Another perfect restoration with the result being the part looking like brand new. Plus, no one ever show how to clean the fins and restoring the cooling efficiency. Your work is amaizing!

@RRCRestoration

Жыл бұрын

Thank you so much :)

@CrazyCat229

Жыл бұрын

And he sounds like Collin McRaye

@dmacarthur5356

3 ай бұрын

What media are you using in your vapor blast cabinet? ​@@RRCRestoration

To heck with Ocean waves, or Fountains, Babbling Brooks, etc., *this* is downright calming and soul soothing. Bravo to your channel and all your cool resto's man.

Great as always. You're the Bob Ross of restoration, it's very well made and relaxing to watch.

@jmdean_

7 ай бұрын

Underrated comment!!

I really enjoy these short videos on single component restorations in this Impreza series. And I think that adding some genuine RRC narration makes them both a bit more educational and also personal.

@RRCRestoration

Жыл бұрын

Thank you so much, glad you enjoyed it :)

An audio & visual joy once again dude 🙏🙏🙏. And thanks for sharing the knowledge as well. Top job, as ever 👏👏👏. 😎

I have to say that your accent makes the detailed work, feel more precise. I'm not sure why but I think it's soothing, mate. Cheers from Delaware USA . I greatly appreciate your painting experience and advice 🙏🤙🤘. Beautiful work

Great job on this intercooler, it looks brand new 👌 Thank you mister 😉

Well done Buddy, Great work, clear precise commentary and a good bit of music to finish with. Your Videos just get better and better. I cannot think how long that must have taken, not just the work on the Intercooler but the video work, setting up the shots ( I still love the anonymity aspect) and the video editing. A real tour de force.

Another great rebuild. For years I have been using a screw driver that I’ve shaped for radiator cores. But now I’m using tweezers. Great job old mate.

Short, concise and clear. It's so fun watching your video. Looks like new stuff. Excellent work, man.

@RRCRestoration

Жыл бұрын

Much appreciated! :)

Ah yes the old Haynes Manual phrase "reassemly is the reverse of disassembly" 😂😂. Great Video as usual!

Sir you are an artist, it's a pleasure to see your works

Great restoration. I was fooled by the thumbnail though - it made me think you were going to spray the STi logo on the fins.

Always very relaxing to watch (and of course, interesting). Thank you very much !

@RRCRestoration

Жыл бұрын

Glad you enjoyed it! :)

Beautiful work as always!

I really need to get those pipes for mine. I havent really thought about it. Well done, as usual!

TIL petrol is a great solvent! Obviously you need the area to be well ventilated to avoid an explosive atmosphere, but it got that oil out beautifully!

Turned out nice! Tweezing fins sounds mind-numbing!

@RRCRestoration

Жыл бұрын

Thank you, Yeah it is rather tedious but well worth the effort.

Two flathead screwdrivers are beat for straightening the for perfectly and swiftly

I don't envy you straightening those fins!

So pleasure to se you motor-videos. It is nice to see how accurate you do this. Im German and if I dont know I would say you too! Sometimes just difficult to understand because you speak little fast.

@beakittelscherz5419

3 ай бұрын

Moinmoin aus Oldenburg! Du kannst Untertitel nutzen in Deutsch und Englisch. Nach ca 25 Videos oder so hat man sich daran gewöhnt wie er spricht. Jetzt muss ich nur noch ab und zu mal reinschauen , wenn ich einen Motor Begriff nicht kenne oder akustisch nicht richtig verstehen kann. Einer der besten Kanäle auf KZread! Vielleicht gefallen Dir auch diese: - Musti1 -Itchy Boots - Low buck Garage - diesel Creek -Rambro/und schrauber zweitkanal vom gleichen KZreadr -CCE - Post apocalyptic adventurer (Kanal aus Deutschland , aber auf Englisch. Viel Spaß ps. evtl Kanal tipps von dir welche du gerne schaust?

Beautiful, professional work as always man. Love it.

@RRCRestoration

Жыл бұрын

Cheers buddy :)

Te acompanho do Brasil há muito tempo, excelentíssimo trabalho, a tradução automática ajuda bastante. Parabéns pelo melhor canal de restauração de autos e bikes que eu conheço.

I like these mini restorations. Much better. Keep it going and then just a finished product compilation

@RRCRestoration

Жыл бұрын

Really happy to hear you are enjoying all of these smaller videos :)

@rodneyhopper22

Жыл бұрын

It's spelled restorations dude you should've finished school 🏫

@SergioCosta-zf9zy

Жыл бұрын

@Rodney Hopper I did. Just not in an English speaking country. Thanks for pointing out my mistake and I hope that it gave your life some meaning.

