Drooling. REQUEST ! Could you please fly around small branches and objects ? since that's what is interesting with small quads and not open fields (more for planes) :)

@mariofpv

4 ай бұрын

Sure! But first I need to learn how to fly toothpicks! All these years I was flying 7” drones. They have completely different flying behaviour compared to this tiny 2” sub100 grams quad. Cheers mate!😊🍻

@DigitalFPViD

4 ай бұрын

@@mariofpv would you send me , im running D8 , and interested in whoop. I dont have the RTF tiny. But experienced with cetus pro. And self add Digital With high latency, i used my VRbox using android microusb capable to have uvc input, ived tried An old Logitech Uvc C110, it might be possible i can use your IPC, so sendme too. If you willing to send me ill send you an address here im in Indonesia.

Cannot wait to get my hands on one. Absolutely amazing Job. Congratulations to you Mario and your Team.

@mariofpv

4 ай бұрын

Cheers mate!😊🍻

Congrats on the support! 🎉 Looking forward to the release of the OpenIPC board 😇🤤

@mariofpv

4 ай бұрын

Cheers mate!😊🍻

First large FPV manufacturer sponsoring? ;) Lets go!

@mariofpv

4 ай бұрын

Yeap! And there is a larger one behind the scene but I can’t say anything at the moment. Cheers mate!😊🍻

@marc_frank

4 ай бұрын

​​​@@mariofpvi guess either runcam or foxeer more likely foxeer

@docekalt

4 ай бұрын

@@marc_frankwhat about skyzone?

@marc_frank

4 ай бұрын

@@docekalt could be

LOVE this Draknight! Bookmarked before inevitable purchase, great footage thank you!

@mariofpv

3 ай бұрын

Really fun to fly and very well tuned! Totally recommend for OpenIPC build as well! HGLRC did a little miracle over there. Cheers mate!😊🍻

Congratulations! great job!

@mariofpv

4 ай бұрын

Cheers mate!😊🍻

What a awesome lil quad! The 1080 to me is perfect all around and what I would use….. that camera turns that little drone into exceptional!!

@mariofpv

4 ай бұрын

Will be available soon. Cheers mate!😊🍻

My friend. I go hard on toothpicks. This is amazing

@mariofpv

4 ай бұрын

Cheers mate!😊🍻

no waaaaaay! finally we are getting a truly open alternative to digital fpv systems that is compact enough to be used on sub-250g quads! after hdzero saying "it's open" but using hardware that can only be bought from them, this feels like a dream come true! now just wondering how low latency can be achieved. have been spoiled by hdzero's 90fps low latency mode :P

@mariofpv

4 ай бұрын

Check the video description. Cheers mate!😊🍻

Thats awesome!!

@mariofpv

4 ай бұрын

Cheers mate!😊🍻

Amazing! Beautiful image. Can the brightness be adjusted if we want more details in the shadows?

@mariofpv

4 ай бұрын

Yes all settings can be adjusted even in the driver of the sensor! Cheers mate!😊🍻

Excellent Mario !

@mariofpv

4 ай бұрын

Thank you for the support my friend!😊🙏

OpenIPC is gold! I'm impationate to make my own fpv setup soon. By the way I have a question. In this and some of previous videos image quality is not very clear. There is some blurriness in the image even in 3K. What is the reason for that? Is the lens not focused perfectly or is the bitrate low? I watched other OpenIPC videos from youtube and some of them look much clear. Any clues?

@mariofpv

4 ай бұрын

It’s the combination of the lens I use and the fact that I’m always testing in low bitrate. You can increase the total link bitrate up to 52Mbps which will give you the best results. Cheers mate!😊🍻

Is onboard recording already tested on the prototype? It would also be nice to have gyro data on the sd card for gyroflow. Maybe it's possible to use the blackbox function of betaflight using uart?

@mariofpv

4 ай бұрын

I did a very quick test and it was working. I wasn’t so focused on this but I’ll definitely come back to this in the following days. Cheers mate!😊🍻

Yo bro, this is crazy! Will the recording of the gyrodata appear on the camera? Or do the AIO and camera not have built-in gyroscopes or accelerometers?

