Thanks Tony, don't forget to turn the band around and I put a big rubber band around it too.

Don't worry too much about getting beat up (and I know you don't). For every one of those comments there's at least 3 of us silent & just being inspired by your work. I certainly wouldn't be turning at the level I am if it had not been for your videos. Thank you for your inspiration, ideas, teachings and most of all the humble approach that allows us to see a master making mistakes while retaining a good attitude - I certainly say worse things than, "You dog!" when I get a catch.

Great to see even a master like you is willing to try another method to secure an item. Derek

You didn't just make a jig...you made a freakin' chuck! That alone was worth watching.

Very clever! Thank you for sharing.

@CarlJacobson

9 ай бұрын

Thank you!

It works great Ted, don't forget to turn the band around and I put a big rubber band around it too.

Thank you Miguel, I look forward to seeing your video. Take care, Carl

Man I'm glad you are such a good natured nice guy Carl!!! Lol. The man knows what he's doing guys, relax. Thanks for another great video Carl keep up the good work buddy! Tim

Hi Carl, which is again a very informative video on how to build a mount for a spoon. Thank you very much

Thanks for your idea every time I look at your site i come away with something postive.

@mizcontrary

10 жыл бұрын

Does this mean that you are making spoons? :) may I come help? Sent from my iPad

@CarlJacobson

10 жыл бұрын

Thank you George

Just what I need. Thanks for the video Carl.

That looks like a great little tool.

that's a pretty good idea for a jig for spoons thanks for uploading

@CarlJacobson

10 жыл бұрын

icespeckledhens Thank you

Carl I have turned only a few spoons like this but it was always so time-consuming to make a jig. This really is so cool. Cant wait to try it. Sam

Thank you Matt,

Thanks Robbie Take care, Carl

I definitely have to make this. Thanks Carl.

Thank you John

Thank you Mike

Thank you Gunter

Thanks Tim, this is the second time this month I'm getting beat up.......lol. Take care, Carl

Great jig Carl, looks very effective. take care Mike

Thank you Philip

some great tips carl thanks for sharing

Also, maybe think about having the screw housing 180 degrees out from the spoon handle, and turning it around to where the tail of the hose clamp won't flare out and catch on anything.

Thank you Steve

CARL nice job and great tip. keep on turning-----------bob

Great job Carl! My thoughts on the slots, face down on a table saw using a sled. Wider curf on table saw blade. The other thing I noticed, if you turn the hose clamp around so the excess clamp end would trail instead of turning into the rotation. Always enjoy your video's, and especially with your daughter... That was awesome.

@torche72

10 жыл бұрын

my thought too.

@CarlJacobson

10 жыл бұрын

Thank you Robert, great idea to use the table saw. I did turn the hose clamp around and put a big rubber band on it when I was using it.

Carl: If I did this, The newspaper would read. "Man killed by flying spoon"... I love the idea though. Thanks, Dennis

@CarlJacobson

10 жыл бұрын

Dennis Adams lol Thank you Dennis

@josefpete4940

6 жыл бұрын

Ambrus aladarDennis Adams

Thank you Lolo

Thank you, I appreciate your support, and kind words. Take care Carl

Wow so inspirational! Thank you for sharing your knowledge

@CarlJacobson

9 жыл бұрын

ProD Miner Thank you very much!

Good job. Could I suggest turning the hose clamp around so that the tail is trailing please? I know i sound like a H&S inspector but I would hate to see the results of contact. Best Wishes, Brendan.

It doesn't matter much what it looks like... so long as it does the job!! And I am also going to give you enough credit, to know where the band is and where your hands are!! Keep on turning... Larry

Very handy little jig there Carl i need to make one myself too thank you for sharing!

@CarlJacobson

6 жыл бұрын

Thank you!

Great Video Carl, Thanks

Very nice , thanks for your time. I like .

Watched the video with interest.. Like the way you work keep up the good work look forward to future ones

Thanks I love watching your vids I do wood work to I live NZ thanks for the tips

@CarlJacobson

7 жыл бұрын

Thank you very much Kishore!

great idea Carl, just watch that tag end of the hose clamp

@CarlJacobson

9 жыл бұрын

DAVE M Thank you Dave, I turned it around before I started turning.

Nice video Carl.

Very good

@CarlJacobson

10 жыл бұрын

Thank you

I did see that video. I'm going to give it a try.

Thank you

Great jig Carl. I think I'd turn the clamp in the other direction so it was trailing as I turn though.

I put a big rubber band around it too.

Thank you John, I put a big rubber band around the clamp before I used it. Yes you're right a V block would be a safer way to cut this.

@oyuk-ormanevi

2 жыл бұрын

Can you show it to us sir?

Love your work Carl, but I'm concerned about a couple of things. 1. Already mentioned is the turning around the clamp. 2. Cutting round stock on the band saw, in my opinion, the way you were doing that is an accident waiting to happen. I would like to see you use a V block with the stock clamped down to avoid any spinning of the wood.

That's an awesome solution to the spoon jig. I'm not going to point out how the clamp should be the other way or the tail should be taped or how "unsafe" your band saw handling is, because ... well, I don't think you're stupid nor reckless. I know I've learned most of what I know about turning from you, and this is a case there the student has not surpassed the master. ;) Thanks for the video!

This was a great video Carl, thank you for posting. During the video you mentioned a video of a similar chuck. I'd like to watch that video also if you happen to know the creator or yhe KZread channel. I realize this is a very old video by todays standards but it's worth a try to ask. Thanks!

Thanks for the info and reply!

Cool idea to clamp it independently of the chuck. I'd probably reverse the direction of that clamp so the tail comes out the other way just in case the cover comes off.

