Work Turbochargers TA-60 1986-7 Buick Grand National/Turbo-T/GNX and 89 Turbo Trans Am Upgrade
Автокөліктер мен көлік құралдары
In this video I will be going over the features of our WORK TA-60 Buick Turbocharger Upgrade. This turbo is available for purchase on our website: www.workturbochargers.com/wor...
Be sure to check out our Instagram and Facebook! @workturbo on both platforms!
Have a question? Drop it in the comments below or give us a ring: 205-874-6608 or email support@workturbochargers.com
Thank you! Reed
#workturbo #workturbochargers #buickgrandnational #turbobuick #turbobuicks #buickttype #buickgnx #turbotransam #turboupgrade
Пікірлер: 14
I had a TE-60 on my Buick and it sounded like a Leer jet driving down the road. It was so cool with straight pipes and an .82 housing. I recently replaced with a Precision 6262 but this one is so quiet. Is there a reason for that? Blade design etc.? Thanks in advance. great channel
@workturbo
24 күн бұрын
Most of the time more efficient compressor/turbine wheels will make less noise, the good old 60-1 has great airflow at lower shaft speeds, but it is horribly inefficient...and the T31 hi flow turbine whistles pretty good too...lots of great sounds, just not great efficiency! Reed
How can I find out if I have a t49 or a 60 mm turbo on my Grand National?
@workturbo
Жыл бұрын
The TA-49 will have a compressor wheel with 6 primary blades. The TA-60 will have 7 primary blades. Primary blades are the main blades of the compressor wheel that will be closest to you when looking through the inlet. That is the easiest way to tell.
Do u have anything for 85 t type ?
@workturbo
Жыл бұрын
Yes sir! We have every turbo option for the Hot Air Car. From the stock unit, TA-33C, TA-60C, TA-62C, our own G4S-5857 billet, G4S 6262 Billet and also a G4S 6465 billet. We love the Hot Air Cars!
@workturbo
Жыл бұрын
Here is a video link to the Hot Air 5857 here is that video kzread.info/dash/bejne/jKuLyqxwn9uolKQ.html
@workturbo
Жыл бұрын
and a link to some on our website www.workturbochargers.com/work-1984-85-grand-national-hot-air-upgrade/
What produces more power and which one is easier to spin a te44 or the ta60?
@workturbo
Жыл бұрын
The TE-44 will spool a bit faster and the TA-60 will make a bit more power. You could still run the TE-44 with a stock converter...the TA-60 really needs a bit of stall upgrade for most people's liking.
@mikejacobsen3853
Жыл бұрын
@@workturbo would you be able to recommend a newer turbo that's pools quicker than Ta-60 and makes more power on a 10inch 2800 stall?
@workturbo
Жыл бұрын
@@mikejacobsen3853 Super easy...it is our G4S series. We make that turbo in a Stock Appearing and also a 4" inlet version with full ported shroud technology. Our TA-5857 version of this turbo is basically the "modern" TA-49. It will make more power than a TA-60 and spool way faster than a TA-49. I am going to do a video of them next week sometime, but if you watch my Hot Air 5857 video it is basically the same rotor group on the compressor side.
@workturbo
Жыл бұрын
here is that video kzread.info/dash/bejne/jKuLyqxwn9uolKQ.html
@mikejacobsen3853
Жыл бұрын
@@workturbo g43 6765?