An In-depth review of the Woods Equipment Batwing BW12 Rotary Cutter specifically designed for Compact Tractors.
Жүктеу.....
Пікірлер: 45
@amandadavis97265 жыл бұрын
Just need to get the collars for you hydraulic cylinder, so that you can control the height without guessing. It looks impressive to me.
@bobpowell93978 жыл бұрын
Looks like a good mower except for the pneumatic tires. Last thing I want to have to worry about is keep four more tires aired up.
@jessecantrell7317
7 жыл бұрын
tires can be laminated or foam filled aircraft tires
@joshcreamer4716
6 жыл бұрын
Bob Powell agreed, especially with bush hog work, never know whats down there.
@89vette18 жыл бұрын
Thanks for the video. I'm shopping for a batwing now and there is a good deal on a woods BW12 locally.
@longtimepittsowner55892 жыл бұрын
I looked at all of the comparable units on line. The BW appears to have the lowest weigh. This likely directly corresponds to the lower HP requirements. In addition I did a price comparison to all the similar models. 13,300.Is the best price I located Within an hours drive from the farm for pickup. I have a 60 hp NH 4WD With one set for hydraulic operation. This unit gets my vote for the above referenced reasons and one more; It’s designed byWoods .
@sukicruz75435 жыл бұрын
I used a 15ft cutter for over 5 years rite now.but to get your level of the cutter you need jack stopper,at the center jack .so if you go up and bring down it won't pass your level you want.and wont damage your cutter .
@JamesTyreeII
4 жыл бұрын
I love it! I would but one
@ChaseLandMgmt7 жыл бұрын
Outstanding video. looking to replace my 3038E and MX5 with a 4066R and a BW12!
@jdr677 жыл бұрын
Great video and narration but had one question about the field size. What was the average speed when you mowed the 10 Acres ? You said you could do it in 45 minutes. With a 12 foot mowing width you would have to average 10 MPH to do 10 acres in 45 minutes. Or was this just a 10 acre perimeter with a lot of trees, etc. in it with the actual grass size a lot less ? Just wondering how much grass you can really mow per hour with it. Given the 12' bat wing cost about $9000 plus the tractor cost do you feel it is a cost effective way to mow a large field. I see some contractors quoting $30/Acre to do the work. thanks.
@marknussbaum8394
4 жыл бұрын
A 12' wide rotary cutter will cut 1.45 acres/hour for every mph of speed. So in theory if running 4 mph you'll cut 5.8 acres/hour. When accounting for overlap and turning, you'll do well to cut 5 acres/hour. Hope this helps.
@gggrahamdo4 жыл бұрын
Do you still like it? I have an older Woods 12' 7144RD and that's a big issue. It looks like fewer moving parts on the new one.
@salassik8 жыл бұрын
The tires are foam filled. No worries about flats.
@garywilliam19487 жыл бұрын
I have a 36 horsepower tractor with one set of hydraulics. You mentioned an adapter, what's it called and how does it work?
@benwolfe19816 жыл бұрын
If you don’t mind i would like to know the make and model of the tractor you are using in this video. I am looking at this mower and was just wondering how your tractor compared to my mahindra 3550.
@benwolfe1981
3 жыл бұрын
His tractor is gonna be same as your 3550 Mahindra . He said he had 45hp at the pto which makes its 50 ish hp tractor
@-Silly-Willy-05 жыл бұрын
Did you cut it twice to get that finish cut quality? Really considering getting this model over there finish mowers. Tbw150c and the Tbw144 are my other options.
@bearkatljl8 жыл бұрын
Cool video. I recently purchased a Landpride RC2512 I considered the Woods and the Rhino as well as the Bushhog brand. I bought the Landpride over the others because I like the blade carrier better and the gearboxes on the Woods were much smaller than those of the Woods. I like mine as much as you like yours although I mow much taller stuff than you. I posted a video of mine in action as well check it out if you get the chance.
@vickipoe39256 жыл бұрын
Should have a stop or ring on the lift cylinder to set the height so you can mow same height all the time.
@skeets60606 жыл бұрын
DAYUM !!!!! That will work
@donjohnston89444 жыл бұрын
Do they make one a little smaller for 30hp tractor?
@beasley7627 жыл бұрын
great video. what make and model tractor is that?
@beautifulfouse7 жыл бұрын
What do you think of the John Deere HX series. I have and HX 7 and am looking to get an HX 10 foot. ???????????
@-Silly-Willy-05 жыл бұрын
Nice video. Thanks
@decothran6 жыл бұрын
Great video!
@marckemp99552 жыл бұрын
The rule of thumb for regular hogs is I think 3hp/ft. So that’s definitely a bigger power requirement.
@heathalford4721
Жыл бұрын
I’ve always been told 5hp minimum per foot of cutter.