@mariofpv

4 ай бұрын

This Air Unit doesn’t have gyro but there are plans to add a gyro for future products. Cheers mate!😊🍻

Just got into the hobby with a 7 inch Lr, i think this will be perfect for it!!

@mariofpv

4 ай бұрын

It’s exactly what you need for long range flights! The range is unbeatable. Cheers mate!😊🍻

@sethwalmsley5287

4 ай бұрын

Yeah, I reckon openipc is currently really good for long range, I just can't wait until we can get the latency a little lower so it is better for freestyle.

@mariofpv

4 ай бұрын

Latency tests added to the video description.

Do you have any suggestions on gimbals that would pair with OpenIPC ? either 2 axis or 3 axis would be helpful!

@mariofpv

4 ай бұрын

Any cheap gimbal will work. Just 3D print a nice case and put all the electronics in. Then use that case as a regular action camera for your gimbal. Cheers mate!😊🍻

hi Mario I can see that right now that OpenIPC board only support h265 right now, how do think about supporting av1 down the line when hardware is abundant and cheap

@mariofpv

4 ай бұрын

OpenIPC supports h264 and h265. There are no plans to support AV1. Cheers mate!😊🍻

What if I want to have raspi on board for computer vision, how would that set up look like? Any tutorials to make use openipc with on board raspi? I assume openipc with work with any raspi cam?

@mariofpv

2 ай бұрын

We don’t support Raspberry Pi because they are outdated hardware with too slow GPU which results in high latency. They are not recommended for FPV. OpenIPC has 35ms low latency which is great for FPV flights. Cheers mate!😊🍻

As I see in aliexpress all camera modules are about 4x4mm size which is quite large for my quad to put on. Is there any option with smaller camera module similar to OpenIPC SSC338Q-IMX415 like in this video. Main board is OK but camera module should be small connected with cable. Any advices? Or should I wait for OpenIPC SSC338Q-IMX415 to be available for purchasing?

@mariofpv

4 ай бұрын

Yes, don’t buy those large Aliexpress cameras and wait for our custom AIO camera that is coming soon. Cheers mate!😊🍻

Its interesting looks better then analog but theres a weird jitter to it like the quad has a bad shake but it seems like its the video feed itself shaking around. any idea why it looks like that? also wondering about that latency test haven't seen it yet.

@mariofpv

4 ай бұрын

Yes that’s from the bad PIDs of INAV. We call it “jello”. The motors are vibrating and the FC jitters. It requires tuning which is not the topic of this video. There are plenty videos for tuning PIDs to learn more. Other than that the video is much better in reality compared to what you see in my KZread video. Cheers mate!😊🍻

@mariofpv

4 ай бұрын

Latency tests will be on my next video so make sure you subscribe to not miss it. 😊

Excellent Job! I can't wait to try, maybe we can push manufacturing.😀

@mariofpv

4 ай бұрын

Cheers mate!😊🍻

Good work, congrats ! Hope you can add osd for your next video

@mariofpv

4 ай бұрын

I added a minimalistic OSD for toothpicks yesterday. I’ll record a small video with my HDMI recorder and post it on my next video. Cheers mate!😊🍻

Would be cool to include some flying inside a house. That's the best use for such small quads )

@mariofpv

4 ай бұрын

Then my wife will kill me lol. I’m not a tiny whoop pilot mate. All these years I was flying long range 7” quadcopters with GPS and INAV. Now I need to learn how to fly 2” toothpick quads. Cheers mate!😊🍻

Freaking love my 2 inch I was gonna get this frame maybe I will try one out

@mariofpv

4 ай бұрын

This toothpick is so fun to fly! Well tuned out of the box! BF at its best! Cheers mate!😊🍻

Impressive.

@mariofpv

4 ай бұрын

Cheers mate!😊🍻

have you assembled a flight controller on the stm32 debugging board, does it make sense (I don't want to buy ready-made flight controllers)?

