If you’d like to further support our farm channel then be sure to Subscribe!
Жүктеу.....
Пікірлер: 58
@07kodygsr10 ай бұрын
We have a 2555 open station on our farm. Love seeing the old ones runnin
@Bits-of-Bytes Жыл бұрын
Very cool. What brand is that net wrapper and approximately how much does it cost per bale to wrap them?
@RoccaDiCambioFarm
Жыл бұрын
It’s a Salsco wrapper and I think it’s roughly $3 a bale
@marcelaghilan43649 ай бұрын
😊
@jerrylansbury9558 Жыл бұрын
I built my own bale wrapper like this one....... dont cut the plastic when the bale is finished wrapping......dump it......and set the new bale on the plastic thats streched across the machine. Should not have to do anything but wrap !
@richardbyrne99002 жыл бұрын
Well
@jerrylansbury9558 Жыл бұрын
I built my own bale wrapper like this one from bottom up........works great.....if interested.......give me a way to contact you.
@RoccaDiCambioFarm
Жыл бұрын
Thank you. I tried what you said and it works great!
@jerrylansbury9558
Жыл бұрын
@@RoccaDiCambioFarm Great to hear it works for you ! Also.........when starting a new bale and the plastic if not attached to anything...."".before ""putting the bale on the machine have him tuck the plastic under one of the belts on the wrapper. It saves time. This way when its 20 below zero.... the plastic is not still attached to the net wrap. Maybe you remove everything at one time........but I use twine. Its so annoying to have the plastic removed...but not quite. .just that one tied on tip is still there. Another trip off of the loader tractor. !!!!! Your operation is almost exactly like mine. I try to leave a space between the bottom bales so the dog can get between the bales. This way coons .....rabbits wont bother the bales quite as much. The dog makes his daily trips hunting for mice rabbits.........whatever ! Your Grappler is nearly the same as mine. Love that thing ! I use round bale feeders to feed the cows. I fixed a " Y " shape inside my bale feeders using light duty chains. Bolted in the center. The chain hangs down in the center of the bale feeder about two feet. I use my grapplers to move the bale feeders by straddling one of the chains and lifting them with the grapplers. However before you do that.... consider welding a bur on the top side of each side of the grappler. Otherwise the chain slips off. Then always keep the grappler tipped slightly downward. Or the chain will slide back. It can become a problem getting the bale feeder / chain off of your loader / frame !
@lumbercapitallogyard2 жыл бұрын
Never get discouraged, your channel will eventually start to really growing, the main thing is persistent! I know you’ve probably heard that a lot but it’s true.
@RoccaDiCambioFarm
2 жыл бұрын
Yes I post every Sunday no matter what. Thanks Em your the best. I excited to see it start growing. I have some awesome videos planned. I think once we have the LT40 that’s when it will start growing. But I don’t want to get too famous because I don’t want money to change me!
@tomaszpolok8759
2 жыл бұрын
Vąą awa W KOŃCU 6KUY
@silviapascale4559
2 жыл бұрын
@@RoccaDiCambioFarm iiwoqqjdjrurqrg6
@borbalaandrusko3648
2 жыл бұрын
Jo
@husensabnadaf4975
2 жыл бұрын
@@RoccaDiCambioFarm y000
@OnoratoRestorations2 жыл бұрын
Hard work definitely pays off
@RoccaDiCambioFarm
2 жыл бұрын
Yes I love seeing the final product
@jamesfrancis1983
Жыл бұрын
Hi e@@RoccaDiCambioFarm I will
@user-lg5dw4vq8gАй бұрын
😂😂😂😅😅
@OnoratoRestorations2 жыл бұрын
You should wrap your brother with that. Lol
@RoccaDiCambioFarm
2 жыл бұрын
I mowed and baled everything! He raked and wrapped. Lol
@KBuist-pn1dz
Жыл бұрын
Jijjjjjjjjjjjjjjjjjjj
@Horea_Suciu Жыл бұрын
Tell me please what engine and hidraulic pump is on that wrapper.
@RoccaDiCambioFarm
Жыл бұрын
It’s a Honda engine not sure what pump it is sorry.
@Horea_Suciu
Жыл бұрын
@@RoccaDiCambioFarm how many hp does have the engine?
@soldierpooperpants99682 жыл бұрын
nice working if you keep on working u might be a big youtube channel with about 1m subs and u will have lots of good stuff on ur farm
Пікірлер: 58
We have a 2555 open station on our farm. Love seeing the old ones runnin
Very cool. What brand is that net wrapper and approximately how much does it cost per bale to wrap them?
