Area 51 guards when they see Captain Xavier running towards the base:

@lauradarkez

5 жыл бұрын

That gives me an idea for a nerf war. If your group can do it, find a fenced in "base" that can serve as a fake area 51, and basically do an inverted hvz, where the humans are trying to contain the aliens, the aliens are trying to find their weapons and get to a "launch pad" where the "ufo" is waiting for them to make a great escape

@erycdamaso_613

5 жыл бұрын

*Insert Merder face*

@Ragnarock227

5 жыл бұрын

@@lauradarkez or the Area 51 "guards" Have to hold off the siege of the base. Id play either game mode lol

@compositebow151

4 жыл бұрын

You mean iran during world war 3

As for the new setup, we the viewer are looking at the blaster upside down, and far away as you work. Just saying.... however, thank you Captain for the fresh look at such a cool blaster! Bangarang!

@CaptainXavier

5 жыл бұрын

I agree. In the future the build part will be top down and the showing it off portion with be from the front

@andrewharvey1777

5 жыл бұрын

Mate, it was built for Aussies

Wow I like the clear body it makes it stand out and you can see all the inner workings

@pyschohippymofo

5 жыл бұрын

Pity you can't show off a nice trigger or sled if they're not made by Worker.

Things that sound dirty that really is not. I just watched a video of Capt X Lubing his plunger rod

Its a nice angle but I think I perfer the original one because then we're almost seeing exactly what you're seeing which could save some confusion for others, anyways great video as always

What a surprise, it wasn't the built in scar that caused Drac's FPS issues.

@Montisaquadeis

5 жыл бұрын

If you look the captain has added it to his so it may very well be the cause of the inconsistent FPS readings. Also we don't know what spring the captain added to his either.

@CaptainXavier

5 жыл бұрын

I suspect it was the o-ring I added to the bolt at around the 6:15 mark. I only barely noticed it in the instructions.

@matthewyoho5422

5 жыл бұрын

@@CaptainXavier It was more likely a misaligned barrel - he was missing one of the hex screws for the barrel connector for some reason.

@pyschohippymofo

5 жыл бұрын

@@CaptainXavier He installed that O-ring. My guess is the misaligned dart gate and pusher O-ring.

@CaptainXavier

5 жыл бұрын

@@pyschohippymofo yeah, I talked to him about it. We are both baffled. He still suspects the scar barrel. Which it could very well be.

Captain Xavier, you are right on painting it orange with black stripes because there is a bullpup shotgun with 2 magtubes that looks about 80% of what this looks like.

Captain Great video. Love watching you work. I think I would prefer the old angle but this one work just fine too. I am not sure if it is me but you sound distant in this video. Keep up the great work.

Either setup is good. It's whatever you feel comfortable with

Cool video cap! Can't wait to catch you at afterworlds!

I love the AEG on this, kinda think it would be a cool addition on my way to finding AEG perfection for my springer/pump blasters.

Loving the angle, man

didnt get a chance to comment on the makerspace video, but I love the orange and black colors you have going on for the walls.

Liking the new angle of dangle dude.

🔥 It’s painted Clear.♥️

It won't fit any trigger but worker's without shell cutting. If you want to use the internal prime you're stuck with the worker sled or drilling holes in other sleds. I've read that the dart gate area needs cutting to fit some things as well. There is also the issue of them finally putting a sling mount on one of their shells only to have it be completely useless without modding.

It's interesting how people are having issues with this shell for both higher spring loads and performance in general. You mentioned getting a bad angle on the pump grip causing some friction in the action and iirc that's what others seem to have said too. Seems that one of the grips they released for the shell does a better job of keeping stuff aligned with less sticking. Imo kinda annoying that a shell that costs as much as the Terminator does runs into the issues that it does.

@CaptainXavier

5 жыл бұрын

Right? The offset prime is a dubious choice for something with this heavy a spring load.

