Woodturning - Simple projects that SELL!!!!
Ойын-сауық
In this woodturning video, I turn some red oak into cocktail/beverage smokers. The mesh netting is at obtained at this link: amzn.to/3qVkh0a
I then use my Laserpecker 2 to engrave one of them.
amzn.to/45xNb5K
Black Diamond Affiliate:
blackdiamondpigments.com?sca_ref=439761.Bi5Jr2v7Cg
Starbond Affiliate link and Coupon code:
www.starbond.com/?rfsn=544319...
15% Discount - DoubleD15
Brad's Abrasive Paste and Tung Wax
www.etsy.com/listing/83446238...
Buy Me A Coffee
www.buymeacoffee.com/Tournage...
*Some of these links may be affiliate or sponsor links. Any potential purchasing or even clicking on these links will help support us to make even better content.
Tools I use:
Cyclone - amzn.to/3yOO5tT
Wen Air Filtration Unit - amzn.to/3khVdej
Wen Dust Collector - amzn.to/36u7KTu
PowerTec Dust Scoop - amzn.to/3AMen1r
PowerTec 1 Micron Filter Bag - amzn.to/3hx4kFY
PowerTec Floor Sweep - amzn.to/3xyve62
Blast Gates - amzn.to/36uahNM
LED Garage Lights - amzn.to/3xwAze9
Yellowhammer Bowl Scrapers - amzn.to/2VoHCHr
Rikon Slow Grinder - amzn.to/3xyvJNs
Bucktool Belt Sander - amzn.to/3yDvTmG
Hollowing Tool - amzn.to/2VksKtC
Headset - amzn.to/3hZSu6n
Rikon Carbide Set - amzn.to/2VuMHhy
Lathe Tool Rack - amzn.to/3k3Votf
Пікірлер: 53
Never heard of a cocktail smoker before, looks like a great little project 👍
@TournageDubois
10 ай бұрын
Thank you kindly!!! They are great!
Nice turn this week Double D, thanks for sharing!
@TournageDubois
10 ай бұрын
Thanks, John! Definitely easy. And they sell really well!
I gotta get some of these done. I liked them since you first showed them to me. Great idea👍
@TournageDubois
10 ай бұрын
Thanks, Mike!
Nicely done, DD!
@TournageDubois
10 ай бұрын
Thanks, Billy!
This is a fantastic project! Ive got some bits of whiskey stave that i might try getting into a block to turn into one of these. Would be a cool i think to smoke some whiskey using a smoker made from the barrel it was aged in.
@TournageDubois
10 ай бұрын
I don't disagree with that idea at all!!! Sounds amazing!!!
@Chipswoodworking
10 ай бұрын
@@TournageDubois Thanks for the idea and inspiration! Hopefully it turns out great
@TournageDubois
10 ай бұрын
@Chipswoodworking would love to see it if it does!
Awesome Double D and congratulations on you 2K! 😃
@TournageDubois
10 ай бұрын
Thanks, Val! I appreciate that!
Just made a couple today from cherry. This was a great idea and thanks for sharing.
@TournageDubois
10 ай бұрын
Excellent, thanks Clyde!!! Always fun to have a quick project that can be used to fund our shops!
Great project brother! Love the engraving!
@TournageDubois
9 ай бұрын
Thanks, Seth! Always appreciate you!
Never seen these before but seems like a really easy project. Stuart
@TournageDubois
10 ай бұрын
Thanks, Stuart! They are super easy. They take about 10 minutes at the most!
Looks like an easy turn but great return on your efforts. Nice!
@TournageDubois
10 ай бұрын
Yes it was! I appreciate the feedback!
I have never heard of this before. I will have to give it a try.
@TournageDubois
10 ай бұрын
Yeah, they are super easy and quite popular!
@chrisjohnston2449
10 ай бұрын
And what do you put in it to burn? @@TournageDubois
Those are nice, Daniel. I'm not into craft shows but they are good for those who are. Congratulations on 2K subs. Bill
@TournageDubois
10 ай бұрын
Thank you, Bill! And congrats to you, for beating Huw!
Looks like a good profit margin piece. Well done.
@TournageDubois
10 ай бұрын
Thanks, Doug! It is a pretty good margin. :)
Cool
@TournageDubois
10 ай бұрын
Thank you, Luie!
Yes show us how it works
@TournageDubois
10 ай бұрын
I have a short that I show how it works, but will make sure to do that in the future
Ive never seen one of these used but cool project! Congrats on 2K subs pal!
@TournageDubois
10 ай бұрын
Thanks, Lewis! I did a short too, and showing being used in that one! They work great!
it seems very nice maybe someone can load a video of using it?
@TournageDubois
10 ай бұрын
Thank you for the feedback! I have a short on my channel that shows it being used near the end of that.
Nev3r heard of these but a great idea thanks for sharing 👍 😀
@TournageDubois
10 ай бұрын
Thanks, Tim! I got the idea from HodgePodge WoodWorks!
@timponder7487
10 ай бұрын
@TournageDubois I watch them a lot too you guys have helped me a lot over the past few years
@TournageDubois
10 ай бұрын
@timponder7487 glad to help out!!!
Clever idea……although I have to admit I’ve never heard of a cocktail smoker. Then again I don’t drink but for those who do I’m sure it’s popular. 😊
@TournageDubois
10 ай бұрын
Thanks! I know people who smoke all sorts of beverages (not just alcohol). They are really simple to make!
hey do you have a video where you use the index on your fancy lathe? thanks
@TournageDubois
8 ай бұрын
I don't yet, but I will in the future. I want to do a basket illusion bottle stopper, and that should be perfect for a smaller piece. Thank you for watching!
Thanks for the take-along sir. Appreciate your time and effort. I have an LP2. Assuming you’re using the phone app with yours I’m curious which app you’re using? There are several. I’m using iOS (iPhone). Thanks again!
@TournageDubois
8 ай бұрын
Thank you, Al! I have an Android, so I do use the app and it works great!
Where did you get the metal incerts?
@TournageDubois
2 ай бұрын
I got them from Amazon. There is a link in the description.
Whst is a beverage smoker I use to drink but never smoked my drink lol
@TournageDubois
10 ай бұрын
I never had until I had one in Florida! Definitely changes the beverage flavor!
Uhhh, I suppose I'm really dumb. Would have been nice to show us how it worked.
@TournageDubois
10 ай бұрын
I have a short that shows how it works. If you want to watch that one. Thanks for the feedback, and I'll do that next time.