@RoccaDiCambioFarm
Жыл бұрын
It’s a Salsco wrapper and I think it’s roughly $3 a bale
😊
I built my own bale wrapper like this one....... dont cut the plastic when the bale is finished wrapping......dump it......and set the new bale on the plastic thats streched across the machine. Should not have to do anything but wrap !
Well
I built my own bale wrapper like this one from bottom up........works great.....if interested.......give me a way to contact you.
@RoccaDiCambioFarm
Жыл бұрын
Thank you. I tried what you said and it works great!
@jerrylansbury9558
Жыл бұрын
@@RoccaDiCambioFarm Great to hear it works for you ! Also.........when starting a new bale and the plastic if not attached to anything...."".before ""putting the bale on the machine have him tuck the plastic under one of the belts on the wrapper. It saves time. This way when its 20 below zero.... the plastic is not still attached to the net wrap. Maybe you remove everything at one time........but I use twine. Its so annoying to have the plastic removed...but not quite. .just that one tied on tip is still there. Another trip off of the loader tractor. !!!!! Your operation is almost exactly like mine. I try to leave a space between the bottom bales so the dog can get between the bales. This way coons .....rabbits wont bother the bales quite as much. The dog makes his daily trips hunting for mice rabbits.........whatever ! Your Grappler is nearly the same as mine. Love that thing ! I use round bale feeders to feed the cows. I fixed a " Y " shape inside my bale feeders using light duty chains. Bolted in the center. The chain hangs down in the center of the bale feeder about two feet. I use my grapplers to move the bale feeders by straddling one of the chains and lifting them with the grapplers. However before you do that.... consider welding a bur on the top side of each side of the grappler. Otherwise the chain slips off. Then always keep the grappler tipped slightly downward. Or the chain will slide back. It can become a problem getting the bale feeder / chain off of your loader / frame !
Never get discouraged, your channel will eventually start to really growing, the main thing is persistent! I know you’ve probably heard that a lot but it’s true.
@RoccaDiCambioFarm
2 жыл бұрын
Yes I post every Sunday no matter what. Thanks Em your the best. I excited to see it start growing. I have some awesome videos planned. I think once we have the LT40 that’s when it will start growing. But I don’t want to get too famous because I don’t want money to change me!
@tomaszpolok8759
2 жыл бұрын
Vąą awa W KOŃCU 6KUY
@silviapascale4559
2 жыл бұрын
@@RoccaDiCambioFarm iiwoqqjdjrurqrg6
@borbalaandrusko3648
2 жыл бұрын
Jo
@husensabnadaf4975
2 жыл бұрын
@@RoccaDiCambioFarm y000
Hard work definitely pays off
@RoccaDiCambioFarm
2 жыл бұрын
Yes I love seeing the final product
@jamesfrancis1983
Жыл бұрын
Hi e@@RoccaDiCambioFarm I will
😂😂😂😅😅
You should wrap your brother with that. Lol
@RoccaDiCambioFarm
2 жыл бұрын
I mowed and baled everything! He raked and wrapped. Lol
@KBuist-pn1dz
Жыл бұрын
Jijjjjjjjjjjjjjjjjjjj
Tell me please what engine and hidraulic pump is on that wrapper.
@RoccaDiCambioFarm
Жыл бұрын
It’s a Honda engine not sure what pump it is sorry.
@Horea_Suciu
Жыл бұрын
@@RoccaDiCambioFarm how many hp does have the engine?
nice working if you keep on working u might be a big youtube channel with about 1m subs and u will have lots of good stuff on ur farm
@RoccaDiCambioFarm
2 жыл бұрын
Thanks for the advice! We are getting there!
@user-qe9ri3jc9o
2 жыл бұрын
٠
@richardward7345
2 жыл бұрын
@@RoccaDiCambioFarm l
@gentritnitaj1036
2 жыл бұрын
@@RoccaDiCambioFarm aqq
@visentehernandez6356
2 жыл бұрын
@@gentritnitaj1036 .llooop
⁰
7:29 COW MILK
@zeljkazeljkazeljka2674
Жыл бұрын
Kkj
*thnnhh
Oktcj
ت اون 9چ
Non
Kgjm
@aniaanka1670
2 жыл бұрын
Uf
M n