@donutcat0

5 жыл бұрын

@@CaptainXavier And it only gets worse for those pushing the super high loads. On the note of the barrel with the Scar: I'm using that same barrel in my XPT Retalicon build. Compared to the orange barrel that comes with the XPT and Worker's plastic Scar, that barrel is getting about 10fps less on avg, which is a less than 5% difference at 215-225fps. Of note is that the effective length of the barrel itself is around 242mm or 8mm less than the orange barrel, so that lack of length could somewhat contribute to somewhat lower performance alongside the stringed Scar being less consistent than the molded one.

amazing! i want one!!!!

This is like figuring out how to put together IKEA furniture for the first time 3:59

Im hoping we get a Worker Rapidstrike next and a select fire kit to go with

@CaptainXavier

5 жыл бұрын

Same

Captain you gave this blaster life drac did a video built and review and was only hitting around 120 when he got his completed and only got a couple shots in the 170 range keep up the great work Captain

@CaptainXavier

5 жыл бұрын

I would be willing to bet he forgot the o-ring around the base of the bolt, but I have not watched his video.

@Montisaquadeis

5 жыл бұрын

Yeah drac didn't put it at the base of the bolt but in another spot instead which would explain things as his seal isn't as great as the captains.

@matthewyoho5422

5 жыл бұрын

@@Montisaquadeis Leaving that particular o-ring out doesn't explain the sizeable performance gap between those two builds: I've assembled a Longshot with those same Worker internals without that o-ring installed (because the instructions revealing one should go there were not yet a thing that existed at the time), and having since put it in after the fact once I built a Terminator and discovered Worker wants us to put an o-ring there, I can tell you that it made very little difference either way. Something else was amiss with Drac's setup.

@RastaBot

5 жыл бұрын

@@matthewyoho5422 I agree, I have that Worker kit in my LS, I did not put that o-ring on and it performed fine, its shooting around 220 - 230's. Then I tried that o-ring on the pusher base and started to vacuum load, but still shot above 200fps so i took it out. It does take a lot of tuning to get to shoot good though.

@pyschohippymofo

5 жыл бұрын

@@Montisaquadeis He did put an O-ring at the base of the bolt. He even commented that he thought it was plunger padding rather than to improve the seal.

You forgot the Prophecy which is their Retaliator/Recon shell. Interesting blaster, might be something I'll pick up after I finish work with turning a Swordfish into a Colonial Marines Pulse Rifle. Thinking of using either a Kronos or a Sentry X-2 as the grenade launcher since the Magnus isn't easy to find around me.

The angle seemed ok, but we can't always see what you can see. O realise that over 'the shoulder' cam can get in the way though. Nice looking shell, but very expensive compared to a thrifted longshot...

In my opinion this camera angle is not bad, but I'd say the straight down angle is better because the blaster, and what is being done to it, is noticeably more visible. Also there is not a hole lot more stuff visible because of the angled shot so there is no real advantage, but do as You please. Nice video by the way :)

The angle is good

Ok there is a huge amount of room in the stock for some batteries so you could run orange LEDs and still paint the blaster just leave sections clear for the lights !!!

It's painted clear!

the x zeus 2 plus an alpha ls kit costs 130 plus shipping and can hit 200 fps with ease

I bet some of the horn blasts in the background were people rigging train horns to cars

I want to get one and make it volt action for it to look like a sniper rifle

I think the angle of the camera looks ok.

You should dye one clear orange with black stripes. Lets get those higher powered roulds set up so you can snipe with all your worker builds lol Also a longer monkee mods barrel would probably increase fps and make it more consistent with more efficient air flow

how is the plastic quality of this in comparison to say an Xzeus 2 or Ceda S / Gameface Prime etc the better plastic shells out there how does this compare? thx

I like the new angle, but then I am shameless fan of the Captain. XD

I feel like this is a better camera setup. Seems like you have a better view of the work space. Only complaint is the small bussing sound. Sounds like an AC is running in the background.

@CaptainXavier

5 жыл бұрын

It is a fan. It was hot here right now.

Awesome video as always, and just a quick question cap, for 3d printed half dart mags, would you recommend the Vorpals? (If you mentioned something like this later in the vid I apologize, I'm only half way through so far). Bangarang!

