You are the coolest and pleasant rep person to listen to. You have a great way to explain the features of the products in a clear and simple way, a good flow when you talk that helps to follow you without get bored or overwhelmed ... I do check products from other brands, and oftentimes the person that introduce any of the gears I check out have a way that you just want to jump forward or even stop watching just because they can be too boring, no so well explanatory or lack in be articulate with personality, you seem to have plenty. Now back to this cool controller, as I come from analog studio with only outboard gears, nowadays for obvious reasons i shrank down my recording environment to travel size. midi Key Controller, 2 mac (laptop Imac) studio monitors,and Machine (drum). Software LogicPro, Reason 8, sometime I use studio one + loads of plugs-in. Recently I was re-touching an old product and fast like a rabbit I was on the mouse : solo, mute, faders down etc. to get the new feel and create a new dub or mix of that project. Now... I was thinking the good ol days with a 32 channels analog board where you could lean over and get into mixing ( Body & Mixing Board became One!) Now found the B. Touch X turn me on to get a portable unit (gadget0 to add to my portable arsenal... This way I can not only leave the mouse alone but mixing, again body and mix board...using faders ( brings that sound in or out, mute, solo it while song/track is playing and record it so that you can actually one up with a new remix without been a mechanical mouse-holder. My quest is: can I record with the X Touch this mixdown on the flow and save them? ( meaning fade in or out a channel, mute it or solo it, open the sends to a certain point in the song? ) So Sorry for this biblical message. THANKS A LOT! Alexia.

@behringer

8 жыл бұрын

Thanks for the kind words, we appreciate it! To answer your question, depending on your DAW and how it implements Mackie Control protocols, the X-TOUCH controller doesn't record but is able to handle things like channel faders, mutes, solos and sends etc for you to control during your mix down sessions. X-TOUCH is perfect for hands on control of what you want to control within your DAW!

@DjAlexiaTippell

8 жыл бұрын

Hi, thx for reply. I am on LogicPRO-X, I saw on ya video you were doing the demo with X TOUCH using DAW - LogicPro X so... I guess it should work fine then (?) As far as concern recording, I meant whatever I would do with X TOUCH, ( moving faders, mute or solo on the fly,) would it be possible record this within the DAW ? sort of like arm an automation, and while rec bottom is active in Logic X I could start to use the faders i.e. (raise volume, bring in or out certain sounds moving the faders of the XTOUCH,) mute and/or solo channels. Can it be possible to record all these info in Logic - play back the sequencer with the results of my "On The Fly" mix? I got the grip X TOUCH is a DAW controller, my aim is to understand if X TOUCH can transmit to Logic informations and record them... I really would like if this could be possible so I can have a mixdown using the X TOUCH instead of the mouse. Thanks again. Alexia.

@behringer

8 жыл бұрын

We understand Alexia, the X-TOUCH is able to handle automation to do what you are asking. Here's a video demonstration using Logic Pro X: kzread.info/dash/bejne/pIeWybtuo9WoqrA.html

@DjAlexiaTippell

8 жыл бұрын

Many Thanks ! :)

Connected this out of the box to my mac and BAM! Works awesomely!

Got mine yesterday. Still getting the hang of it but I'm quite thrilled so far!

Awesome video! Looking forward to getting one of these in the near future

Hey, Boss.. Just got my X Touch today in 2022.. Just realized a while ago, having a control surface like this was the missing likk for me mastering Logica Pro.. It made me realize I subconsciously hated using a mouse to manipulate a mixing board.. Thanks a lot for sharing

thanks for these webinars! Bummed that I missed them when they were live. I'd love to see more about using the x-touch as a controller for the xr-18.

@behringer

8 жыл бұрын

+Steve Albert Thanks for the feedback! We plan to provide videos demonstrating the functionality with the X-TOUCH Controllers and the X AIR Mixers in the future, as Phil mentions this will become available in a future firmware update.

just ordered mine for logic pro x...can't wait!!!

Great video! My question is: why Behringer doensn't write the user manual? So many details that the video doesn't talks about.

Great Vlog on this amazing controller..I need one, thanks

Im loving it

I'd love to see a demo of the X-Touch devices with Reaper on a Mac. I am seriously considering buying one of these.

Class on ProTools!

@behringer

8 жыл бұрын

+Bradley Saunders Stay tuned! :)

I just got my xtouch 3 days ago and it works great in Ableton. Just a few issues you can maybe help me with: 1. the touch sensitive faders don't respond - they don't highlight or select the tracks. When I touch them I can see the chanel info changing in the little displays, but that's all it does. I've tried midi mapping in Ableton and when I assign the fader to a track, it selects the track but then the fading stops working. Ableton told me the problem is the mixer is sending a "pitchbend" command and not a note to the DAW. 2. Pushing the global view button doesn't do anything but showing me the return channels. I can't choose audio- or miditracks or anything else. 3. I heard that MC doesn't support the different colours on the scribble strips but then it wouldn't work in any software using the MC protokoll. What's the point of showing them in your adds?

Can you do a video showing the functionality in Adobe Premiere Pro using the Mackie protocol? I'd love to see how the panel works for doing sound editing within a video NLE - it looks like this could be the perfect tool that video editors have been looking for.

