WORKPRO 12V Cordless Rotary Tool
Тәжірибелік нұсқаулар және стиль
WORKPRO 12V Cordless Rotary Tool amzn.to/32twkWd
Follow me on Amazon www.amazon.com/shop/ToolsElec... (Daily Live stream)
Instagram / toolselectrodiy
As an Amazon Associate I earn from qualifying purchases.
#WORKPRO #RotaryTool #12V #Cordless
Пікірлер: 54
WORKPRO 12V Cordless Rotary Tool amzn.to/32twkWd Follow me on Amazon www.amazon.com/shop/ToolsElectroDIY/ (Daily Live stream) Instagram instagram.com/ToolsElectroDIY/ As an Amazon Associate I earn from qualifying purchases.
Thanks! I've never used a rotary tool and bought this model. When it arrived, I realized I had no idea how to use it. Now I feel more comfortable after watching your video!
@ToolsElectroDIY
2 жыл бұрын
Glad I could help! Smash the LIKE button and it will help my channel, thanks!
Can anyone , testify that this tool work good and has used it for a length of time and it’s worth
@ToolsElectroDIY
Жыл бұрын
still works for me.
@jerzyszczepanski2518
2 ай бұрын
Hi. It works great. It's also compatible with Parkside (Lidl) 12V batteries 2Ah and 4Ah. Unfortunatelly Dremel Collets and Nut won't fit this spindle.
Helpful to me. Thanks. 👍
@ToolsElectroDIY
4 ай бұрын
Glad it helped
I just used a cutting wheel for the first time and it cracked mid cut which could’ve injured me. Do you think it was because I didn’t put that red washer on both sides?? I think I had both on the same side. Also, do Dremel tools fit inside this? Thx u
@ToolsElectroDIY
4 ай бұрын
Please use protective eye goggles
Oh wow that's awesome
@ToolsElectroDIY
2 жыл бұрын
Which part do you like the most?
thanks for sharing. I need to cut a slit on top of a stripped screw so I can unscrew it with a flat-top screwdriver Will this do the job? thanks
@ToolsElectroDIY
Жыл бұрын
Yes, with the right bade / disc, it will cut through screws.
@spaghettirus1229
Жыл бұрын
@@ToolsElectroDIY thank u .
How long does the battery last. I noticed it goes from full 3 bars to 2 within a few minutes?.
@ToolsElectroDIY
2 жыл бұрын
It probably was not fully charged when I made this video. I never had any issue with battery life. Never fully depleted the battery.
Hey, can i use a drill bit in that ? Thanks. Marc.
@ToolsElectroDIY
Жыл бұрын
Yes you can. There are rotary drill bits accessories.
Can you add a key less chuck to this model?
@ToolsElectroDIY
Жыл бұрын
Not sure.
Question : is it normal for the charger to always be green even without the battery in it - I haven't used the product much yet however its been a few months -- I cannot tell if it 's charging as the charger is always green regardless if a battery is in it or not - * I see at the end of your video that it was green until you inserted the battery - the tool says it's full - I guess I need to use it more - and when it needs a charge it will turn red on the charger? - that's strange however I guess if that is how it works that makes me feel better now at least
@ToolsElectroDIY
10 күн бұрын
Sorry I couldn’t find it in the garage to check that for you
@drumsofspace
10 күн бұрын
@@ToolsElectroDIYthanks anyways and for replying -- and like I said the last minute or two of your video did show that anyways so that was awesome!
Good afternoon. Please tell me which batteries are suitable for this tool. Thank you
@ToolsElectroDIY
Жыл бұрын
The rechargeable battery is included.
@jerzyszczepanski2518
2 ай бұрын
It's compatible with Parkside (Lidl) 12V batteries 2Ah and 4Ah.
No quick change collet!😮 Have to used the supply wrench each time to switch out each accessory!😂
@ToolsElectroDIY
9 ай бұрын
sounds good!
@modenajon
4 ай бұрын
Literally takes 5 seconds.
@jerzyszczepanski2518
2 ай бұрын
Quick change collet would limit you to one diameter of attachements.
Скажите, как работает на протяжении этого времени Какая мощность в ватт?
@ToolsElectroDIY
Жыл бұрын
7.4v I think
@ChasRibaka
Жыл бұрын
@@ToolsElectroDIY Как она ещё работает ? Стоит покупать ?
Would you say it’s worth buying
@ToolsElectroDIY
Жыл бұрын
yes
@julianphilp
Жыл бұрын
@@ToolsElectroDIY will it cut a screw
@jthizzle4013
Жыл бұрын
I just bought one about 2 weeks ago and I'm more than happy so far. IMO, a must-buy if you're a DIY'er
It's compatible with Parkside (Lidl) 12V batteries 2Ah and 4Ah. Unfortunatelly Dremel Collets and Nut won't fit this spindle.
@ToolsElectroDIY
2 ай бұрын
no idea
@jerzyszczepanski2518
2 ай бұрын
@@ToolsElectroDIY Hi. It wasn't a question. Just some more info about this Tool for others. Thanks.
Where do you buy the replacement batteries. So many seller never sell the batteries only
@ToolsElectroDIY
Жыл бұрын
On Amazon
@jerzyszczepanski2518
2 ай бұрын
It's compatible with Parkside (Lidl) 12V batteries 2Ah and 4Ah.
First
@ToolsElectroDIY
2 жыл бұрын
you made it!
@WORK-HARD.PH.99
2 жыл бұрын
Aw man!
Thank you the instructions on it are absolutely horrible
@ToolsElectroDIY
6 ай бұрын
My pleasure!
Excellent review. I'm undecided between this 12V Workpro and the Dremel 8250 cordless which costs 3 times as much but it's a Dremel. The negative reviews on the Workpro tend to be about it's very poor longevity. According to these negative reviews the Workpro tends to break to the point of being useless after only a few uses. Better get the extended warranty offered by Amazon, huh.
@ToolsElectroDIY
Жыл бұрын
Thanks for watching! It still works great for me. Go for it!
brushless motor?
@ToolsElectroDIY
Жыл бұрын
no idea
@jerzyszczepanski2518
2 ай бұрын
No. It's brushed