A NEW Cordless Pressure Washer Competitor in 2021: kzread.info/dash/bejne/lmdlqrpqprLfj9Y.html

@thecurrantbun

Жыл бұрын

Ordered one today and it’s thanks to your excellent review, which was really thorough, thoughtful and blooming well delivered. Thanks buddy 👍🏻

@RoadToDetailing

Жыл бұрын

@@thecurrantbun Thank you! I appreciate your feedback and I am glad that you have found this video useful. Let me know how you settled once you had a chance to try yours. Cheers, Viktor

Mate there was absolutely nothing you didn't cover in this review...bravo!!

@RoadToDetailing

2 жыл бұрын

Thanks Mate. At the end of this month there is going to be an other portable pressure washer test/review with a product received from a trustful Chinese brand. If you’re in to this kind of power washers, stay tuned for that. Haven’t opened the box, but the specs are very promising, so will see how that goes. 😉

You do a better quality video than the promotional videos of 99% of manufacturers. It covers everything I wanted to know about the product and as a result I bought the Worx power washer. Thank you so much 🙏

@RoadToDetailing

Жыл бұрын

Thank you Haggard! The backstory of creating this video was that moment when I was about to purchase this Worx Hydroshot myself, and I was looking for answers but couldn’t really find them. So I pulled the trigger and purchased the Hydroshot, and I thought, I try to answers them questions I had prior buying that, and hoped it will be useful for people who is in the same boot than I was. I’m glad it helped you, and I hope it will meet your expectations. Feel free to do an update on your comment once you will have a chance to rock your Hydroshot 🙌 Thanks for watching, Viktor

After several review videos of this product. So far you were the only one that gave great detailed review about this!

@RoadToDetailing

3 жыл бұрын

Thank you for your feedback Aronity! I’m glade you found the video useful! 👍🏻 Take care, Viktor

One of the best produced videos I've seen ! Well put together !

@RoadToDetailing

3 жыл бұрын

Thank you Bubba Rox! I’m glad you have found it useful 🙏

Good honest clear review of this product thank you for taking time to make this video look forward to more product reviews 😀👍

@RoadToDetailing

3 жыл бұрын

Thank you Chris! 🙏 it took a bit of a time to put this together, but I tried my best to cover all the questions I had before I bought this Hydroshot, so I thought it could help others too! Appreciate your feedback! Stay tuned for future uploads 🙌😉

finally someone trying it on a dirty car

@RoadToDetailing

3 жыл бұрын

🙌 it has the power to clean in my opinion 👍🏻

Way to go Victor. Great review! Keep it coming!

@RoadToDetailing

3 жыл бұрын

Thank you Bob 🙏

Best review I have seen. You used it on what it was made for! Light car washes for people who maintain their cars on a regular basis. And one of the only reviews to show battery life/info. Even if you have a water source at home I think this is still great. Your home spray nozzle is not going to produce 300psi. I just purchased one and I think it makes for a very flexible /multiple ways to wash your vehicle.

@RoadToDetailing

3 жыл бұрын

Thank you for your feedback! I’m glad you found the video useful! This is a great bit of a tool to have and I agree on the things you mentioned. If you have a tap to use, that’s even better, because the hydroshot will be slightly more powerful compared to using from a bucket (which is sufficient already). Hope you will enjoy using yours!

Excellent review of the hydro shot! I was on the fence about getting one, now I see it’s more than adequate to wash my motorcycle ( live in apartment no hose). Thanks, new sub!

@RoadToDetailing

3 жыл бұрын

Hi Greg, I'm glad you found the video useful. In my opinion, it's a great bit of a tool, especially useful if you live in an apartment, also. I use a Karcher K4 (which works from a bucket with further accessories, too), but there is 2 bigger downside compare to the hydroshot: it needs fixed power source, and because Karcher is more powerful, consumes double / triple time more water in the same time frame. Although, it's more powerful, but I think, the hydroshot itself has a decent power as well.

Best review I've seen in such a long time

@RoadToDetailing

Жыл бұрын

Hi Dan! Thank you for watching! I’m glad that you found it useful 🙌

Fantastic video of the Hydroshot! Keep up the great work….greetings from Texas!

@RoadToDetailing

3 жыл бұрын

Thank you David! 🙏 I’m glad you enjoyed the video. Take care, Viktor

Just found this review, brilliantly done and ended up with me buying that model 👍🏻

@RoadToDetailing

Жыл бұрын

Thank you Eddie 🙏 I’m glad you found this review helpful. This model is a great bit of a kit. Obviously has its limitations, but one of the best in its class.

Thanks for sharing! Current waiting for my hydroshot to arrive 👌🏻

@RoadToDetailing

8 ай бұрын

It’s a great piece of kit. I hope you will like it, too 🙌

Great review, the multi nozzle is brilliant! Thank you!

@RoadToDetailing

Жыл бұрын

I’m happy that you found the video useful 🙌 Thanks for watching

Brilliant review, really well presented. So think I'm going to buy one now thanks ; )

@RoadToDetailing

3 жыл бұрын

Thank you Micky! This is a great bit of a tool 👍

Great product review 👍 very thorough too showing all aspects of the product and it's cleaning power. The best review I've came across on this pressure washer. I've been contemplating whether yo buy one but now I'm convinced it'll be worth it. Thanks for sharing your experience showing us this 👍

@RoadToDetailing

3 жыл бұрын

Thank you for your feedback! I’m glad you enjoyed it and found it useful! This hydroshot is a great tool to have in my opinion, it has its place on the market! Cheers, Viktor

Great videos Viktor, keep it up man 🤟

@RoadToDetailing

3 жыл бұрын

Thank you Paddy! Very appreciate your feedback 🙏

Very detailed review. Thanks.

@RoadToDetailing

2 жыл бұрын

Thank you, I’m glad it was helpful. Tomorrow an other review comes about a new cordless pressure washer which is very impressive. Stay tuned 🔥

That bottle connected had me laughing! Great idea though just really funny as I've never seen it before.

@RoadToDetailing

3 жыл бұрын

Yeah, it’s kind of funny 🙂 It’s an okay tool (bottle connector) for occasional use, or as a safety net which you can bring with you easily. Good idea, if really nothing else you can choose from.

Excellent review, thank you for all the effort. Living in high rise with indoor garage and no water/power hookups and trying to eval solutions so yours was extremely helpful. Think I'm going with this for pre-wash/rinse and will pair with an IK foam sprayer. Wish Worx had a bundle for this model that included a 2nd battery!