Before Go-Jo we used gas to wash the grease off our hands. Ya, Im old! Great job as always!

Great job as always, big man!

Love those close-ups!

Outstanding job sir.

Zip ties or cable ties whichever you choose to call them are great for straightening the metal fins

You always make a difference no matter what you do, thank you.

@RRCRestoration

Жыл бұрын

Cheers David :)

for the first time come first!! excellent video as always!!!

@RRCRestoration

Жыл бұрын

Congratulations on being the first commenter :)

Love your work 👍

Your voice and voice-over reminds me of playing the PS1 Colin McRae intro level - good times 👍🏻

That comment for the algorithm😉 Always enjoying watching your vids!

@RRCRestoration

Жыл бұрын

Cheers buddy :)

I notice this is the way to cold brew coffee and piano tuning!😁

Another awesome restoration, well timed too as im removing mine tomorrow so gave me some ideas, just waiting for an in depth video on how you zinc plate! and ofc the impreza resto

great job as always lad keep up the good work

A very good install brother. A nice touch with tweezers on the intercooler fins.

@RRCRestoration

Жыл бұрын

Cheers Paul :)

08:09 thanks mate :-) Great work as usual - though one never gets used to your fantastic work.

Like a hit job on the radiator with Maria style preparation.

Another awesome job congratulations my friend

It sounds like a good idea to clean ANY still functioning Inter-Cooler that is found on these cars or any car for that Matter . It was amazing how much oil was inside this cooler .

Another fantastic restoration!!! I can’t wait for the next episode of this restoration. May I ask what was the solution you used in your ultrasonic cleaning unit? Thanks again for another entertaining and informative video. Cheers🥃

Cracking job again 👏

An air oil separator helps a ton with keeping oil out of the intake on boxer engine. I grabbed the IAG one, since it runs coolant through to keep the aos the same temperature as the engine. No condensation build up with the coolant running.

Nice job men

There is a specific tool for doing those radiator fins. I once had a blocked rad while in Cornwall and the place I went to took off the header and bottom, unclogged the core and resoldered it, then straightened all the fins with the tool.

Another good job well done there Big Man👍🏻👍🏻

@RRCRestoration

Жыл бұрын

Cheers Jon :)

been re building my pulsar gtir, your vids have helped me out a lot. thankyou 🙂

@RRCRestoration

Жыл бұрын

Nice car, always liked them :) I'm glad i could help you out :)

@crypticshroomer

Жыл бұрын

@@RRCRestoration cheers mate, keep up the quality work 👌

Love the restoration. I was a little behind on videos but already caught up. Although I am a little disappointed that there was no testing of the intercooler to check the arp sound.

TWEEZERS!!!!!! you are a genius. Screwdrivers just did not do the trick for me.

good to see my friend the towel in this episode, he's cool and strong

Howdy, enjoyed this video ( as always) , to be honest the vapor blaster stirs the rage of jealously😁. I have used plastic tool called a fin comb to straighten cooling fins in various radiators. Here ours get bent by 110kph+ impact with pre historic bugs. Tried flat blade screwdrivers, never tweezers though.😀

Those intercoolers are handy tool trays, hence the bent fins 😁

Options if you dont have a vapor blaster to restore the corroded outside?

Nice video as always. HIghlight of my week when RRC videos are on my playlist! Quick question: How do you know to apply grease on threads of bolts? Do you have a manual?

Let’s go! Another small but big restoration.

Perfect, as always. Need you for my boat restoration.

@RRCRestoration

Жыл бұрын

Cheers buddy, I've never really been involved with boats id probably be a bit out of my depth so to speak haha what kind of boat do you have?

@markusweber5561

Жыл бұрын

@@RRCRestoration its a Formula 31 PC from 1998 and there is a lot of work to do. New canvas, new ceiling, cleaning the engine bay. Sometimes i wish i could do all this work as perfect as you. But my job allows me not to spend so much time with it. Be sure youre my insperation

My OCD was very well satisfied with the cooling fin straightening, cheers 🍻😎.

@RRCRestoration

Жыл бұрын

Glad to be of service :) lol

What sealant did you use on the IC to keep it from oxidizing?