Sorry I forgot to say something about that, I put a big rubber band around it too.

Great video, but for safety reasons you might wanna turn that metal band (dont know what it's called) the otter Way around. IF you should be so unlucky to get your fingers near it it would do a lot less damage. Sorry if misspelling, im from Denmark :)

Salut Carl, c'est une bonne idée, bravo. Lolo

Trying this tomorrow! Mark

@CarlJacobson

7 жыл бұрын

Cool :)

Good idea!!!

Thanks Jim, I forgot to say something about that sorry. I put a big rubber band around it too.

Nice job Carl, not prety but it has to work. Some days ago a friend from my chanel send me a picture of one very close, will do a video of it soon. Thanks for sharing. Kind regards.

Thanks Brendan, I forgot to say something about that, I put a big rubber band around it too. Take care, Carl

I would turn that hose clamp the other way around so you don't get impaled.

Just wondering if it was done on a table saw. Give wider groves for clamping. Just a thought. I will try mine that way.

I like your jig-a simpler solution than mine. Your jig has enough meat to allow a deeper recess for the pipe clamp so that the screw is just even with or slightly below the jig's circumference. And reversed as previously mentioned. Lee Valley now has a reusable 'stretch' tape that is perfect for replacing rubber bands...

@CarlJacobson

9 жыл бұрын

Richard St. John Thank you Richard, I'll have to check out the stretch tape.

Carl check out Ron Brown's solution to this problem. He removes two chuck jaws and then wraps something around the remaining jaws to protect the project and add grip.

Congratulations Carl, I follow with great interest your work, very helpful too, Thanks Stefano Italy

I put a big rubber band around the clamp before I used it, and yes V block would be a safer way to cut this.

I forgot to say something about that I put a big rubber band around it too.

Carl, I would have put the hose clamp on the other direction so that the excess was not spinning towards you but away from you making it less likely to "catch on your hand". The other thing that would make that safer is some duct tape around the pipe clamp.

Thanks, right it doesn't have to be pretty :) Take care, Carl

I did when I used it, and put a big rubber band on too

One thing you may want to do is cover up the tail end of the band clamp and the screw mec. with duct tape or something.

Thank you, I forgot to say something about that, I put a big rubber band around it too.

Yes you would, but I put a big rubber band around anyway.

Very cool! I like to turn hairpins and their tiny diameter makes it a little hard to work with. I usually have to rough out the top, turn the pointed end all the way down and then put the thin end in the chuck, which often mars it up resulting in more sanding. Making something like this but much smaller may be a nice way to hold the pin without letting the chuck damage it. Not to mention I could make pins that are hollowed on one side or even carved through.... *Eyes light up with the possibilities*

@CarlJacobson

10 жыл бұрын

Nevir202 Thank you, These are great little jigs, and you can customize them for your needs.

You should cut the slots deeper past the band so that the band has leverage to pull inward. It looked like you stopped at the band in the sawing part of the video, though it did look like you had cut deeper in the later shot of you holding the Jig. And drilling out the center would also help.

Carl ... Watch that hose clamp ... if you turn it around, there is less chance of getting nailed by it. Don't ask me how I know.

Thank you Bob

Carl Great Video. Be careful of that metal band. You should tape it down with some duct tape before turning- just a suggestion before you get hurt.

@CarlJacobson

10 жыл бұрын

Thank you Ted, I put a big rubber band around it when I use it.

I let the dogs play with it....lol "Cracking jig" I'll check into that.

Oh Thomas, everything is an accident waiting to happen. You just need to pay attention and minimize your risk. I put a big rubber band around the clamp before I used it. Take care, Carl

I think I have one but I'll check.

Make sure the clamp flap is trailing when you do this! also you might want to tape it down with some duct tape as extra precaution against possible catching on tools and body parts. Just a safety suggestion.

@CarlJacobson

5 жыл бұрын

I did turn it around and tape it before I used it, but yes safety first!

I also was concerned about the hose clamp, but you'd get nailed by the spoon handle well before you came into contact with the clamp.

Thanks! I'll try this! You might consider turning the clamp over... so the tongue is facing away from your hands

@CarlJacobson

7 жыл бұрын

Thanks! I did when I turned the lathe on :)

Honestly, don't get why you get hammered about safety, anybody every saw Sam Maloof work a bandsaw ?? We all know to be careful. Thanks for sharing Carl, your vids are really inspiring !

Yep. If so was my idea to made one, I was going to do the paddle with the router

I put a big rubber band around it.

Hi Guy, did you find a place to set up your shop? Take care, Carl

you should make a scoop chuck, a youtuber has a video on it

Um die Klemmwirkung zu erhöhen, würde ich den Schlauchbinder so weit wie möglich vorne anbringen. Sonst jedoch eine Super Idee.

Ola Sr Carl sou do Brasil e sou fa de seus trabalhos tambem trabalho com torneados mas nao chego nem a seus pes um abraço e uma boa noite

If you flip the clamp it might be a bit safer as it rotates during turning.

@CarlJacobson

7 жыл бұрын

Thanks for the tip Shane!

Do you drink whiskey? Your voice is awesome!

How big was the block you started with?

@CarlJacobson

5 жыл бұрын

I'm not sure this was a long time ago.

Hey Carl could you do a video about face plate turning on your other channel?

*whistles* What lathe is that? That thing is spinning really true!

@CarlJacobson

10 жыл бұрын

It's a Delta 46-460

a wooden collet, who woulda guessed

What wood did you use to make the jig?

Be careful with the hose clamp, it would cut your hands .Take care

I think it a brilliat jig but one point of safte just tern the jubllee clip around the other wayfor safety