@RoadToDetailing

Жыл бұрын

Thank you Karl, I’m glad you found this video useful 🙌 I also use an IK foam sprayer, that helps a lot during washes. I would say you are good to go with a single battery in case of WG630E (bigger battery) because that runs around 40-45 minutes. But if you feel you need longer working time than you can purchase a separate battery later, too. As you said, it’s a pity they don’t offer a double battery deal, but sometimes the battery goes on sale as well. 🤞🏻

Great video. Convinced me to get one. Subscribed 👍

@RoadToDetailing

3 жыл бұрын

Hi Craig, Appreciate your feedback! 🙏 My goal with this video was to give answers for those questions what I had before I purchased mine. So I’m glad the video was helpful! Let us know how you get on with yours in the future! Take care, Viktor

I washed several of these videos for this tool. Yours was best

@RoadToDetailing

3 жыл бұрын

Thank you Frances, appreciate your feedback! I'm glad you enjoyed it!

The most beautiful detailed video I've seen so you can click now I will buy it not after watching this good video.

Best video I have seen on the Hydroshot and finally convinced me to buy one. Thanks for your hard work in making the video.

@RoadToDetailing

2 жыл бұрын

Hi Chris! Appreciate your feedback and I’m glad you found this video useful 🙌 This Hydroshot with the highest power (in EU market) and the bigger 4.0mAh battery can be very pricey, but in my opinion is one of the best in its category. Don’t expect the same efficiency as a normal electric pressure washer, but if you have the patience and figure out the right technique (that will come after a bit of playing with it) of usage, this can be a very good little device in your arsenal. Let me know how you’ll get on with this. Happy Cleaning! Viktor

@christopdeck3457

2 жыл бұрын

@@RoadToDetailing Thanks for the reply. Having watched many videos I have limited my expectations as to what to expect, but I am hoping it will save me some time when it comes to rinsing the unit of my articulated lorry which is an MAN TGX, and is kept in a truck park with no water suppy. I will work through some of your other videos which all seem interesting. Greetings from Holland.

@RoadToDetailing

2 жыл бұрын

In that case, the hydroshot can work. Make sure to pick the bigger battery, it really worth it, as 15 mins of running time isn’t enough for a thorough job, hence you can work slower with Hydroshot, due lesser water flow, so you need to soend more time to get a decent outcome. And the bigger battery can do 40-45 minutes easily, also has fast charger option built in the charger. The only thing you need to consider is the water usage. Especially with a lorry, I’m sure you will need to use more water then usual. But you can calculate approximately the usage of 2-2.5L/minutes. Best way to have water supply is around a bigger barrel, but few 20L buckets will do the same, but yet again: they are also pricey. I would calculate with at least 60Litres of water for a thorough rinse in case of a lorry. But you’ll get the math right after the first 2-3 times of usage. 👍🏻 Thanks for the interest and for watching! Hope you’ll find my other content useful as well. Feel free to het back with any feedback, I appreciate them always. Best of luck with your cleaning goals 🙌

@christopdeck3457

2 жыл бұрын

@@RoadToDetailing Wow, thanks for the detailed reply. It will just be the tractor unit, not the trailer and I am hoping two 10 litre jerry cans of water will suffice. I will let you know how I get on. köszönöm

@RoadToDetailing

2 жыл бұрын

For sure, let me know Chris! geen dank 🙌

Great review, greetings from Greece.

@RoadToDetailing

2 жыл бұрын

Thank you MrElladion! I’m glad you enjoyed! Take care, Viktor

Excellent review

@RoadToDetailing

2 жыл бұрын

Thank you, I’m glad you found it useful 🙏

Great review !!!!

@RoadToDetailing

3 жыл бұрын

Thank you for your feedback Erik! 🙏

@erik9358

3 жыл бұрын

You welcome! 👍🏼 check out my video please

great review thank you.

@RoadToDetailing

3 ай бұрын

I am glad it was useful! Thank you for your feedback 🙌

Great review

@RoadToDetailing

2 жыл бұрын

Thank you! 🙏 I’m glad it was helpful! Viktor

Very good review 👍

@RoadToDetailing

4 ай бұрын

Thank you Shawn 🙌 I am glad you found it useful.

One of the best 'how-to' videos that shows every little detail you want to know about. I wish you could do the same video for the Greenworks cordless pressure washer. I just bought it (without the battery and charger annoyingly) but there aren't many videos on KZread about it.

@RoadToDetailing

3 жыл бұрын

Thank you POV Driving Tour 🙏 Feedback like this means a lot. This was sort of a big project and I was certainly tried to cover every questions I was looking for before choosing Hydroshot. I was looking for the Greenworks cordless range before too, because seems to be promising. However, I couldn’t find a decent source to buy from. Also, it’s price just right above the threshold of Hydroshots. If you willing to do a review about your Greenworks, feel free to share your thoughts here. The more information about cordless pressure washers we have, the better. 🙌

The water bottle connector looks good for small garden diy pesticide/foliar spray.

@RoadToDetailing

5 ай бұрын

Indeed. 👌🏻🙌

This first time I am see this I going try to get one for sure

@RoadToDetailing

Жыл бұрын

It’s not the cheapest thing in the World, but it is a great bit of a tool in its category 😉👍🏻

Love my hydroshot

@RoadToDetailing

3 жыл бұрын

Same as me Marc 🙌

love my worx hydroshot I have no water connector live in condo this work excellent for my audi rs4 love it lots :-)

@RoadToDetailing

2 жыл бұрын

Hey Lance! It’s great to hear that Hydroshot works to you in your circumstances as well 🙌 It’s a great bit of a tool for sure for making your car shine wherever and whenever you want 🔥 Thanks for watching

@lancegallant3647

2 жыл бұрын

@@RoadToDetailing Awsome deff no problem great video g j bro :-)

@RoadToDetailing

2 жыл бұрын

Thank you very much 🙌 Happy Cleaning 💎

With the big bottle attached, you need to support the bottle also it will probably help if you poke a ventilation hole at the top of the bottle or just loosen the cap.

@RoadToDetailing

2 жыл бұрын

Hi Chris, great tips! 🔥 I personally don’t like the bottle cap holder, but that could be a good option for emergency cases of clean.

Good review. What soap bottle did you used it as it wasn't in your unboxing section?

@RoadToDetailing

Жыл бұрын

Thanks P B, I used a generic foam cannon with quick release connection. Here it is : kzread.info/dash/bejne/ZYqAsdGqnda-ZJM.html Link to the exact cannon in description 🙌

Good content. Though not so much subscribers, i see good preparation for the video, structure and time management. Watched on 1.5 speed. Compare to washing car with Karcher K3-5 washing machine - water jet pressure significantly lower?

