I have been a painting contractor for 30 plus years. I'm really tired of painting . I have a pretty decent shop full of tools.your smalls fit right into what I've been wanting to do.I am sure I can put out some really interesting finishes. great Chanel, I've been watching for several months now .just wanted to say that you are doing a great job thank you sir

@kimbercollins6982

Ай бұрын

Ditto, except I’m not a painter😊

Thank you for getting my husband back into his wood shop. Your smalls have inspired him to once again be creative. God Bless you!!!

I've made a ton of money with some of your smalls, thank you Sir. 😊

@MatthewPeechWoodworking

3 ай бұрын

Great job!

@011CJ

3 ай бұрын

It is FDA approved for in direct food contact, and over 90% of people who build cutting boards use it 👍. I got boarded and googled it 😂

You are the bomb dude. I appreciate you man . Your videos are on point

Thanks a bunch Matt! I enjoy the super long format videos. So many ideas in one video that i can sit and play while i do something else.

@MatthewPeechWoodworking

3 ай бұрын

Glad you like them!

Just found your channel. Been wanting to get back into woodworking. Feel like it’s meant to be. I’m super excited.

I've probably seen all these individual videos but I still sat and watched this and was glued to it like it was my first time seeing it. 😂 Keep 'em comin', brother, love the content.

I love the way you install confidence in your viewers.

@sueramsey7031

3 ай бұрын

Those "stitch" things look to me like picture hangers with the notches removed.

Subscribed great video and ideas 💡

I bought 350 cedar fence pickets for $2.35 each a few months ago. After I was done with the fence, I had 140 left over. Plenty of pickets to use up.

Another way to change up the first item, "love the adventure" could be not only duplicated, but could be painted as a Christmas theme too

@CLove511

3 ай бұрын

Make everything snow covered, then have a little Santa silhouette flying in the distance kind of like ET

Love the "Fight Club" reference and the game!

Thanks Matthew, great video compulation... Blessings ❤❤

@MatthewPeechWoodworking

3 ай бұрын

You are so welcome

Matthew peach is goated!!! You think how big this world is. Matthew peach is giving free lessons to you and it can work anywhere in the world. The market is big!

@MatthewPeechWoodworking

3 ай бұрын

Lol thanks!

The cabinet behind you looks nice....Will try make the same for my bedroom. ❤

We made one for a bar here in San Antonio each block is 16'' long 2x4, the sound is wild when it crashes.

The leather is a awesome idea! If you soak the leather in warm water it will be more playable and when it dries it will shrink and become stiff...

Haven't made it done but I'm having fun making these things😂

Love watching you ! You are my favorite on KZread. Joined your Patreon the other day. Good job & thanks so much for all you do!

I’ve been plumbing for 25+ years Accumulated woods tolls through the years I’m ready to do something else

"This is it... This is your mountains." Love it.

Thank you so much. I've started a wood art side business, and you have helped me stay motivated and excited about doing it. Im not very good right now, but I'm getting better with each project!

@pollyp4326

3 ай бұрын

Oh, and p.s. I love the longer videos!

you are a very good teacher keep up the awesome videos

I enjoy all the builds and seeing them in one video that reviews your earlier videos all together is good. Just my thought - if I was a viewer that likes only watching 30 minutes at a time, I would hit pause after 30 minutes and pick back up watching from there for my next viewing session. I always enjoy your videos whether I watch them in one sitting or not. Great videos! Please keep making them.

This is the video i needed tonight. You're right. I can do this! 😀

wow, everything in one video. And still all awesome ideas, Matt. Thanks for this.

😂😂 I was laughing 45 minutes with Christmas tree Made of sticks

I just found your channel. I’ve been watching for hours. Haven’t been able to stop. Thank you for sharing all this info.

Awesome Matt I really like watching your videos every Sunday morning getting my creative juices going!thanks

@MatthewPeechWoodworking

3 ай бұрын

Great to hear! Happy Sunday!

You’re a legend mate

You can in fact cut that sharp angle with your miter saw. You have to take some CA Glue/excellerator and a 1”x6”x20” piece of straight trim. Put some dots of glue on the board and glue to the miter saw table. Don’t worry, you can easily remove the board later. Cut a 45 degree in both directions. Remove the cut offs. Place the piece of trim that you want to cut inside the temporary cut made. Now you have the ability to cut super sharp angles.