@funwithguns895 жыл бұрын
Since having this rotary cutter, have you tried it with a smaller tractor? I know you mentioned a 35hp tractor may pull this unit well.
@youtubuzr
4 жыл бұрын
It requires 35HP at the PTO, so probably 42-45HP tractor mininum.
@shannonwhitaker9630
3 жыл бұрын
Having used one I'd say 50hp and 40+pto hp works just fine. Around 65hp would be a bit more ideal for heavy duty overgrown cutting. Will do low often cut grass on smooth ground at an amazing speed. Tractor barely works to cut the lower green fresh "yard" grass. Cut quality is amazing almost like a giant zero turn or finishing mower with virtually no scraggles left sticking up. Mower will cut evenly right down to putting green height. Great cutter.
@dandavidson72393 жыл бұрын
I didnt like it, I fricken loved it!! Nice job!!
@starnet366 жыл бұрын
What town in NY state are you near?
@TLeacher6 жыл бұрын
I just attempted to buy one at a dealer in TN. They said that my Massey Ferguson 1455V 55hp engine, 48hp on the PTO was too small and it would be dangerous to use this on hills. They said I would have to upgrade to a 64hp on the PTO. They wanted to sell me a Massey 2607H. Have you used this on hills anywhere? I wish it would work. I felt like they were trying to up sale me. I would need to get remote hydraulic kit on the back. Anyone else have experience w/this mower? Particularly on hills? My property is steep in places.
@swf2e
6 жыл бұрын
The weight of this cutter could push smaller tractors around on hills and slopes. Especially if the tractor is not ballasted properly and/or two wheel drive. These smaller size tractors can run the cutter as a “pasture clipper” like was shown in this video. It was all nice clean grasses and cutting a couple feet off at most. Had they truly used this cutter to its capacity, the tractor would have been questionable on having enough power. It is rated to cut small trees and brush up to 1.5” in diameter.
@electrified7309
6 жыл бұрын
Dont listen to that BS, these old timers say 5hp per ft. but thats just not the case with these newer batwing mowers they are designed for your 55 hp tractor
@jessecantrell73177 жыл бұрын
tires foam filled?
@charlesbelser1585 жыл бұрын
You left out why this is better than other brands etc. re we supposed to just buy something based on you said " it was awesome" etc. Why not John Deere, Bush Hog or Rhino?
@-Silly-Willy-0
5 жыл бұрын
charles belser John Deere batwings are made by woods, they just paint them green and put frontier on it
@brandoncaldwell95
4 жыл бұрын
If you want a heavier duty one, look at the Rhino TS12, Bushhog , Modern Ag Viper 12, or the BushWacker 12 foot mowers. Muh heavier duty. The Modern Ag and BushWacker models handle up to 3in cutting.
@wonderfulworldofwhitetails97638 жыл бұрын
That would cut my plots in 1 pass.
@giorgisharadze9034 жыл бұрын
Hey I build these
@marckemp99552 жыл бұрын
Alfalfa? Nah, I’m more Stymie and used to be more Porky.
@marckemp99552 жыл бұрын
Nope
@VietLe-USA2 ай бұрын
I wish you would do more cutting than talking. Most of us come here for the satisfaction seeing a time lapse of you mowing that 300 acre farm, not the general info about the unit.
Пікірлер: 45
Just need to get the collars for you hydraulic cylinder, so that you can control the height without guessing. It looks impressive to me.
Looks like a good mower except for the pneumatic tires. Last thing I want to have to worry about is keep four more tires aired up.
@jessecantrell7317
7 жыл бұрын
tires can be laminated or foam filled aircraft tires
@joshcreamer4716
6 жыл бұрын
Bob Powell agreed, especially with bush hog work, never know whats down there.
Thanks for the video. I'm shopping for a batwing now and there is a good deal on a woods BW12 locally.
I looked at all of the comparable units on line. The BW appears to have the lowest weigh. This likely directly corresponds to the lower HP requirements. In addition I did a price comparison to all the similar models. 13,300.Is the best price I located Within an hours drive from the farm for pickup. I have a 60 hp NH 4WD With one set for hydraulic operation. This unit gets my vote for the above referenced reasons and one more; It’s designed byWoods .
I used a 15ft cutter for over 5 years rite now.but to get your level of the cutter you need jack stopper,at the center jack .so if you go up and bring down it won't pass your level you want.and wont damage your cutter .
@JamesTyreeII
4 жыл бұрын
I love it! I would but one
Outstanding video. looking to replace my 3038E and MX5 with a 4066R and a BW12!
Great video and narration but had one question about the field size. What was the average speed when you mowed the 10 Acres ? You said you could do it in 45 minutes. With a 12 foot mowing width you would have to average 10 MPH to do 10 acres in 45 minutes. Or was this just a 10 acre perimeter with a lot of trees, etc. in it with the actual grass size a lot less ? Just wondering how much grass you can really mow per hour with it. Given the 12' bat wing cost about $9000 plus the tractor cost do you feel it is a cost effective way to mow a large field. I see some contractors quoting $30/Acre to do the work. thanks.