@RoadToDetailing

3 жыл бұрын

Thank you so much! 🙏 I was planning to have voice over under the review too, but I might update this video in the future. To be fair, the difference is significant compared to a Karcher, I have a K4 Compact, which I use as well (with a bucket of water though 😜) I’m planning to have a review about it in the near future. So back to the answer of the question: yes, it has a significant difference, but at the same time, I don’t feel like too much of an advantage of using a Karcher than a Hydroshot. Timewise: yes. As the Karcher has more power = faster water flow = less time and effort to clean. Although, I would say I achieved great outcome using a hydroshot, just in more time. If you’re using good detailing products with great cleaning abilities, Hydroshot could be enough with an advantage of being fully portable. If you have water tap and power source available, also time is an important factor, Karcher could be a better choice. If you don’t have water nor power source available for washes, and you are okay to spend a bit more time on rinsing off the car, Hydroshot could work a treat. So at the and of the day to get the right answer, we need to consider the circumstances, alongside with pros and cons. Hope it helps. If you have further questions, don’t hesitate to ask. The channel is very new, I have just started 2,5 months ago, so I hope it will grow when more content will be produced. Also, I’m glad you are enjoying them! Appreciate your feedback 🙏 Viktor

Awesome tutorial I think I will be buying one of these... I know you did a water test but where you able to use a 5 gallon bucket of water for entire wash just curious....I probably will get a foam attachment as well.....Thanks for sharing

@RoadToDetailing

3 жыл бұрын

I would say it depends on the washing process! What I would say is that, you would probably need at least 2*5 gallon buckets. 1 bucket: pre rinse, snow foaming 2. and 3. bucket: rinse off snow foam, wheels, final rinse after contact wash. That’s around 15 gallons. You can manage with 1 bucket, but then I would do: 1. APC mix on as a pre wash (no pre rinse with pressure washer) 2. Rinse off pre wash 3. Contact wash, 4. Rinse off contact wash Wheels either beginning or the end, whichever you prefer. I like to have snowfoam, it’s fun, but you will spend a bucket of water to put it on and rinse it off. ☝️ I usually used 2-3 buckets just for water source. But it is doable to do with 1 bucket, but takes some time to get used to the process 👍🏻 If you have further questions dont hesitate to ask. Cheers, Viktor

Excellent review faultless demonstration, correct me if l'm wrong but I didn't see a soap dispenser in the unboxing or is it brought separately?

@RoadToDetailing

29 күн бұрын

Thank you! Yes, you have seen that right. The foam dispenser what I used can be purchased separately 🙌🏻

Great video, how does the snow foam attachment work with this particular model/ I'm looking to use this for my car :)

@RoadToDetailing

4 ай бұрын

Thank you! It works alright, does the job. Needs a bit of play with the ratios at the beginning, but all in all, it can do the job with some limitations. I have a video available with a 3rd party foam cannon, where I used a thinner snow foam solution (Carpro - Lift), you can check it out, if you’re interested: Worx Hydroshot With CHEAP Snow Foam Cannon? BOOM. kzread.info/dash/bejne/ZYqAsdGqnda-ZJM.html Hope this helps, Viktor

It's good because you don't have to set up and pack away a regular jet wash. Just plug it into a hose and away you go. Low power is perfect for motorcycles that need frequent cleaning.

Hi great video !! Just to be clear you need two 40ah batteries for a running time of 40mins ?

@RoadToDetailing

2 жыл бұрын

Hi George! Thank you, I’m glad you enjoyed. No!with this certain model, that only accepts 1 single battery: 20v but 4.0mAh (bigger, than normal), the running time I achieved is 40 minutes, and with the fast charger (comes with the bigger 4.0mah battery like mine in the video) recharges within 45mins. Hope this helps

Nice one Sir

@RoadToDetailing

2 жыл бұрын

Thank you 🙌

Really been looking at either getting a snow foam lance for my Worx or an IK Foam Pro 2. Any recommendations?

@RoadToDetailing

3 жыл бұрын

Hi John, It’s a tough call because it depends. ( I have and used both options) But, I would say, stick with any 1/4” Quick Release foam lance if you are planning to have your prewash by snow foam. I think, IK Foam is better to small areas for instance: wheels. For a whole car, you more than likely will need to refill the IK foam an extra time, also you need to pump the hell out of it for the whole car. At least, that’s what I did when I foamed the whole car with the IK foam sprayer, found it a bit annoying. However, you can save water usage by using an IK Foam, so that’s the reason I say: it depends, mostly on what is more important: using less water during snow foam: IK Foam, have a better snow foam, water usage doesn’t matter: foam lance. Hope it helps. You can check the Hydroshot with a standard foam lance from Amazon in the pinned comment. Let us know which way you decide. Viktor

Thanks for the video, since the foam container is very small, can we put a foam on the normal standard bottle?2L bottle, as they designed the foam container to fit outside the gun not as the water bottle, im wondering will the foam damaged the gun?

@RoadToDetailing

2 жыл бұрын

Hi Nanoo, Fair question. I used a generic snow foam cannon (1L) with it, and it works quite well in my opinion. The long gun of Hydroshot has a generic 1/4” quick release connector so it fits with 1/4” foam cannons. But it needs a generic (cheap) lance, hence it doesn’t requires any minimum pressure for work, like MTM Hydro Pf22 does. Here is a link for that lance I used with it with no issues: amzn.to/3MiIAe3 You can see in this video how much it worked with a “low foaming” snow foam. Hope it helps, Viktor

👍👍👍👍👍👍👍👍🧓🧓🧓🧓🧓🧓🧓👍👍👍👍👍🧓👍👍🧓👍👍🧓👍🧓🧓🧓🧓🧓🧓🧓🧓👍🧓👍👍👍👍👍👍😘🥰😘🥰😘😘😘😘🌹🌹🌹🌹🌹🌹🍉🍉🍉🍉🍉The most beautiful detailed video I've seen so you can click now I will buy it not after watching this good video.

Great review, got one about 2 weeks ago, now waiting for an extra battery, and for the soap bottle to arrive. one question please, what kind of detergent do I have to use? Does it have to be something specific please? Thanks

@victorxerri3072

3 жыл бұрын

Ok saw the video for the soap. Thanks! :)

@RoadToDetailing

3 жыл бұрын

Hi Victor, I’m glad you found the video useful. Yes, you need a specific soap. Which kind of soap bottle you have purchased? Which part of the World you are? I could recommend some good soap with it if you would like to? Take care, Viktor

@victorxerri3072

3 жыл бұрын

@@RoadToDetailing I am from Malta, I bought the original hydro shot foam bottle, thanks for the fast reply. I was thinking of stopping by to a local service station and check out what is available in my country.

@victorxerri3072

3 жыл бұрын

WORX WA4036 Acc Hydroshot Soap Mixing Container, 383 ml, Black and White

@RoadToDetailing

3 жыл бұрын

The worx foam bottle will do the job, although won’t foam up extremely. Try to look for a specific snow foam or for a decent car shampoo in it, also check your local auto parts store as they might have more specific shampoos/snow foam solutions. 👍🏻

Thank you

@RoadToDetailing

3 жыл бұрын

You’re welcome Khairul! Let me know if you have any questions👍🏻

@qyelee

3 жыл бұрын

@@RoadToDetailing ok sir...so far no questions bcs your video is full with info i'm looking for...