As far as that out door hanging shelf I have some great ideas for that you could also use this for gardening with a few modifications super easy love ❤this I wouldn’t pay $425 but at a craft show I would have paid $100-$150 for it easy that was back when I went to all of them so I imagine you could fetch more for it today. ❤❤❤and yes I have Idea for a collection hopefully I have time and money to build them 😂❤

Fight club! Bro...

I laugh constantly, love your videos

I've made this build but it was revert and mounted on the wall. Short self is on the bottom and wide shelf on the top. Ty for the vid Matthew.

Thank you very much. Really enjoy these videos...many great ideas

@MatthewPeechWoodworking

3 ай бұрын

You are so welcome!

For square stock you could use key stock for holding round things on round shafts like pulleys and flywheel. Should have it at any lawn and garden equipment store.

I love these videos. I'm not physically able to walk through store after store. So I really appreciate you did the leg work (pun intended) for us.

Once again!! 👍👍 JimE

Really like your videos Matt, just really started getting in wood working, building the stuff I want lol and partly to sell on the side, thank you man

@MatthewPeechWoodworking

3 ай бұрын

You can do it!

Love all the projects. I'm about to start selling several of your designs. I do have 1 small overlook to bring to your attention. I bought the plans for the Squirrel Feeder Swing. The plans are highly detailed (great job, bro). But the Verticle Arm Support (part G) doesn't show that it gets a 3 degree miter cut in the plans. It's not a big deal, I coulda made it without the plans but I didn't feel right tryin to sell one of your designs without first supporting my local Peech Tree, lol. Anyways, figured I'd mention it. Love the channel. You have no idea how excited you get me to get in the shop & start building stuff. You da man!!!!

I've got very old I guess you'd call them staples? But they're half inch wide and 1.5 wide. Very cool. Left to me by my great uncle. I've made several pictures frames with them . Very vintage look....

To long for me, but I have watched the rest of them when you posted them. Wish there was a new build at the end. I would love to see a unique small item you have designed and created.

I love your small items that can be made with scrap. You give ideas of how much they can be sold for. Where do you sell them? I’ve tried Facebook marketplace, my own Facebook page and a couple of local woodworking sites and a local buy trade and sell. So far nothing has sold. What is your trick? What am I missing?

Thank you very much, Blessings to you and yours!

Man you're changing my life

What would be your best recommendation of your videos for someone with only a circular saw, drill, and basic hand tools?

Can you demonstrate the way to build an outdoor laundry drying rack, please?

Best video ever😊

Thar pool toy holder would look neat with the anchor art you made attached to the side of it.

Matthew was it you that made the picnic table Ketchup, mustard, Salt & Pepper holder and the paper towel dispenser table???

Let’s go!!!!

@MatthewPeechWoodworking

3 ай бұрын

😬

Thanks!

@MatthewPeechWoodworking

2 ай бұрын

Thank YOU!

Thanka so much brother! These always seem to come out in the best timing. Have a question about your filming and video editing.. did u learn yourself or take a class etc...?

I would use a square nail for the faux charcuterie board. Bend it to size and rust it prior to placement.

Thank you Matt

@MatthewPeechWoodworking

3 ай бұрын

My pleasure!

Use the Golden Ratio for pleasing proportions.

Any chance ya could do tall planter boxes, from the hip or Lil shorter. I'm stuck in. A wheelchair. So I'm building a garden I can tend to in my powerchair..I do all types of building in my chair.even my woodshop will be built around my chair. Saw some plastic tall and long planters..but wow they were Hella steep on the pocket Please❤❤❤❤❤❤❤❤❤❤❤

I found a cutting board that was 3 foot long. I bought it to use as a template for the shape.

@MatthewPeechWoodworking

3 ай бұрын

Nice!

Hit it again.

Love your videos. Comment on the pallet flag, should be 13 stripes, u have 11 but I know I’m being picky

Put the leather string into the cracks by soaking first and when it dries it will tighten up.

Bro beefing with the ghost lol

Hi Matthew.. I've been watching your videos for some time now and never thought I'd have such a love for woodworking! So thank you so much for the videos that even as a beginner I understand and am able to follow! Ty! My question is at about 42mins in with the American flag. If I were to actually make it with 13 stripes how would I measure the pieces of wood but keep the same dimensions that you used? Confuses me bc I still want to leave the spaces to be able to see thru the project...? And again, tysm your work is absolutely amazing!!

