC
Жыл бұрын
🤣🙈🙈🙈🙈 il y a que 9% de Français qui regardent…..9%…tout le reste c’est anglo-saxon 😞