WY-680 SEMI CUP SEALER HEAT PLATE NOT COMING DOWN FIX
Тәжірибелік нұсқаулар және стиль
This is a video on how to trouble-shoot a Semi Cup Sealer Machine . The trouble-shoot is regarding a heat plate that is NOT coming down on the machine. You will need to remove the screws on the back of the machine to expose the unit . More than likely, the wire on top has a LOOSE or DISCONNECTED wire that is inhibiting connection to the machine to lower the heat plate. Reconnect, glue, or screw back the wire into the metal outlet. This will more than likely resolve the issue .
This video also helps you DETECT where the sensor is LOCATED on the machine . The sensor is the 3x colored wire located at the bottom of the machine . This is if you need to replace the sensor on the machine.
ONLINE INSTRUCTIONS :
wyzworks.freshdesk.com/suppor...
TROUBLESHOOTING GUIDE:
wyzworks.freshdesk.com/suppor...
Пікірлер: 18
What is the best glue to use to reconnect the wire?
Hello, the hear plate in my machine is coming down twice, the first time for short period of time and the send one for long time untill I off the machine and on it back then it will realize the cup, which make the cup melt sometimes.
I check everything that you showed and everything are in place, but the sealer doesn't lower and the roller kept rolling. Please help. Thank you.
How test the film sensor because have the same problem
bro sometimes its not seal properly by my machine,can u tell me why?
can i contact you directly for an issue wy680?
How troubleshoot eror05 in mecine cupsealer otomatic
Hey guys, I bought this product 2 months ago and the middle thing doesn't work, it won't come down to seal the cup, I have a small business and I need to fix as quick as possible, let me know what can I do, I've tried already the steps from the video and it doesn't work
@CISinks
7 жыл бұрын
Sure. Our e-mail is sales@supertobuy.com
Hi guys! My cup sealer is working correctly but when it seals and rotates, i lose a lot of film because it rotates 3 films at a time
look for cup sealer 2ndhand
Do you have any email, where I can contact you?
@CISinks
7 жыл бұрын
Did you try to open the machine and see the loose wire like the one in the video?
Hey guys, my cup sealer is cutting the film, but it’s not sticking to the cup. And it is 150 degrees
@CISinks
6 жыл бұрын
Try 175 degrees. ALSO , what cups are you using ? You need to use a FLAT lid on the cup . If the lip is ROUND, it will not cut. Also you need to make sure the CUP FILM matches the CUP Material. If you have PET cups, you need PET film. If you have PP Cups, you need PP film. If you seal a PP cup with PET film, it will not seal correctly . See if this is the case.
@CISinks
6 жыл бұрын
wyzworks.freshdesk.com/support/solutions/articles/19000021476-semi-automatic-cup-sealer-installation-setup ONLINE INSTRUCTIONS
The plate came down and it wouldn’t come back up again.