Never got to comment on your questionnaire post but this was going to be a suggestion. Or I haven’t watched this one yet but see the time run on it. So I come from a gaming background and a union carpenter. But I put streams on throughout the day. So my suggestion got you was do some streams. Whether it be making of video ideas or you doing builds for videos or just messing around in the shop. Doesn’t always have to be a tutorial is what I’m getting at? Good luck in your journey.

Looking at a new makita Brad nailer. The smallest nail it will hold is 5/8. Just starting my business and saw lath nailted together on projects. I would think each one was 1/4 think or will this be just fine. Looking for versatility. Thank you hope I hear from you soon. Love you videos.

"Fight Club" 😂

I'm new at this I'm almost 70 but really love your videos really want to succeed so being said. I'm in to maybe birdhouses or a very ground planters what do you think I have a positive attitude so if I can ask what do you think would really like your input thanks

I might be able to get $10 maybe, for those Halloween 4x4s.

I have had a career change. I am now spending more time woodworking and am trying out some of your ideas. I am starting with the planter projects in preparation for this upcoming spring.

Are you gonna have a compilation of plans too?

Movie reference... you ain't talking about "FIGHT CLUB", are ya? - LOL

You can use fence stapes just spray paint black

That one tree looks like a bunch of mustaches.

I don't get the pumpkin thing, but I see square blocky pumpkins everywhere

is it possible to show us how to make wodden barrel coz the angle is tricky specialy if im using jig saw .thanks i love work and tricks

So you can do the food grade oil over paint? Oil or acrylic?

I would call those pumpkin slats "ribs".

I've been getting all my hardware on TEMU. I got those same 4 post hangers for $2.89 for 10 of them.

@MatthewPeechWoodworking ... what kind of fence pickets are you using? Cedar? Pressure treated?! I really want to get going, but having trouble finding the pickets... I'm in central VT ...

@MatthewPeechWoodworking

3 ай бұрын

Hey! Really either one. Depends on the build. Nothing treated for the indoors.

@kevindurica6092

3 ай бұрын

The price of materials will depend on you state or country. The climate will also dictate the quality of either.

i use crazy glue to seal the bottoms of chairs etc that are outside. it's usually end grain and sucks the glue up well. a few coats of that after staining or before painting. it's funny that humans think we're so complex. cereal companies can manipulate us into buying one thing over another simply by putting it on a different shelf. people will buy something just because it has their name on it. we are very simple.

Only if wood is FREE.

The “Ladder Shelf” We saw similar at local hobby lobby. We wanted to use as display for art shows. But I had my brother build stronger better shelves. We had a number of artist asking where we got them from. Asking for his contact info. Artist want compact sturdy and easy to setup. I would be interested to see what you come up with.

Pumpkin bumps

Holy crap …2 hours and 44 mins lol

1st rule of fight club

SO TELL ME THE TINY PICNIC TABLE , WHAT IS IT FOR , LIKE ?

where can we pick up one of these... What did you call it? A PHONE BOOK? Oh a ''Cook Book'', right we call those ''MENUS''

so your advice is: copy Hobby Lobby and that's the way for woodworkers to make money. yeah...

1:50:30 Ribs not slats

Pumpkin slats= accents lol

Hey bud what is the name of the tool you use to measure at 2:44:13

Enjoyed it but is this a brand new video?

@MatthewPeechWoodworking

3 ай бұрын

It’s a compilation video of some of the smalls I have done in the past.

@GrandmawsWorkshop

3 ай бұрын

I have seen whole lot of your videos so I thought I had seen them Love them all So you run our pickets through planer? Is so, how many runs and what is the depth adjustment do you o with each run

Use a cable staple…it’s already in the U shape

Brass or copper shim stock.

Staging totally affects pricing.

Just putting this idea out there that be a cool project make coasters out of common sports cards that are not worth much like five are ten cents thats what im bout to do i have tons of cards that would be takjng junk wax era cards turning it to something cool

Why does the logo have a mustache when the man doesn't?

What kind of word worker says heigth

Not seeing the video and just listening, you and the guy from 731 woodwork sound the same lol no offense, I like watching both of you guys…