@RoadToDetailing

3 жыл бұрын

@@qyelee 🙏

@qyelee

3 жыл бұрын

Sir, have bought this yesterday. Now have one question. Can we make a thick foam using this unit?

@RoadToDetailing

3 жыл бұрын

@@qyelee what unit you have exactly? For foam you either will need a quick release (1/4”) foam lance attached or the worx soap dispenser. Do you have any of them? Or just the main unit? Once you attached a foam lance, there is an adjustable button on the top says + / - which you control the air/water through the lance and it will adjust the thickness of the foam. Let me know and I will do my best to help you further.

Is the supplier foam sprayer good enough to snow foam? It looks a bit thin compared to usual applications, would you recommend buying a seperate snow foam gun (which fits the worx hydroshot obviously)

@RoadToDetailing

10 ай бұрын

Hi, yes! I would not recommend the supplier foam sprayer, hence it’s very weak. I used this Hydroshot with a generic snow foam cannon from a 3rd party. Yet, it won’t give the same performance compared to an electric power washer, but that will definitely give you a better result than the supplier’s “foam cannon”. You can check what to expect from a generic snow foam cannon attached to this exact Hydroshot model here: kzread.info/dash/bejne/ZYqAsdGqnda-ZJM.html Hope this helps, Viktor

@PoppySausagelitter

10 ай бұрын

@RoadToDetailing thanks mate, great video, I've read the comments since and seen you've replied to this question a lot so thanks for your time

@RoadToDetailing

10 ай бұрын

@@PoppySausagelitter you are very welcome mate. Glad you found the video useful 🙌

Wonder if this can clean bathroom tiles molds..

@RoadToDetailing

2 жыл бұрын

A bit time consuming, but with 0 and/or 15 degrees angel it's possible. But I would use some cleanser on the tiles prior using the hydroshot on it to help the process.

What kind of coupling is on the nozzle? Will it take other attachments? Non Worx attachments?

@RoadToDetailing

6 ай бұрын

1/4” Quick Release. Yes 👌🏻

@ForestCounter

6 ай бұрын

@@RoadToDetailing thank you 😌

Curious how hot was that water you put into the bucket? Pressure washers need the cold water to keep the motor cool.

@RoadToDetailing

3 жыл бұрын

Thank you for your feedback Cameran! The outside temperature was around 5 Celsius, and when I filled the buckets with water, it’s temperature could be around 30 Celsius, as I used cold and hot water at the same time. Then the bucket of water stood out for a while before I used, so the water temperature dropped down further. I don’t know the exact temperature of the water when I used, but could be around 15 Celsius, which is sort of neutral, not cold nor hot. Great feedback by the way! It makes sense! Appreciate it 🙏

@cameranmanner4701

3 жыл бұрын

@@RoadToDetailing that temperature seems like a non issue. With mine, pending temperature. I use lukewarm water in my bucket.

@RoadToDetailing

3 жыл бұрын

I think lukewarm water is the best option. Most pressure washers are able to handle water up to 40 Celsius, but I think the same as you: the cooler the better, so fair feedback, as this info was missed from the video, but I’m glad you raised it here, thus the information will be available. Thank you

surprisingly it got a good foam under 350 psi

@RoadToDetailing

3 жыл бұрын

Indeed David! And I used a standard (1.25mm) orifice. But it would be more foamy with the a 1.1mm orifice which specifically made for pressure washers with low pressure like Hydroshot. I personally think, the level of foam it creates should be enough for the vast majority of people whose would like to take care of their car and would like to enjoy a bit of a snow foam during it. 😉

@GIPPY1983

3 жыл бұрын

@@RoadToDetailing gonna get my WORX 20V this week and the foam cannon, lets see if it works for me. it's so sad that we cant get 40V version in EU

@RoadToDetailing

3 жыл бұрын

That’s great David. Which foam cannon you have purchased and what type of Hydroshot? I think you’re gonna be happy enough if you accept its “limitation” and don’t compare to a regular pressure washer which is not meant to be against 😉👌

@GIPPY1983

3 жыл бұрын

​@@RoadToDetailing I bought same model as yours 20V 4Ah, and the foam cannon is MATCC with 1/4 quick connector, I will be happy if I can get same kind of foam in your video

@RoadToDetailing

3 жыл бұрын

That should work at least if not better than mine. Mine is a very cheapo and MATCC is a better brand. If you'd like to have thicker foam, consider to upgrade to 1.1mm orifice and it will definitely will help on that. Something like this: amzn.to/3d32Qki Also, be patient while find the right setting on the foam lance and adjust at the top of that (more likely towards minus) until you will be happy with the dense of the foam. I remember I struggled there a bit, but once I turned it fully to the minus or played around it was decent.

Hi, What input voltages are supported by the battey charger ?

@RoadToDetailing

2 жыл бұрын

Hi Sasha, Here are the details on the charger: Input: 100-240V , 50-60Hz, 160W Output: 14.4V-20V , 6.0A Hope it helps, Viktor

@sashakkkkk

2 жыл бұрын

@@RoadToDetailing It helps a lot Thank you

@RoadToDetailing

2 жыл бұрын

@@sashakkkkk You're very welcome! Take care

Hello, just wondering if setting the nozzle to 0 degrees has enough water force to damage paint on cars…

@RoadToDetailing

2 жыл бұрын

Hi RxKIKrX, I personally haven’t tried the 0 degree angle on car paint, but I personally wouldn’t try that on the car paint. It has enough power to cut half a cardbox paper, and the pressure power is very forced to one point which I think, yes, it can cause damage on car paint in my opinion, but yet again, I haven’t tried it myself. The most I would go and I think it’s safe but gives more cleaning power if needed is 15 degrees angle, but 25 is very sufficient overall. Hope it helps, Viktor

Thank you so much for the video review. Today I also bought myself such a device from Worx WG630.1. I see what quality asphalt you have on the sidewalk and cleanliness around. It is evident that you have order in the country and there are no corrupt officials who only steal money from the state. .. Consider that you are lucky that you were born and live in Ireland. And we and our Moldavia lagged behind you 200 years ago with our rulers who decide only their own pockets and in the country, like after the war, we don't even have normal roads ...

@RoadToDetailing

3 жыл бұрын

Hi lurie 777, I’m sorry to hear that your circumstances aren’t the greatest where you are at the moment. As you just mentioned, I’m lucky and thankful to have a better circumstances 🙏 I live in Ireland, but I’m sort of grown up in the neighborhood, as myself is a Hungarian born and raised citizen, so I might have a guess about what you’re saying and I really hope it will be better for you soon. Also, I’m glad you have decided to pick one of the worx hydroshot. It is a great little toy to use, and if you have any questions, feel free to ask and share your experience regarding to the Hydroshot you own. The more experience we share with each other the better. 👍🏻 Take care mate, Viktor

@iurie7776

3 жыл бұрын

@@RoadToDetailing Thank you for answering. I have a lot of worx equipment. I am a fan of this technique and I really love this brand. I always buy as something comes across on our internet but only used because the new Worx technique is very expensive for me. Something like this.

