Working garbage compactor truck miniature model Schörling Leach 2R
Ойын-сауық
making of: www.classicrefusetrucks.com/co...
This is my 2R garbage truck miniature build from aluminum and steel. I admit it looks a lot like Dickau's project, but actually I started it before I heard of his. It is operated by a 12V battery and has a button control panel like the original truck. There is no ejector panel or wheels because I wanted a small compactor I can use on the dinner table or in bedroom :) The hydraulic force is 88 kg for each function (sweep/slide). The body is emptied by sliding the rear wall aside. In this video, it will eat cardboard, candles, a weird paper toy and plywood. Please write a comment if you have any questions.
Müllabfuhr Müllwagen Modell 1:11 aus Aluminium
Schörling 2R Sperrmüll Fahrzeug
Пікірлер: 91
Terriffic construction work there, I really admire the people who make these working models of rear loaders... all the detail and work that gets put into them. I absolutely love it, it goes slow, but doesn't stop it from being awesome!!!
You are not alone,I always wanted something like this to clean out my ashtray :D
Nice compactor indeed. I'd also like to see a minature Rotopress in action.
From the description, my guess would be it breaks it with 88 kilos of force, then rips the broken digit from your hand with a further 88 kilos of force. Hydraulics are NOT to be messed around with.
please chuck some dollhouse furnature inside of that beast, maybe a doll or small stuffed animal too
Nice! I want one!
I like that now i want one!
Ok! So both the cylinders and the valves are custom? Normally leimbach valves operates at 10bar. Do you know how many bar yours operate at? I am well on the way of building a metal refuse truck of my own and It would be very nice to get some more power out of it!
What kind of hydraulics are you using? 88kg is way more than for example leimbach hydraulics can handle!
Ohhhhh the memories
@MasonsHockeyWorld
3 жыл бұрын
IKR
good for an iphone challenge! in stead of 'will it blend', ' will it crush'. 😆
I have a small panel with button controls, it was made from a servo control for RC models. This operates the control valve inside the truck.
Where can I get one of these?
Sieht wirklich echt gut aus und funktioniert auch noch :-D Saubere Arbeit, weiter so! Greetz FaTu
Could you possibly make a video of it crushing a few diapers filled with water
nothin escapes a leach ! not even in minature !
genial
@MrMalzahn ich hab auch einen aber aus lego gebaut mit den ganze pneumatik zylindern undso da funktioneirt auch allles alleine halt nur pneumatisch . der drücker ist voll fuktionsfähig, die klapppe geht pneumatisch auf und ne pneumatische schubwannd ist auch drinne: auch allles eigenbau aber hat leider nicht so viel presskraft wie deiner hier aber sehr schönes modell
God Bless America
dont you know never stick your fingers into an open hole
If I wanted to make something close to this or any RC truck, what type of tools I would need and plus materials?
Whee can I get one of these things?
how did you build it
where did you buy the pump and the pistons?
how do you countrol the packer?
wo haste den her ??
Ya need to get those flashers workin'! Someone could plow right into the back of the thing while you are loading, dammit! And get your gloves and hard hat on!
wie viel kraft hat der eig
where can i get one
please check the report linked in the video description for further information
sorry, this one is not for sale. I would build another one, but I think it is way too expensive.
what are the materials to make this thing? and how did you do this?
cool! da nicht den finger reinhalten :P
Kann man so ein Model auch erwerben und wieviel kostet es?
please check the report I made linked in the video description
GENAU, STECKDOCH MAL DEINE FINGER REIN!!!
MrMalzahn hast davon Baupläne die du öffentlich machen würdest.
cool und dan mit hamburger KFZ kenzeichen
Where did you buy it? ;-)
Which control for hydraulic use for it?
@brandonebangelistavalentin4265
7 жыл бұрын
Michael H f
What happends if you put your finger in there ? And are you selling any of these?
I want one.
where did u get it from i want 1 to i was watching taht 1 for 1 year since that i try to get 1 please send the internet site in link please i begin you
@matthewtchernev123 sorry guys, not for sale
for sale? how much?
could this crush say a sneaker?
@123jefm I don't know about your budget, but the materials alone are worth a few thousand dollars without man hours. But I will help you if you want to make your own one.
Can i buy
Settings - Speed - 2 - change video.....
@didiwright3773
7 жыл бұрын
typerat
just posted a new video in my channel where you see tins being compacted
@MrMalzahn da darf mann aber nicht den finger zwischen haben :OO haha geil ich will auch son ding haben genial ist das wie viel kosten hatte das matrial für den bau?
its takes so long i needs the power
@MrMalzahn muss erstmal machen und so aber könnte ich tuhen
I want one
Lucas
What I need to built that??:)
@laurin4339
4 жыл бұрын
Ali M It is not. I is homemade and one of a kind.
kanste mir auchma einen bauen
will ich haben
@basch852 Ein paar tausend waren es.
men tu basurero no tiene llantas xdxdxdxd
ほしいな
hey hast du noch paupläne dafür? Gruß Bane852
Could you make me one? I would be willing to pay as much as you want! This is SSSSSSSSOOOOOOOO NEAT!!!!!!! I would REALLY love to have one of these! I would just want one like this and then I would put teh chasis on. I just don't know ho to make the body and hidrolics. Or could you send me a message telling me the instructions?
can you do a video of it ejecting the material
@basch852 Lade doch mal ein Video von deinem hoch.
throw in a mob rat ? try a dead mouse :P
@basch852hab dir mal ne narichts gesendet kannst ja mal den link anklicken
@Gloomshadow I talked to Mr. Leimbach, he was very helpful, and we decided to set the pressure to 15 bar. Which truck do you want to build?
I need something larger, for my mother in law...
that is true. you empty it by opening the rear wall.
@Gloomshadow They are custom made by Leimbach. Additionally, I raised the operating pressure of the pump.
@jan50521 ca 80 kg presskraft
lo vende
muito daora
@arthur_0082
6 жыл бұрын
isac sales sim
@arthur_0082
6 жыл бұрын
Nois 2 brasileiro hehe
Hi:) Where can I get this powerfull electroengine and the cylinder??:)
B/
@jan50521 Eigenbau
@MrMalzahn i would like to buy this how much?
es de fierro por que no me gusta para nada xdxdxdxdxdxdxd
@Cirbonukleon It comes every two weeks, why you do´t it? (Make a vid)
Good for destroy dinky - toys !!!
Y IT SO SLO
horrible song 📣📣🙉