@CaptainXavier

5 жыл бұрын

I have not tried printing a mag yet and the only ones I have are Pecker mags so I have no data to give you, sorry.

Trains - I dont think you need to pause when you hear one. You come across just fine (the trrain aint got nuttin on your command voice (grin)). Cool episode. Thank you for sharing.

5:28 That happens to me all the time! I swear my blasters are out for blood..........

Just FYI, I no longer see complete Terminators for sale at NFStrike. Is there any point to finding an updated, alternate link?

@CaptainXavier

3 жыл бұрын

I believe NF-Strike has quit selling Nerf (or is awning to) I have no idea if there is another source for these. WprkerKit.com maybe?

I ordered the Terminator shell and an Omega kit the day the Terminator launched. Was super disappointed that it HAS to be used with all worker parts. So I went back to Nfstrike for the parts, almost 2 months later it's still processing and multiple emails and refund requests have all gone unanswered. I also had 3 screw posts, all 3 along the top rail, broken off out of the box. So I'm sitting on a $100 shell, with $160 in parts that I'll never see or see my f'ing money again

@whatstdiggn

4 жыл бұрын

Nfstrike is the worst. I make sure I always use PayPal. If you used it go through them for the refund. I've had issues with 7 out of 9 orders from nfstrike. They can send free stuff to yiutube channels but don't give a shit abut paying customers. Conversely I've never had an isue with banggood

Hm would one of the electronic priming systems walcom showed off work with this with some shell modification?

@CaptainXavier

5 жыл бұрын

It would take a lot of shell modification, but probably.

I like the new filming angle, are you going to dye the shell Orange so it stays translucent or use paint? What are your thoughts on the Dart Zone Pro Mk1, will you be doing a review any time soon?

@CaptainXavier

5 жыл бұрын

Probably not? I am not a fan of transparent shells. I will probably dye it black and then paint over most of it in Orange. I might...might...do the base in a translucent black though...

With the 45 degree angle camera you lose profile of blasters when you pick them up? That is the camera only sees the top of the blaster. Not sure if this is clear enough feed back.

@CaptainXavier

5 жыл бұрын

Perfectly clear. Feed back has been very split, oddly. I think I will not back to the top down for builds but stick to the angle for showing off, see how that works.

The angle looks really good, but i only have a problem with the audio, since you are further away, it sounded very washed out and a lot quieter than usual

I prefer the straight down angle

So I've got to ask. Does the kit as purchased allow for full length darts or is it half darts only? Also between this and the worker caliburn which would you recommend?

@Ixs4i

5 жыл бұрын

cant say for the latter question cause im not qualified but i can tell you that it does in fact accept full length mags, the half length mags are used with katana/talon adapters which fit into full length magwells

@matthewyoho5422

5 жыл бұрын

The kit as you saw here is half-dart only: the Terminator itself can fit standard size magazines or Talons/Katanas with an adapter, but standard size magazines that hold standard size darts (which is not what Xavier was using, those were the short dart versions of that 10-round slanted "sniper" mags that Worker makes) are incompatible with those internals - the pusher breech overhangs the back of a full-length magazine well so a full-length dart doesn't get the necessary clearance to get up and in front of the pusher, the breech will just constantly hold the top-most dart in the magazine down and slide back and forth on top of it. The only way you're firing full-length darts with pretty much any pusher breech setup like this one is if you manually insert them into the barrel by hand.

So I think I wanna try to paint my next clear bodied blaster on the inside surface instead of the obvious outside. Thoughts folks?

@CaptainXavier

3 жыл бұрын

You run the risk of a layer of paint messing with the internals and the internal moving parts scraping of the paint.

The camera angle looks better

Captain Xavier: Shows up with his full loadout The Area 51 guards: 🗿

I have a question not related to this video but i thought it may be good for Friday Q&A. In your opinion what is a good mag pouch/holder for 12 round Rival mags that aren't 3d printed?

@CaptainXavier

5 жыл бұрын

If you want your question answered for Q&A you have to comment it on the previous Q&A. I pull the questions from there. But to answer your question, anything designed for AK mags works best.