@iurie7776

3 жыл бұрын

@@RoadToDetailing Many of our Moldovans work for you in Ireland, in England. We, too, with my family are thinking to leave here because the costs are more than the earnings itself ... And our child does not shine in our Moldova any future if he grows up ... Something like this we live merrily ...

@RoadToDetailing

3 жыл бұрын

@@iurie7776 Hydroshot will fit quite nice in Worx's range with their Powershare technology. Also, what I like the most is that you can bring it and use it anywhere you go.

@RoadToDetailing

3 жыл бұрын

@@iurie7776 You are right. I know a good few people here in Ireland whose from Moldova. I cannot say that you should or shouldn't go, as I am not in the position to give you any advise, especially in a question like this. As every beginning is very hard regardless the country we are live in. However you might consider all of your options, and decide whichever you think the best for you and your family.

Used it from new just a couple of ties and then the motor ran on full power but no pressure ! What’s wrong, what do I do now ? ?

@RoadToDetailing

3 жыл бұрын

Hi Emilyn, Do you have the filter at the end of the hose properly? Once after I cleaned that, I put it back in the wrong way, so water couldn’t flow through the hose, as the filter was i a wrong way and stopped sucking the water. Easiest way to check this to first see is there any water goes in the hose, if not, that’s where I would start. Let me know how you get on 👌

Use power share battery charger now and get almost any other kind of tool you need and use the same batteries

@RoadToDetailing

Жыл бұрын

True, powershare is indeed great 🙌

i put the short spout on and couldn't remove it to put the long end on.

@RoadToDetailing

3 жыл бұрын

You need to pull back the brass quick release while you try to remove the nozzle tip. 😉

@purpleflower3839

3 жыл бұрын

@@RoadToDetailing Thank you, it worked.

@RoadToDetailing

3 жыл бұрын

I’m glad it did! Take care

Im enterest buying from philippine

@RoadToDetailing

3 жыл бұрын

Hi Sultan, I live in Ireland (Europe), so I am not fully sure about prices and shipping to Philippines. I bought mine through Amazon. You might be able to shop their US store: amzn.to/3d9J9q2 Or Amazon’s UK store: amzn.to/3tTOqIZ If not, you might find a Worx Tools reseller in your country or through their website. Hope it helps! Viktor

How can you use the soap cannon with this model?..i had mine and not been able to use the soap bottle.it attaches well but doesn't spray foam at all

@RoadToDetailing

2 жыл бұрын

Hi Shahid, Can you help me which exact foam cannon you use? 1/4” Quick Release foam cannons should work just fine with the Hydroshot. I had a few struggle with the adjustments on top of the foam lance where you need to turn that towards the “-“ or minimum. Meaning, the foam lance doesn’t let more water in the foam lance as necessary to provide pressure. If the adjustment on top of the foam lance does not in the right position and more towards to”+” than you get more water added to the foam lance, hence you won’t have any foaming action out of the lance. Make sure you use at around 100ml of soap solution with around 5-900 ml water in the foam cannon’s bottle. Try to play around the adjustment on top: 1. Attach the soap cannon 2. Pull the trigger on the hydroshot 3. Once the water coming through on the hydroshot: start SLOWLY turning that adjustment on top of the foam lance until you have a sufficient foam. This is how I did, and worked well. I use this foam lance : amzn.to/2XpMD3O Hope it helps, Viktor

@shawz7010

2 жыл бұрын

@@RoadToDetailing I use WORX WA4036....i have even tried changing lance as well.

@RoadToDetailing

2 жыл бұрын

@@shawz7010 I don’t have experience with that certain foam cannon, as there isn’t really any settings to adjust the foam. I would recommend to get some normal foam lance with a 1/4” quick release as I linked above. Also, you will have a much better foam out of the cannon compared to worx’s own cannon as far as I’ve researched. 👍🏻

@shawz7010

2 жыл бұрын

@@RoadToDetailing thanks I will do that ...you are a star

@RoadToDetailing

2 жыл бұрын

Hopefully it will sort your issue 👍🏻

I have a car but dont have electricity near where i parked the car. So i wish to buy this product and wash my car 1 time per week, or 2 weeks. is this product useful for me? How much water do i need for 10-15 minutes wash?

@RoadToDetailing

3 жыл бұрын

Hi airjordantr, That’s exactly what I’m doing, I had no power nor free flowing water. I would say you need ~3L of water for each minute you would use the Hydroshot. I usually do the car with 2 buckets (each 20L) = approx. 40L will do it. Wheels: 10L Snow foam: 10L Rinse off: 10L Final rinse off after contact wash: 10L. If you use other pre wash like an apc, than you can use the snow foam’s 10L to pre rinse the car before apply apc as a pre wash and you will be still good with the 40L. Hope it helps! Viktor

What is the white ball on the end of the hose that goes in the bucket? Can this be taken off?

@RoadToDetailing

Жыл бұрын

Hi, basically that little white ball helps to keeping the end of the suction hose deep in the water. You can remove it, but once you do, you can’t really put that back on its place later on. It’s a helpful feature, but obviously if the water source is deeper than the hose’s length between the end and the white ball, it might be better removing. If you’d use the hose with a regular size bucket, then in my opinion is a keeper.

@RoadToDetailing

Жыл бұрын

As rinsing, it depends on that what stage of rinsing. For pre wash, I would use almost the whole bucket, if final rinsing, then a bit more than half. Hope it helps, Viktor

@KM2399

Жыл бұрын

@@RoadToDetailing brilliant thanks for the advice and what a brilliant video .. Even like the music lol.

@RoadToDetailing

Жыл бұрын

@@KM2399 you’re welcome :) probably you are the only one who likes the music lol 😝 I’m glad you found the video useful 🙌

Does it come along with foam sprayer?

@RoadToDetailing

9 ай бұрын

By default nope

This is the one I purchased but it won’t attached to a foam cannon. I tried all the meguire adapter that came with their foam cannon and I just fell off the Lance ... are there any adapters for the hydroshot that works ?

@RoadToDetailing

3 жыл бұрын

Hi Janet, what kind of attachment you have with the foam lance? You can attach any 1/4” quick release foam cannon to the power lance’s quick release of hydroshot. This is where the nozzle tip goes. Make sure you fully pull the brass back when you attach. Let me know how you get on with it.

@janetb6413

3 жыл бұрын

@@RoadToDetailing oh wow I’m so grateful for your swift response cos I’m frustrated. Just got the delivery of your exact model the Hydroshot brushless 630e .. I also purchased the meguire foam cannon, it came with three adapters ( karcher k series , nilfisk pro & Bosch) the Bosch seem to fit the end of the extension Lance but easy slide off the nozzle adapter. So I don’t know which adapter works cos none of these fits 🙁

@RoadToDetailing

3 жыл бұрын

Unfortunately none of them connections will fit, as you can attach only a “quick release” type foam lance 😞 That’s the reason probably you are struggling, even the Bosch seems to match, but it won’t, as the power lance (the long black) of hydroshot needs to be there, and there is only one option on the end of it: quick release 1/4”. Hope it helps.