@mariofpv

4 ай бұрын

Personally I buy ready made flight controllers. Cheers mate!😊🍻

Hello, could you do a review of the new HGLRC Petrel 85Whoop

Very good!!!!🎉🎉🎉🎉

@mariofpv

4 ай бұрын

Cheers mate!😊🍻

HGLRC stickin their neck out again nice one! congrats

@mariofpv

4 ай бұрын

Cheers mate!😊🍻

@highwaltage

4 ай бұрын

When can I purchase a unit from you? Starting to get back into flying and want to look at non dji options😊

are you guys planning to make VRX for goggles like Cobra X V2 or a Universal one?

@mariofpv

4 ай бұрын

Maybe after we release the first camera. Cheers mate!😊🍻

Can you do some acro freestyle to demonstrate the latency?

@mariofpv

4 ай бұрын

I am not a pro freestyle pilot. Now that I have this toothpick I will start practising. I would do the same tricks and style of flights with an analog camera if that helps you understand my level as a pilot. Cheers mate!😊🍻

@mariofpv

4 ай бұрын

Here’s a better pilot than me: kzread.info/dash/bejne/Zp2GuLKQj7nXnso.htmlsi=tIymPrcTqygCGtiS

Do you have any interest in trimming this down to something that would fly on a 65mm tiny whoop? The FCs have 25.5mm mounting holes and the boards dimensions are not much larger. I could sponsor a whoop. Maybe a Meteor65 or Mobula6?

@mariofpv

4 ай бұрын

Yes, there is a new “whoop” version coming in the next months with a 14mm camera. We are targeting the tiny whoops because we have a lot of people interested. Cheers mate!😊🍻

@MaskedPixel

4 ай бұрын

:D:D:D:D@@mariofpv

Does the camera or vtx have a gyro? I will we be able yo run this through gyroflow?

@mariofpv

4 ай бұрын

No gyro on this Air Unit but there are plans for future products. Cheers mate!😊🍻

Another player on the market!! Definitely going to rattle some cages

@mariofpv

4 ай бұрын

Cheers mate!😊🍻

I want a few of them when can we get them?

@mariofpv

4 ай бұрын

If all goes well next month. Cheers mate!😊🍻

which camera and which board do you use?

@mariofpv

4 ай бұрын

Please read the video description. Everything you need to know is there with links to learn even more. Cheers mate!😊🍻

@michaelbehr4876

4 ай бұрын

Ja man, prost 😊

Maan! Congrats on your work. I have flown analog for quite a while and was thinking about going to Walksnail (the last versions seem way better than DJI - for me it's all about color and image). When I fly DJI it looks like I'm watching a video on my TV. Walksnail solved this problem. BUT, HOWEVER, NONETHELESS OpenIPC seems to be ELRS in the beginning. I'll wait a little more to go digital. The only thing I got about OpenIPC is from @14:17 to 15:25. At 14:17 it looks like there is a black wall and then many braches show up. Things like these can be tricky on freestyle. Anyway, I think OpenIPC is n the right track to become an alternative.

@mariofpv

4 ай бұрын

Almost every day we are updating and improving the firmware. The team is also growing because more people are joining us. People who are also developers and want to have an open source digital FPV system. Cheers mate!😊🍻

Need an Hdzero goggles module for OpenIPC :-) seems to be the best choice of goggles period, no?

@mariofpv

4 ай бұрын

Actually I’m planning to buy an HDZERO goggles because I believe these goggles are perfect for OpenIPC cameras. Cheers mate!😊🍻

@fredio54

4 ай бұрын

@@mariofpv I look forward to seeing what you do for a compact RX solution - it'd be GREAT if it hung off the module mount on the side like the analogue module I'll need for my first tinywhoop does :-)

When available need module for goggles.or a monitor how much they cost thank you

@mariofpv

3 ай бұрын

There are rumours that there will be goggles with 120Hz. Stay tuned. Cheers mate!😊🍻

what is the latency on this? 20ms, 30ms, 40ms, 50ms, 60

@mariofpv

4 ай бұрын

It’s variable and depends on what decoder and monitor or goggles you use. The lowest possible result is 25ms! Cheers mate!😊🍻

What do you watch it on?