@Jakk3113

5 жыл бұрын

@@CaptainXavier Ak pouches for tube shaped Rival mags? I know they work great for standard Nerf mags. Thanks for your answer Captain and Bangarang!

@CaptainXavier

5 жыл бұрын

Oops, missed that part. Most pistol mag holders work for Rival mags.

@cooldude-ky4ni

4 жыл бұрын

On the off chance your still interested in getting pouches, 5.56 pouches hold 2 pretty nicely.

And the prophecy is just like a retaliator/recon.

@CaptainXavier

5 жыл бұрын

Oh yeah! Forgot all about that one!

so, funny story, I built my Worker terminator today, and after about 12 shots, the plunger rod popped off the plunger. Snapped clean right behind the head.

@pyschohippymofo

5 жыл бұрын

Was that using worker's plunger rod and metal head?

@onaux4611

5 жыл бұрын

yep, its the exact same one in the review. I just spent the better part of tonight trying to put an omega kit in the terminator shell, unfortunately the catch for the omega kit has to be centered and there's a gap in the shell right where the spring needs to go. Going to try to re-enforce the worker plunger tube by running a bolt thru the center. @@pyschohippymofo

noice

If worker decides to injection mold a high powered pistol, which platform do you think they would "clone"?

@jetstreamlynn3156

5 жыл бұрын

I honestly see them making hammershots or strongarms

@endrlock

5 жыл бұрын

Nite finder most likely

@CaptainXavier

5 жыл бұрын

I would love a high performance hammer primed blaster with a decent capacity.

@Montisaquadeis

5 жыл бұрын

8-10 shot high powered hammer primed would be great

@CaptainXavier

5 жыл бұрын

@@Montisaquadeisyeah yeah. I would go with 7 or 9. Odd numbered cylinders are easier to reload. And much more than 9 and the blaster with start getting bulk and harder to holster.

Im not a big fan of transparent blasters. The internals seem very solid. Would like to know what distance you can get with that blaster. I Like your dart storage setup! Regarding your camera setup. I think you have a larger display area for your vids which is cool but we the viewers are now seeing everything upside down which is not cool. I think I prefer the top down view you had before.

@pyschohippymofo

5 жыл бұрын

200fps would give you a max range of maybe 50-60m and an effective range of 30-40m depending on how accurate the build is.

Why won’t my pump block go on flush?

@CaptainXavier

4 жыл бұрын

How should I know?...

How are the rest of the makerspace moving along?

@CaptainXavier

3 жыл бұрын

Still have wiring and lighting to deal with. And the leaks in the roof. But it is mostly done now.

Oh captain my captain, are you planning on trying higher spring loads?

@CaptainXavier

5 жыл бұрын

Probably not. I have no need to exceed 200fps and I would not trust that priming mech.

@TectalBeanNerf

5 жыл бұрын

Understandable but maybe just for testing. Because of right now people have only been able to push it up to a 16kg turf. Also the spring that worker includes isn’t a 18 it’s more like 13.

How could I make a nerf Falconfire shoot half darts?

@CaptainXavier

5 жыл бұрын

The cheap option? Take out the AR. Load with half darts. Harder option? Full brass breach but it does not work well. Expensive option? SPAMF kit.

@kylejoneshorn9125

5 жыл бұрын

Thanks!

Without the built-in SCAR, it looks like a T'au Pulse Rifle.

@CaptainXavier

5 жыл бұрын

Very true!

@thetribunaloftheimaginatio5247

5 жыл бұрын

@@CaptainXavier Just needs a priming-handle that isn't that goofy swept-back thing. Something more like a Deploy or a Roughcut or a Vagabond, ya know?

@haydenallenallen1160

5 жыл бұрын

Special rule for this blaster is anybody wielding it cannot use a melee weapon

Hi

👍

Angle is good, but the audio is a bit low.

@CaptainXavier

5 жыл бұрын

...so turn up your volume? ;P but seriously, I turned down the sound because people complained it was too high, now it is too low...I will find the happy middle eventually!