@janetb6413

3 жыл бұрын

@@RoadToDetailing thank you so much... I have seen the ones you mentioned on Amazon now, gonna have to return the meguire and get a different cannon with that quick release 😍

@RoadToDetailing

3 жыл бұрын

Yes, pick any of the quick release ones, and it will work a treat! Also much cheaper than Megs 👌

Mine turns on but no water comes out checked the hose if there is holes but nothing

@RoadToDetailing

2 жыл бұрын

Make sure you have put the water filter at the end of the suction tube correctly. If that is the wrong way, water won’t come through.

I can’t get the nozzle head to fit in? Does it take a lot of force to get it on I’m so confused

@RoadToDetailing

Жыл бұрын

No, it shouldn’t take too much of an effort. Did you pull back the quick release connection at the end of the lance when tried to fit in? Also, you should check the angle of the nozzle too, as you might need tit that in the exact shape as at the end of the lance. Hope it helps

@LongNguyen-ho9qf

Жыл бұрын

@@RoadToDetailing yup didn’t pull back the quick release haha thank you 🙏

@RoadToDetailing

Жыл бұрын

I’m glad I could help 😉

good video, greetings from Chile, I live in an apartment building and I don't have access to a water tap where I park the car to be able to wash it, would you recommend this product to me to wash my car ???

@RoadToDetailing

3 жыл бұрын

Hi Roberto, Absolutely. I live in an apartment as well, so basically I have no other choice really to wash my car, other than using a Hydroshot. As it works a good amount of time and could suck up water from a bucket which I can bring with myself from home. So overall, I’m happy with it 👍🏻 It’s only downside is that Hydroshot is a bit pricey, but worth it, if you have no other options and you’d like to wash your car.

@robertoperez9504

3 жыл бұрын

Which snow foam lance do you recommend from Amazon for this pressure washer?

@RoadToDetailing

3 жыл бұрын

I would say any of the quick release 1/4” connections would work just fine, depending on your budget: amzn.to/3w23JBf The one I used is out of stock, same with amazon’s own, which is a budget option but out of stock too. Which I heard is good, but a bit pricey is Autoglym’s Foam Lance: amzn.to/3m2rzbB But it really depends on your budget. As I said, I think you can’t go wrong any of the 1/4” quick release ones. 👍🏻

@robertoperez9504

3 жыл бұрын

Ok, thank you very much for taking the time to answer my questions

@RoadToDetailing

3 жыл бұрын

My pleasure Roberto 🙌 Give us an update later how you get on with the Hydroshot and Foam lance! 👍🏻

I can’t get the nozzle head In the part you change the pressure setting

@RoadToDetailing

Жыл бұрын

Can you give me the time stamp where exaclty is this and which nozzle you meant?

@noorislam5353

Жыл бұрын

@@RoadToDetailing thanks for your response i managed to get it on soon after commented you

@RoadToDetailing

Жыл бұрын

That’s great to hear then :) let me know if you think I can help you further 🙌

I removed the filter screen in the connector to clean it. How do I replace it please? I don’t know which side goes towards the machine vs. towards the hose. Should have paid attention but I didn’t.

@RoadToDetailing

3 ай бұрын

Hi, which filter have you removed? If the filter is the suction tube filter, try to put it back whichever way, and if water doesn’t flow, just try the other way.

@newhiltonmembr3250

3 ай бұрын

@@RoadToDetailing I removed the orange screw that connects to the hose. It is the mesh filter that is between that and the black connector it screws into. Yes, that’s my plan to try turning it around to see if it works. The unit is not sucking up the water and am hoping cleaning that filter will work. I’m hoping I replaced it incorrectly. I replaced the hose with a new one and that didn’t help. Thanks for your reply!

@RoadToDetailing

3 ай бұрын

@@newhiltonmembr3250yep, try the other way around. Once I had the filter in the suction tube in the incorrect way, that was the moment when it didn’t suck up the water. Hope this will sort you. If not and if your hydroshot is still under warranty, then get in touch with the shop you have bought off. Or, try making contact with Worx about your issue and hope they can provide you deeper help. 🤞🏻

@newhiltonmembr3250

3 ай бұрын

@@RoadToDetailing Thanks very much! No, not under warranty any longer unfortunately, I’ve had it for a couple of years. I will contact customer service if it doesn’t work but not sure how helpful they may be. In the end, if I have to buy a new one , it’s not a big deal but haven’t used this one that much! LOL!

@RoadToDetailing

3 ай бұрын

@@newhiltonmembr3250 hope it will get you sorted. In my experience, unfortunately their customer care is sucks, but hopefully I was the one exception :)

I wanted to hear how loud it was but all I could hear was music

@RoadToDetailing

Жыл бұрын

08:17 is the moment what you are looking for. Also, the noise level labeled on the machine, which I show: 91db. Definitely not that loud than an electric pressure washer, but I would not call it quiet either. Absolutely generic noise level, never had a complaint about its being loud. Hope it helps, if you found the music terrible, at least this reply gives you something. Feel free to ask if you need further info. Thanks for watching.

I would prefer to see it cleaning dirty inground slabs to see how good it is at removing dirt from them & algae & green moss something were you see how good it is then

@RoadToDetailing

Жыл бұрын

Hi Terence, It has a decent power to be fair, but I haven’t tried this machine for a job like that. So, honest answer: I don’t know. In theory, I wouldn’t pick up this for a job other than a handy machine for light work. I think, in that circumstance you mentioned, probably would do something, but I rather say that, the end results wouldn’t make you happy at the end. Keep that in mind, this is only my guess, and I can be totally wrong, but I can’t see that the Hydroshot would have that much power to satisfy you in that area, even though, I believe the Hydroshot is one of the best in its class. I have seen reviews where people used a Hydrometer for their patio and stuff like that, and most of them was quite happy by the results. If you order from Amazon, give this a shot, and if you not happy, you can return. But at least, you will have your own experience within your own environment. If you do so, make sure you go for the more powerful machine, such as the WG630E with the fast charger. I mentioned this in the video, but the weaker and cheaper Hydroshots are “no go” zone in my opinion. (WG630E brushless and above excluded) So for the long haul reply. Hope it helps at least a bit, Viktor

You have to use mjjc

@RoadToDetailing

Жыл бұрын

Yes, that might work better.

Does it still work good ? the WORX

@RoadToDetailing

11 ай бұрын

I since moved to an area where I have both electricity and water source near me, so don’t use my Worx very often. But it’s still in working order. 😉

@12Radius

11 ай бұрын

@@RoadToDetailing Thanks 👋

Good for apartment dwellers. But I have a house with a hose and high pressures nozzle. Just turn faucet on and wash car. No need to fill up a bucket. This is useless for me.