Really nice job👌🏻

Nah, you sneaked out and bought a new one didn't you 😜 Another fantastic restoration, after the cleaning I noticed the few bent fins and though hmm, what to do about those, but I had no worries when I saw the tweezers on the bench.

Enjoy this so much. Lets me know the pain of some of the work I gotta do lol. Curious to know the Y pipe upgrade you got. Ive seen many silicon ones, but never metal. And I would prefer that.

Love your channel! Curious how many different camera you use at once? Your videos give the impression that there are many cameras involved!

From the thumbnail I was wondering how the heck you got the fins so clean. low pressure vapor blasting makes sense! I really want to find some kind of rubber tipped perfectly sized and shaped tool to straighten fins. They never seen to come out just right even with the combs I have. I do have a 3D printer now. Maybe I should just make something. Great work!

@Shace616

Жыл бұрын

I've been told to use wooden skewers in the past.

Thank you so much for your video

Another gorgeous restoration 👍 id be ditching that bov entirely, but its personal preference. Itll be better than factory by the time youre done with it 😊

Good tae see another Scot who loves makin tha engine an bay look brilliant

@RRCRestoration

Жыл бұрын

Cheers Cora :)

@rodneyhopper22

Жыл бұрын

Need to take up some spelling lessons

@corahughes7768

Жыл бұрын

@@rodneyhopper22 An ye need tae no be rude fer ye ken anythin bout someone an their culture. It's okie, ye only care bout yer sel an yer own culture. Thas how entitled "sovereign" toxic americans are. Of which ye obviously are. Ah love ma sel when ah go tae bed at night. 💕 Can ye say tha same? Cheers! 😋

Awesome 🤙

great video as usual

Cant wait build it already lol but serious every thing you do is brilliant

@RRCRestoration

Жыл бұрын

Thank you :)

SO GOOD! :)

Great video! Given its an Impreza, no prizes for guessing how that oil got in there 😂 also, do you have any recommendations for sealant clearcoats to use on stainless?

Ayeee perfect-o!! 👌🏻👌🏻

choice of lubricant type when reassembling the recirc valve piston?

Does the coating on yhe aluminium effect perfotof the intercooler?

so ive dealt with turbo honda everything from D to K ..... 1 question was that bov bolted to the inter cooler?

I would rename that tool box from Snap-on to Crack-on!

great job

Love this series but cant wait for a bike one . I would love for you to do an first generation Superbike again

@RRCRestoration

Жыл бұрын

I feel exactly the same way, as much as i like working on the scooby i cant wait to get cracking on another bike restoration :)

@denniz1990

Жыл бұрын

@@RRCRestoration i love all your work because of the way you explain what you do in a fun and interesting way . Your also one of the few youtubers that responds . Would love to see an srad rebuild ( mine finally runs after a carb rebuild )

What ultrasonic cleaning solution do you use RRC?

Nice job. Must take a lot of patience to do all the straightening.

More fantastic work, this is going to be an amazing example of an Impreza once its done. Can I ask what you use to seal the aluminium?

@zardportugal

Жыл бұрын

"Can I ask what you use to seal the aluminium?" That is the big question. Cheers.

what fluid did you use for clean in ultrasonic cleaner ?

After an hour of tweezing all the fins straight I went to take off the y pipe. As I was unbolting the tab on the flange with the threads snapped off. Defeat.

What sealer is used please?

What kind of sealer do you use?? What brand is the wapor cabinet?

Super travail 😇👍🤩

Thank you for the video. Can you tell us what sealent you used for the aluminium?

@filiprolek7509

Жыл бұрын

I would like to know as well :)

What sealer did you use? Is it clear coat? Because that would inhibit it's cooling ability.

Did you use heat proof laquer to seal the alloy cooller please

What sealer did you use?

Love the vapor blaster, is that new?

The BOV is on the intercooler? Thats pretty neat!

What type of clear coat did you use? How has it held up so far? I'm actually in the process of restoring an STi intercooler myself!

Good job

hey! great job. such patience! tell me, when you put the blow off valve, why dind`t you put gasket maker on BOTH sides of the gasket? are boost leaks more comone onthe intercooler side than BOV side?

@JakeFaulkner

Жыл бұрын

he did - check 10:10, there's already hylomar on the BOV

Maybe someone asked but would a radiator or AC Fin Comb not reduce the time on straightening?

Was that Irn-Blu in the ultrasonic cleaner? 😅 Really though, what are you using?

The sealant you used was this just a satin lacquer?