Hey. I bought the x touch control surface and four extenders. I cannot get three of them to read. What am I doing wrong

I'm thinking of buying the X-Touch Compact but wondering if anyone has used it with Adobe Audition? If so, any issues?

Sold. Getting one thanks for the vid!

Can they work with Traktor for mixing in a club for a blind person?

Is it possible to assign specific faders/knobs to specific tracks? I am using a DAW to mix a band live and I do not need to ability to flip channel banks, but would rather have 8 permanently assigned faders. For example in my 45 track project, I want tracks 2, 3, 16, 18, 24, .. and so on to be assigned to faders 1-8. I realize this can probably be done using midi mode, but it would be nice to not lose the extra functionality of mackie control. Also I'm wondering can the master fader be reassigned? I don't know anyone that would touch the master fader in a project.

2 Questions, First- is there a way to "Hard assign" faders to certain tracks in logic? My mix template has the following busses Drums/Bass/Guitar/Vocals etc. I would like to have these front and center for quick access because im always muting/soloing, and working on these tracks more than all the others. Everything Ive seen so far just selects faders based on the first track selected in the active window, which always confuses me as to which faders are controlling what. SECOND- Do you guys offer remote consultation services/classes for users that want to optimize their workflow with your products? I am considering purchasing an x touch and If i could do a one on one session to get up and running with a personalized setup I would pay good money for that. Thanks!

Behringer are on it these days. Nice!

I'd like to make a suggestion of having and X-TOUCH expansion. I understand you can daisy chain 2 units together but in reality you'd only need the fader side not the transport wheel and everything else in the way...just my 2 cents

@behringer

8 жыл бұрын

We've heard your request and have been considering making channel extenders for the X-TOUCH, see here on our Facebook page: facebook.com/BEHRINGER/posts/10154420743863914

sup I hv a digi 300 can it wk with logic pro?

I really want this.

Hey Phil, I just recently purchased the X Touch myself and out the box from the get go I am loving it!! My only concern seems to be when I touch any of the faders it does exactly as it is suppose to do but it pulls up my plugins as well.. and that is somewhat annoying when editing.. would u possibly be able to tell me how to get rid of this problem?

@behringer

8 жыл бұрын

+MaxPainTV Make sure the "Plug-in" button at the encoder assign button isn't pressed and this should stop happening.

Very nice and helpful video. I wanted to purchase this, but I have a question so please answer my question, so I can buy this. * I am using logic pro x and if I am working with 25 tracks, then I can assign and work with all 25 tracks using this controller?

Would you be able to show how you set up the X-Touch to work with an X-air mixer. I have the xr18 and am thinking about getting this especially with the possibility of controlling over network in the future.

@behringer

8 жыл бұрын

+Juan Ortiz We did a live broadcast on this just recently. Check out our live broadcasts playlist on youtube to watch it.

hello. great video. the extenders look awesome (via the fb link)and will compliment the x-touch brilliantly. just a quick question, what is the x-touch like with fl studio using MCU protocols?

@behringer

8 жыл бұрын

This will ultimately depend on FL Studio's implementation of the Mackie Control (MC and/or HUI) control protocols. Please check with their developer for more information on what they do/do not allow to be accessed in their DAW software.

I have the X touch and Reaper. Although I enjoy it, a lot of the functions don't seem supported, such as touch selecting tracks with the faders, as well as marker, nudge etc.

@behringer

8 жыл бұрын

+Ernie Street All functionality is related directly and exclusively to the way your DAW implements Mackie Control (MC) and HUI control protocols. Please reach out to Cockos for clarification on how they implement them in Reaper.

Can you show how it will be work with fl studio and Presonus studio one?

What's the Difference between the Mackie Controll and HUI Mode in Cubase? And why the Counter-Display is not working?

@behringer

8 жыл бұрын

+Haetni The Counter display issue was addressed in the latest firmware update for X-TOUCH (v1.14 and later). You will have to check with CUBASE for their implementations of MC and HUI protocols.

compatible with Fl11?

Great video presentation! I have Auria Pro and the X Touch. I can only get the X Touch to be recognized by Auria Pro using the HUI protocol and it only offers limited functionality. Can you share Auria settings which work for setting up the X Touch using the Mackie Control protocol?

@behringer

8 жыл бұрын

+Radside Thats correct Auria utilized HUI instead of MC protocol.

Extra usb ports, touch mode and latch mode atomation, footswitchable punching in and out, plus touch sensitive and moterized faders. Have ya'll been reading my mind? Can you use the footswitch to activate record mode if you are two rooms away from the control room? And If you miss your cue can you set a point where it will restart so you don't have to walk back to the control room to back up the track and restart thats 40 feet away?

@behringer

8 жыл бұрын

+PNR Frontman Yes you can if your DAW is able to handle those MC / HUI protocol commands.

When i press play on my X-TOUCH my margin continually jumps or skips in the same place or spot of my project and will not play forward, but when i hit play on my X- TOUCH COMPACT it plays. What may be my problem?