@RoadToDetailing

3 жыл бұрын

Yes, in case of having a hose with water is definitely an advantage to have and probably won’t need a use of a Hydroshot there. Although it could be handy on a road trip or something, but I assume people rather wash their cars at home than when they’re on a road trip. In my case, this tool is a life saver because I don’t have any kind of water source which I could use. Might be a regular pressure washer could work better for those whose have a house with a hose, but not everyone needs or wants one 🙂

How many watts is it?

@RoadToDetailing

10 ай бұрын

20V battery power. 4.0 mAh. No information about wattage.

I live in a condo. I can take my SUV to a nice spot and wash w/o paying 12.00 for a car wash every weekend.

@RoadToDetailing

2 жыл бұрын

Absolutely 🙌

I take it that the foam cannon is not the one it comes with ?

@RoadToDetailing

Жыл бұрын

Hi Robert! No, definitely not the one, and I personally wouldn’t recommend the one it comes with it. Here is the one I recommend at least: kzread.info/dash/bejne/ZYqAsdGqnda-ZJM.html

How long does the battery last in the works hydroshot

@RoadToDetailing

Жыл бұрын

This specific model in the video lasts 40 mins. Cheaper versions only last 10-15mins.

@MI57Y

Жыл бұрын

@@RoadToDetailing how cheap would we be talking roughly?

@RoadToDetailing

Жыл бұрын

@@MI57Y roughly 35-50% but it won’t include fast charging, and 10-15 mins run time is simply not enough in my opinion. Hope this helps 🙌

@MI57Y

Жыл бұрын

@@RoadToDetailing thank you

@RoadToDetailing

Жыл бұрын

@@MI57Y you’re very welcome 🙌

Probably not the best if i want to power wash my vinyl siding?

@RoadToDetailing

13 күн бұрын

Sorry, I have no experience using this hydroshot to clean vinyl. Wouldn't be wise to make a suggestion here from my end. However, if you pick the right and proper chemicals, then this can be enough.

Im buying how much? From philippine

@RoadToDetailing

3 жыл бұрын

Hi Sultan, I live in Ireland (Europe), so I am not fully sure about prices and shipping to Philippines. I bought mine through Amazon. You might be able to shop their US store: amzn.to/3d9J9q2 Or Amazon’s UK store: amzn.to/3tTOqIZ If not, you might find a Worx Tools reseller in your country or through their website. Hope it helps! Viktor

Is 40 min for a battery or for both?

@RoadToDetailing

Жыл бұрын

Hi Levi, It is a single battery unit. And it runs around 40 minutes with it. Also, recharging a flat battery around 40 minutes. So if you have a spare battery, you can get continuous use, because while you are using one, the other one can be charged and swap when one of them being flat, in kind of a rotation if that makes sense.

@balevi6895

Жыл бұрын

What presore washer whit hight psi and cordless you recommend ?

@RoadToDetailing

Жыл бұрын

It really depends. Which country are you at? I’m more likely using an electric pressure washer (Karcher K4) that I can plug in, but use a bucket of water as a water source. For fully portable, I either recommend this Hydroshot WG.630E or Greenworks GDC40 but that is very expensive.

@balevi6895

Жыл бұрын

@@RoadToDetailing and something like small to fit in a backpack ?

@RoadToDetailing

Жыл бұрын

Unfortunately nothing pops up in mind that I would wholeheartedly recommend in that size, because none of them would be able to handle a proper job. Even a works Hydroshot, which is great, has limitations, such as triple the time of the washing process, but at least you will have a decent outcome.

You really did all that washing with 1 bucket? or did you use 2? I got the two battery hydroshot & 1 bucket ain't enough.... for me...

@RoadToDetailing

3 жыл бұрын

No, I think it’s not possible to finish under 40L of water. I usually use: 10-20L wheels 20-30L pre wash (pre rinse, snow foam, rinse off) 10L final rinse off. So, I usually use between 40-60L of water on a normal wash. I use 1 bucket which I refill if needed, and the other 2 buckets I use for 2 bucket method. Or, I fill up 2 buckets prior (40L), and use 1 bucket method for shampoo, but in that case I rinse off the mitt just as often as I would do with the rinse bucket. Ideally, in my opinion the best choice for water source could be a barrel or drum with the capacity of 50-60L of water. But I think there is an optimal way to do it with 40L (2 buckets) properly. I couldn’t be done with 1 bucket if follow the main aspects of a safe wash. Hope it helps.

@STicKy-IQ

3 жыл бұрын

@@RoadToDetailing key words "a safe wash" is all I'm saying.... I got sucked in with the 1 bucket wash thought process from other videos. Was washing about a month ago and was thinking there is no way this is a one 5lb bucket deal.... and I was trying to rush it😂

@RoadToDetailing

3 жыл бұрын

😂 what I think, you need at least 3 buckets, either doing 2 bucket or 1 bucket wash. If you can fill up 1 bucket more than once, only for your water source of Hydroshot, then you good to go with the 2 bucket wash method. If you can’t, and you need to feel each bucket once (no refills possible), then I would say: you need 2 bucket as a water source for Hydroshot and in that case you stuck with the 1 bucket method which you have your shampoo in, and you rinse off your mitt with Hydroshot every time before you get it in to the bucket with shampoo. I tried this, it worked quite well. For me, it depends on the circumstances of refill availability. However, I think if, we can think only in buckets, 4 would be ideal, but at the same time it’s not really cost effective, so 3 is the threshold 😝

Go on VIKTORRRRRRRRR

@RoadToDetailing

2 жыл бұрын

Thank you Jonny 🙌💙

Mine has 700 psi and man it cleans

@RoadToDetailing

3 жыл бұрын

I can imagine that, it has only 350PSI and does the job well. I wish we could have the 700PSI version available in Europe / UK.

@jensmuller9493

3 жыл бұрын

Too noisy for apartment building with underground parkimg. I prefer the model in this video.

@jensmuller9493

3 жыл бұрын

@@RoadToDetailing why is it not available? Company stupid and doesnt want to sell to 530 Million people? Still I won't need that extra power. Too noisy for my kind of usage

@RoadToDetailing

3 жыл бұрын

@@jensmuller9493 yes, it could be load, I personally don’t have experience with the 700PSI, but I can tell you the 350PSI has its kind of “avarage” 91db noise. To be fair, most of the pressure washers will have noise at around that level.

@RoadToDetailing

3 жыл бұрын

@@jensmuller9493 I don’t know why Worx only sell the more powerful machines outside of EU/UK, but as far as I saw, the more powerful Hydroshots not available directly in the EU/UK. However there is a possibility to import from the US, if someone really needs to. I’m okay with the 350PSI as well. Although I wouldn’t mind the 700PSI model either.