@mariofpv

4 ай бұрын

Any goggles with HDMI IN port. Cheers mate!😊🍻

Wow esto es inteligencia nivel dios 🎉🎉

@mariofpv

4 ай бұрын

Cheers mate!😊🍻

this is whats up!

@mariofpv

4 ай бұрын

Cheers mate!😊🍻

glass to glass latency?

@mariofpv

4 ай бұрын

Check the video description. Cheers mate!😊🍻

This is awesome for whoops so far.

@mariofpv

4 ай бұрын

Yeap, it’s perfect for whoops. Cheers mate!😊🍻

How much latency? Camera to goggle screen pls

@mariofpv

4 ай бұрын

Latency tests added to the video description. Cheers mate!😊🍻

@Abhishek__Parihar

4 ай бұрын

@@mariofpv hey i clicked the latency test link, it is redirecting to your community tab, could you check those links again

@mariofpv

4 ай бұрын

That’s because you will find the latency tests there lol…

@Abhishek__Parihar

4 ай бұрын

@@mariofpv yeah i found it, didn't knew need to scroll down to 4 month old post 😂

Awesome, send me a quad I I gonna see if this thing rip LMAO. Good job !

@mariofpv

4 ай бұрын

I need to learn how to fly a Toothpick. They are so agile and tiny! Thank you for your support! 😊🙏

@electronicGRL

4 ай бұрын

@@mariofpv I love tiny toothpick because they are so discret and can freestyle like 5"

@mariofpv

4 ай бұрын

@electronicGRL also go inside trees and narrow gaps!

Love the OpenIPC!!! Drakenights arms are fragile.

@mariofpv

4 ай бұрын

I had many crashes with the Draknight and so far nothing happened to the frame. It feels very strong. Cheers mate!😊🍻

So close i call smell it. Drooools😮😮😮

@mariofpv

4 ай бұрын

Many people are drooling today. Thank you so much for your support!😊🙏

My buttcheeks were clenching when you were soldering/desoldering with the propellers still on. I know from plenty of experience how easy it is to accidentally brush up against something plastic with the barrel of the iron while concentrating on the work.

@mariofpv

4 ай бұрын

Imagine also keeping an eye on recording a KZread video that will be seen by thousands… hahaha. I guess you are right I should have taken the props off. Cheers mate!😊🍻

@divingfalconfpv4602

4 ай бұрын

Haha I just melted a prop a lil the other day haha

Where can I buy this?

@mariofpv

4 ай бұрын

It will be available in March if all goes well. Pre-orders will start soon. Cheers mate!😊🍻

Maybe you‘ll alsl get some decent screw drivers 😄

@mariofpv

4 ай бұрын

lol cheers mate!😊🍻

Need todo proper range test can't fly far lol so.put on land vehicle rc car can go as far as you want no restriction in rc car hobby yet

@mariofpv

4 ай бұрын

Actually I’m planning to build an RC car with OpenIPC! Cheers mate!😊🍻

Can I ask what goggles are compatible with this please?

@mariofpv

4 ай бұрын

Any goggles with HDMI input port will work. I recommend HDZERO goggles for low latency. Cheers mate!😊🍻

@Kleinage

4 ай бұрын

@@mariofpvwould DJI V2 goggles rooted with Butter be a good option?

@blw0rm

4 ай бұрын

@@Kleinage What rooting DJI V2 would give you?

@mariofpv

4 ай бұрын

@blw0rm you can use it as 120fps goggles plugged on a laptop to decode h264 OpenIPC video feed.

@blw0rm

4 ай бұрын

@@mariofpv Mario, Are you talking about the Moonlight streaming?

Will schematics be available for the air unit? Would love to design my own PCB for it. Keep up the good work man!

@mariofpv

4 ай бұрын

That will depend on how the cameras will sell in the first few months. Cheers mate!😊🍻

@dooddrones6521

4 ай бұрын

@@mariofpv Gotcha. Let me know