@behringer

7 жыл бұрын

Please contact our CARE department so that we can help you. You can reach us by phone at 702-800-8290 (US) or +44 1562 732290 (UK) or send us an email to CARE@music-group.com and one of our technical CARE specialists will be glad to assist you.

hello so iam trying to set up the x touch an x touch compact so the act as one 16 channel instead of 8 channels please help been at it for days

Can I use it with 3rd party plugins like Slate Digital VMR and etc?

@behringer

7 жыл бұрын

As long as they are compatible with Mackie Control (MC or HUI) Protocols then yes they will.

@Tacochamp123

7 жыл бұрын

Can you make a video on how it works? I'd love to find a controller that allows me to ditch the mouse for most of my mixing.

I just bought this X-Touch, but i have 1 doubt: im trying to use it as a midi controller in Kontakt and midi cc controls.... with no result. Im using Cubase Pro 9.5 and Kontakt 5.8. Thanks in advance. :)

@dimitrispanagiotakopoulos5768

4 жыл бұрын

David Barrios it seems that nobody replied to your question. Have you figured out a solution around this problem? I would consider buying this for CC control. But does it work?

can i expect the same integration in Cubase?

Does anyone know if the xtouch black is smaller

The X Touch does not work all features on Pro Tools 12.5??? Because I can't get it to work or am I doing something wrong, Please tell me?????

@behringer

7 жыл бұрын

It will all depend on that's version of Pro Tool's implementation of the Mackie Control Protocols (in this case HUI specifically) Please check with AVID for more information on how they use these control protocols in their DAW software.

Excellent. Would you be able to do a similar session for Sonar?

@behringer

8 жыл бұрын

+Jim McLean We have more content coming in the near future, stay tuned!

@raumden

8 жыл бұрын

+BEHRINGER That would be REALLY cool!!

what os x are you using with logic x and these behringers?

@behringer

8 жыл бұрын

+Travis Eby He was using El Capitan during this demonstration.

Has Xair control via ethernet been implemented yet?

Hi Phil, Will these units work with Samplitude Pro X2?

@behringer

7 жыл бұрын

If Samplitude Pro X2 is able to understand Mackie Control (MC and HUI) protocols then yes they will.

Does it work well with Pro Tools? I haven't seen anyone who uses this device with Pro tools.

@behringer

8 жыл бұрын

+Bradley Saunders It does work with Pro Tools utilizing the HUI MIDI protocol. We plan to release more content on the X-TOUCH Controllers demonstrating functionality with Pro Tools. Thanks for your patience!

@bradleythekid

8 жыл бұрын

+BEHRINGER nice! thanks for the update!

Why didn't you provide an overlay for daws ???? it is a mess to reasign butons.....

what about reason 11?? help

nice presentation m'ookay ... i would love one of these m'ookay .. thanks for the information m'ookay ... m'ookay?

@amazonunboxed3407

4 жыл бұрын

Lol

So, how did it went with Fruity Loops? :)

Dude Phil is a frikin rock star. An idiot like me really needs a cool, easy going, and thoughtful dude like this to understand digital controllers. Plus I could never pull off that hat like he does, goddam legend.

Can you use the mini with xr 12 software

@behringer

8 жыл бұрын

Yes you can use the X-TOUCH Mini with X AIR products, but you have to program the X-TOUCH Mini using CC commands found in the MIDI implementation chart in the back of the X AIR QSG and Manual.

@lukedurant4200

8 жыл бұрын

+BEHRINGER ok thanks

How do I mute the master fader?

@behringer

7 жыл бұрын

Scroll through the fader banks until you get all the way to the master fader, then hit the mute button for that fader.

does the Behringer EURORACK UB1622FX-PRO work with logic ?

@behringer

8 жыл бұрын

The UB1622FX-PRO is an Analog Mixer, and doesn't contain a built in Audio Interface. It will work with Logic just as any Analog Mixer would, but will require some sort of Audio Interface to get signal in to your computer. We do make quite a bit of different Interfaces if you want to check out our website: www.music-group.com/Categories/Behringer/Computer-Audio/Audio-Interfaces/c/1234031?group=Audio%20Interfaces&colExpFlag=,Computer%20Audio,Audio%20Interfaces

@YesMeshari

8 жыл бұрын

Thank you for ur answer and i will check the website right now, but do u sell ur equipment out of ur city or at least ship it ? cause i live in dubai. Thanks !

@behringer

8 жыл бұрын

We do not sell directly to customers, but you can contact any of our authorized retailers for pricing and availability of our products: www.music-group.com/Categories/Behringer/Loudspeaker-Systems/Portable-Speakers/B1500HP/p/P0B3G/store-finder

@YesMeshari

8 жыл бұрын

Cool, Thank you very much for the help and info

@behringer

8 жыл бұрын

Thank you for your support!

in studio one

Any ideas on getting plugins (logic pro x or 3rd party) to work on aux channel strips? The plugins button only seems to work on actual audio tracks, not aux channel strips. I'm open to any suggestions. Otherwise, I will just return the unit if the functionality is not fully baked.

“Get the fork out~~~ “

rockNroll beat subs.

Why is the audio and video so out of sync?

Class on ProTools!