Was it the music that was 91db.....? felt like it! Goggles a good idea, obviously need ear defenders to protect from the music.

@RoadToDetailing

4 ай бұрын

Sure thing. I beleive there is a mute button. Hope you found something useful, at least. If not, good luck googling on 🤝

@lucifarian93

4 ай бұрын

@@RoadToDetailing Seen that Screwfix do one with two batteries so game on! great review, convinced me. Cheers.

@RoadToDetailing

4 ай бұрын

That sounds. Good luck mate, cheers 🤝

How many buckets of water did you use to wash the whole car.

@RoadToDetailing

3 жыл бұрын

Hi TRU VENTING, I usually use: 10-20L on wheels 20-30L pre wash (pre rinse, snow foam, rinse off) 10L final rinse off after contact wash. So, I usually use between 40-60L of water on a normal wash depending how dirty the car is. Hope it helps 👍🏻

That’s a weird battery setup compared to the one I have.

@RoadToDetailing

2 жыл бұрын

Which one do you have? Dual or single 20V 2.4mAh?

@danlux4954

2 жыл бұрын

@@RoadToDetailing i think its the single 20V

@RoadToDetailing

2 жыл бұрын

There is a 2.4mAh and 4.0mAh single battery. I had the 4.0mAh fast charging one, but models like 620 has the single 2.4mAh :)

Try using hot water

@RoadToDetailing

2 жыл бұрын

Wouldn’t recommend anything above 20-25 celsius, as it not certified as “hit water” usage.

Could I use it to clean dirty stinky trash bins. I want to start cleaning business $50 a month clean dirty cans $79 for 1 time

@RoadToDetailing

Жыл бұрын

Hi Richard! I think it will do, with proper use of chemicals for dirt removal. I would buy at least an additional battery to keep one on the charger while the other is used, and you can rotate them, so you wont be out of power and will have continuous work with it. Hope it helps, and good luck if you’ll going ahead with your business ☘️

Absolutely no reason for that loud music

@RoadToDetailing

Жыл бұрын

Noted, thanks for your feedback 🙌

@rmower3428

7 ай бұрын

I second that, I thought it was going to be about the power washer, boo boo........ off off off off, ha ha ha

@RoadToDetailing

7 ай бұрын

It is about the power washer 😉 music can be muted ✌🏻

91 DB seems noisy

@RoadToDetailing

26 күн бұрын

Yes. It is. But way less noisier than a “regular” power washer.

Fail to understand why you need music, people tuned in to your video because of what you were demonstrating a product, not to listen to what music you're playing

@RoadToDetailing

3 жыл бұрын

I’ve got your point. I thought that filling the demonstrations with music, especially when there is no voice over could be a great thing, instead of having silence. A big majority of demonstrating videos have this common thing, although many of them has only voiceovers. I tried to pick good flowing music, to make it more enjoyable to watch, instead of pure visuality only. I will consider your feedback as an option for future videos. Thank you for taking your time with a feedback like this Iliam. Appreciate it 🙏 Viktor

@lliambunter

3 жыл бұрын

@@RoadToDetailing Don't alter it for me , It's just something I don't see as a necessity

@RoadToDetailing

3 жыл бұрын

I understand that. All I say is that, it’s a good point and will definitely consider your feedback as an option for future uploads 👍🏻

@jeisonsanchez4842

3 жыл бұрын

This has its pros and cons. If you cut out the music then you have to at least leave in some background noise. Without audio, I can easily forget that I have a video playing if I put down my phone and something else captures my attention.

@RoadToDetailing

3 жыл бұрын

I agree. I picked to have background music because the wind was very strong, so I couldn’t have the natural sound of the surrounding. I was planning to have narration (my script for voiceovers was done already) but I couldn’t have the right circumstances to record that either. However, I put some subtitles on, but I’m thinking to re upload the content with voice over instead of having only background music, I just don’t know does it worth it or not. 🙂 Thank you for your feedback! I really appreciate it 🙏

Sorry but bad review Not on the product but on the video itself I want to hear how loud the unit is not blaring music I want to hear the person who is doing the review and see their expression while using the product Can't be done while music is blaring Talk to your customers feels more personal your not at a concert

@RoadToDetailing

Жыл бұрын

Thanks for your feedback Anthony. 🙌 I agree with some parts and got what you’re saying. Although, I don’t really feel I have “customers” who I need to talk to neither obligatory to watch this video. But I have a feeling that you missed a spot at 08:17 while watching the video (probably music was too disturbing to you than) but I showcased the sound of the unit, and pretty much covered every possible angle that I was thinking of before purchase the unit and wanted to know. If you’re are the kind of guy who wants to hear the person talk, that’s your preference, while others don’t want to hear them at all. People aren’t the same, and I stopped to try pleasing everyone myself. I do agree with some parts what you are saying, so recently I reworked this video for the main benefits, pros and cons of this unit and shortened this terrible review with awful music for people whose want to hear me and the device, which you can find here: kzread.info/dash/bejne/oGZk1NyqeK-blag.html Hopefully that will satisfy your viewing pleasure. Thanks for watching and being honest, I appreciate that 🙌

@anthony9869

Жыл бұрын

@@RoadToDetailing thank you for your responding and not just ignoring my post. The link to your other review was much better thank you 👍

@RoadToDetailing

Жыл бұрын

No problem Anthony! I’m glad you found the shorter video more useful, thanks for your feedback. 🙌

Another product that just isn't worth the cost, this video doesn't show exactly how loud this thing really is ,it's embarrassingly loud combined with no power at all , only thing that's useful about this junk is 2 battery's you can use elsewhere

@RoadToDetailing

7 ай бұрын

Thats is your opinion 🙌 I don’t know how to properly justify the loudness in a video, other than I did, and “said” with subtitles it is pretty loud.. also, raising awareness about the noise level itself. Are you sure you tried the wg630 model, not the weaker ones like 620, there is a huge difference between those 2 hydroshot models to be fair. Anyways, I’m not here to convince you, for me, this exact model worse the money, it helped out an awful lot of washes, and I can recommend it, based on my own experience ✌🏻

Its ok but ti expensive

@RoadToDetailing

Жыл бұрын

Yes, I agree. Not the cheapest.

A hose and a nozzle would do a better job!

@RoadToDetailing

Жыл бұрын

Could be, but that’s not portable. And in theory the hydroshot has more power. 🙌 At the end of the day, if that works for you, that’s all it matters 👍🏻

Crap music pissed off so switch off

@RoadToDetailing

2 жыл бұрын

Thanks for your feedback Ron. I hope you found the information useful at least 👍🏻

@roncooke2188

2 жыл бұрын

Yes very so good am going invest in one maybe two

@RoadToDetailing

2 жыл бұрын

Let me know if you have any questions. Here is an interesting option as well: kzread.info/dash/bejne/lmdlqrpqprLfj9Y.html Both are great options by different reasons in my opinion.