@marknussbaum8394
4 жыл бұрын
A 12' wide rotary cutter will cut 1.45 acres/hour for every mph of speed. So in theory if running 4 mph you'll cut 5.8 acres/hour. When accounting for overlap and turning, you'll do well to cut 5 acres/hour. Hope this helps.
Do you still like it? I have an older Woods 12' 7144RD and that's a big issue. It looks like fewer moving parts on the new one.
The tires are foam filled. No worries about flats.
I have a 36 horsepower tractor with one set of hydraulics. You mentioned an adapter, what's it called and how does it work?
If you don’t mind i would like to know the make and model of the tractor you are using in this video. I am looking at this mower and was just wondering how your tractor compared to my mahindra 3550.
@benwolfe1981
3 жыл бұрын
His tractor is gonna be same as your 3550 Mahindra . He said he had 45hp at the pto which makes its 50 ish hp tractor
Did you cut it twice to get that finish cut quality? Really considering getting this model over there finish mowers. Tbw150c and the Tbw144 are my other options.
Cool video. I recently purchased a Landpride RC2512 I considered the Woods and the Rhino as well as the Bushhog brand. I bought the Landpride over the others because I like the blade carrier better and the gearboxes on the Woods were much smaller than those of the Woods. I like mine as much as you like yours although I mow much taller stuff than you. I posted a video of mine in action as well check it out if you get the chance.
Should have a stop or ring on the lift cylinder to set the height so you can mow same height all the time.
DAYUM !!!!! That will work
Do they make one a little smaller for 30hp tractor?
great video. what make and model tractor is that?
What do you think of the John Deere HX series. I have and HX 7 and am looking to get an HX 10 foot. ???????????
Nice video. Thanks
Great video!
The rule of thumb for regular hogs is I think 3hp/ft. So that’s definitely a bigger power requirement.
@heathalford4721
Жыл бұрын
I’ve always been told 5hp minimum per foot of cutter.
Since having this rotary cutter, have you tried it with a smaller tractor? I know you mentioned a 35hp tractor may pull this unit well.
@youtubuzr
4 жыл бұрын
It requires 35HP at the PTO, so probably 42-45HP tractor mininum.
@shannonwhitaker9630
3 жыл бұрын
Having used one I'd say 50hp and 40+pto hp works just fine. Around 65hp would be a bit more ideal for heavy duty overgrown cutting. Will do low often cut grass on smooth ground at an amazing speed. Tractor barely works to cut the lower green fresh "yard" grass. Cut quality is amazing almost like a giant zero turn or finishing mower with virtually no scraggles left sticking up. Mower will cut evenly right down to putting green height. Great cutter.
I didnt like it, I fricken loved it!! Nice job!!
What town in NY state are you near?
I just attempted to buy one at a dealer in TN. They said that my Massey Ferguson 1455V 55hp engine, 48hp on the PTO was too small and it would be dangerous to use this on hills. They said I would have to upgrade to a 64hp on the PTO. They wanted to sell me a Massey 2607H. Have you used this on hills anywhere? I wish it would work. I felt like they were trying to up sale me. I would need to get remote hydraulic kit on the back. Anyone else have experience w/this mower? Particularly on hills? My property is steep in places.
@swf2e
6 жыл бұрын
The weight of this cutter could push smaller tractors around on hills and slopes. Especially if the tractor is not ballasted properly and/or two wheel drive. These smaller size tractors can run the cutter as a “pasture clipper” like was shown in this video. It was all nice clean grasses and cutting a couple feet off at most. Had they truly used this cutter to its capacity, the tractor would have been questionable on having enough power. It is rated to cut small trees and brush up to 1.5” in diameter.
@electrified7309
6 жыл бұрын
Dont listen to that BS, these old timers say 5hp per ft. but thats just not the case with these newer batwing mowers they are designed for your 55 hp tractor
tires foam filled?
You left out why this is better than other brands etc. re we supposed to just buy something based on you said " it was awesome" etc. Why not John Deere, Bush Hog or Rhino?
@-Silly-Willy-0
5 жыл бұрын
charles belser John Deere batwings are made by woods, they just paint them green and put frontier on it
@brandoncaldwell95
4 жыл бұрын
If you want a heavier duty one, look at the Rhino TS12, Bushhog , Modern Ag Viper 12, or the BushWacker 12 foot mowers. Muh heavier duty. The Modern Ag and BushWacker models handle up to 3in cutting.
That would cut my plots in 1 pass.
Hey I build these
Alfalfa? Nah, I’m more Stymie and used to be more Porky.
Nope
I wish you would do more cutting than talking. Most of us come here for the satisfaction seeing a time lapse of you mowing that 300 acre farm, not the general info about the unit.