Hey captan Xavier will you ever do a ww2 build

@CaptainXavier

5 жыл бұрын

Maybe?

But can it take a k26

@CaptainXavier

5 жыл бұрын

Yes, but it would be a downgrade from the spring it came with.

@pyschohippymofo

5 жыл бұрын

@@CaptainXavier TBH I don't think it's much of a downgrade. The worker 18kg isn't even close to 18kg.

Do you have it painted and optic added yet?!? 😁

@CaptainXavier

5 жыл бұрын

...I filmed this last night so...no.

@jeffwilkins3052

5 жыл бұрын

@@CaptainXavier , I knew that.......I was being facetious. 😁😁😁😁😁 Can't wait to see her all painted up! 👍🏼😎

You look like a guest on your own show AND a disadvantage of working upside down.

It looks like a walcom video

You should dye it.

i can't say much about the Terminator other than it's here to terminate the competition

As Cool as this thing is, it kinda feels (and other kits like it) like microtransactions in a video game. "Why work for the best thing when you can just drop some money and buy the best thing out the gate" The kits, like the Swordfish where you customize everything are different in my eyes as it's a custom build. Something about it just feels... Wrong to me. Maybe I'm the only one, but that's how I feel.

Call me a traditionalist but I like it the original review

Who can i get to print a caliburn for me?

@CaptainXavier

5 жыл бұрын

Well...Captain Slug...you know...the guy who invented and makes them...

@ciaranodubhgain4291

5 жыл бұрын

@@CaptainXavier I know that ( not trying to be mean) but I used his caliburn configuration website and I can't send it to him. Also on his etsy there is no option of a disassembled caliburn only hardware or fully asembelled ones and that's too expensive and I don't have a 3d printers and the captain does not ship to ireland

@CaptainXavier

5 жыл бұрын

See, those are all details you really should have included in your initial comment. I don't know anyone with printers who prints Caliburns and ships to Ireland. Have you tried asking on the Auxiliary board? I know there are Aux in the UK.

@ciaranodubhgain4291

5 жыл бұрын

@@CaptainXavier sound out. Love you videos sorry if I aggravated you.

@CaptainXavier

5 жыл бұрын

@@ciaranodubhgain4291 not at all, sorry for the snark in my first reply.

I like trains trains trains trains trains!

Instead of opaque colors you could try tinting it, I saw RMods74 build a Terminator on Instagram ( instagram.com/p/B0oBA3qh8Mc/?igshid=q3une92tyay8 ) and they used Duplicolor Metalcast to tint it red. And they just so happen to have Metalcast in orange! Might be something different to try.

Dammit I should not be watching Terminator videos when Im trying not to buy one....its sitting in a cart somewhere on the internet but cant seem to hit the check out button hehehe...The Sith in me says "Do it" but the old Jedi in me says "Let go".

@pyschohippymofo

5 жыл бұрын

Don't join the dark side, at least not for this crappy shell.

@RastaBot

5 жыл бұрын

@@pyschohippymofo haha i like how it looks but yeah the quality has me worried, some people broke some screw posts already.

@CaptainXavier

5 жыл бұрын

Mine came with 3 broken screw posts so...

@RastaBot

5 жыл бұрын

@@CaptainXavier Yikes I thought it was only one. At least you got it shooting well.

Angle is better.

400th like

😂😂😂😂😂Train

I think the view looks worse but that's just me.

GET A BODY MIC

@CaptainXavier

5 жыл бұрын

STOP YELLING. IT IS RUDE. ALSO RATHER THAN JUST COMPLAIN GIVE A REASON. I MOVE AROUND TOO MUCH FOR A WIRED BODY MIC AND MY SHOP SEEMS TO HAVE TOO MUCH LATENT INTERFERENCE FOR WIFI.

@blackdusk6581

5 жыл бұрын

@@CaptainXavier Bluetooth? Does that work? And you need one so you don't have to yell constantly

Its looks really impractical and uncomfortable. Smooth is not a word I would use with this. The gimmick transparency makes it janky looking my opinion.

@CaptainXavier

4 жыл бұрын

Then I highly recommend not getting...