Using the knife was a nice touch.😀

@AFHProjects

4 ай бұрын

It's a special tool for get the air going 😀

@DonnDIY

4 ай бұрын

😂​@@AFHProjects

Nice working machine 👍

@AFHProjects

4 ай бұрын

It works relatively good. Thanks for watching!

Interesting to threated the throttle with the knife and I saw a tall person with a couple of smaller ones watching. Bet you did too. Somee will make nice saw logs but you will probably sell the rest to the wood outfit. Thanks, stay warm and CHEERS!

@AFHProjects

4 ай бұрын

It was actually the air bleeder or how to call it. The air pressure starts to build up when you pull this and hold a little time. After that, the lever stays up as long as the air pressure is up. Yeah, I had some eyes on me :D We don't sell, I have some sawmilling to do in summer time :P Thanks for watching and commenting, Lewie! Take care! Cheers!

@lewiemcneely9143

4 ай бұрын

You'll have plenty good stuff to saw for sure. The bleeder might be like a park brake? I've never been around these but the ones here were computer controled as far as cutting to length and the programs were XP, the easiest and probably best operating systems but said tat we had to go to 10 which is mostly a joke.They are a trick to do all they do. Now all you need is to haul them out.Thanks, Pal and yall have a Wonderful weekend and CHEERS too!@@AFHProjects

@AFHProjects

4 ай бұрын

Lots of trees have started to rot and will be used for firewood. Yeah, the brakes as well. It has air and oil brakes. Like some trucks. It has an old type of computer, no windows or anything. Thanks, you too! Cheers

@lewiemcneely9143

4 ай бұрын

Lots of great firewood, no doubt.Bet it's an interesting thing to run. Looks like you need all your stuff because you sure can use it. Good older stuff too. CHEERS to you all!@@AFHProjects

@AFHProjects

4 ай бұрын

Yeah, Cool stuff, but it's not actually mine. I have just access to all these machines. Free to use, of course, need to take care of them and keep them maintained. Thanks again Lewie! Cheers!

Very good well done. 👍

@AFHProjects

4 ай бұрын

Thanks!

Hi you are improving and dead stuff is never easy you should spend a little time watching an experienced operator. I would set work revs on the base machine while you are harvestin makes for constant hydrauilic flow and easier operation. The old girl is doing well

@AFHProjects

4 ай бұрын

Thanks a lot! I have tried to work with working revs constantly but this machine is not so smooth to operate then and I'm not so professional either, so I find that holding revs with the foot pedal is much more efficient for me. I can hold up the revs when processing the log and lower the revs when catching the new log. Thanks for watching and constructive comment! Cheers!

@lewiemcneely9143

4 ай бұрын

You do FINE! And it's your machine. @@AFHProjects