Around 1975 Dad had a bundle of cedar shakes in the barn where I worked on my car. Had a little wood stove for heat. Those shingles made perfect kindling. I hardly remember dad being so mad at me.

@samgibson684

Жыл бұрын

lol

@johntillotson4254

5 ай бұрын

Funny 😅

You just saved us all alot of money compared to what a commercial jig costs. Thanks for sharing your experience

@guillo2388

Жыл бұрын

Glad to hear that. You can get more shingles out of the wooden block by cutting them 1/8 to 1/4 thick. In this case, a 1/8 spacer should be used. Any question related to set up, feel free to contact me.

And by the way this is the best setup I've seen. I also have the 126 and love it. Thanks so much for posting.

Source for door shims and spacers too. The best jig I've seen so far.Thanks.

Thank you Sir for posting.....the best procedure I have ever seen.A blessing to watch a craftsman.

@guillo2388

3 жыл бұрын

You are very welcome

Thanks for the video, I am going to try this setup myself.

@guillo2388

3 жыл бұрын

Good. Contact me if you need some information.

im so happy i found this video. i wasnt even looking for it but its exactly what i need to do in a few months

Using a jig is such a great idea! Thanks for the inspiration! The wife wants me to try and do some flooring from our pine and this will definitely help out!

@guillo2388

10 ай бұрын

Thanks, Thomas, for the comment. This was my first time cutting shingles. I used 1/4" space and alternating the high of the head by 1/4 to 1/2 in order to get shingles 1/4 to 1/2 and or 1/2 to 1/4. You can play with head adjustment and or use thicker/thinner spacers to get the thickness you want. If you need some help with the set-up, feel free to contact me.

That is an ingenious way to make uniform shingles. I like it 👍👍

@guillo2388

3 жыл бұрын

Glad you like it

I’m going to make me one of these jigs!!! Simple and effective. Thank you for sharing!!!

@guillo2388

2 жыл бұрын

If you need help with the setup, contact me. Thanks.

If I could give you 2 thumbs up I would...very ingenious!

@guillo2388

2 жыл бұрын

Thanks, James

I really appreciate the video. Looking for a simple and inexpensive way to do this, and this is perfect!

@guillo2388

2 жыл бұрын

I wish I could do a better video but, I don't have enough experience; it's not my area. If you need some info on your set-up, feel free to contact me. Thanks.

Nice job! thinking about getting one of these mills

I’m building a cob air bnb house and want wood shingles. Thought about doing it by hand, but it would just take too long. I’m going to try this setup. Thanks for the video.

@guillo2388

4 жыл бұрын

Any question when doing your setup, just let me know. I would be glad to help you.

Very clever! I have a lot of Pine which I would like to make into roof shingles. I know with Canadian Cedar, Linseed oil is used to treat them. What do you use to treat your shingles? And what wood is this in the video ?

Great presentation

Best way I have seen yet

Just got the same mill as yours. Would like to see a video on how you built that jig.

@guillo2388

Жыл бұрын

Jerry, it's a very simple jig: one horizontal board with two inches board attached to the opposite sides of the clamp. One inch of this two inches board will stick up to support the wooden block and prevent it from twisting when the blade is cutting. The wooden block is attached to the horizontal board using 1x1inc. sticker. If you need some more information, please let me know. Sorry about the late reply.

Cool jig. Shingles are super expensive.

@guillo2388

2 жыл бұрын

Yes they are!

I like the setup and I am just wondering if you have an idea of how long it takes to cut the equivalent of a “store bought” bundle ? Thanks for sharing

@guillo2388

3 жыл бұрын

I never buy shingles and or I don't know how many in the bundle. The amount depends on the number of blocks and the quick placing and removing spacers at every pass. The video was in real time and the action was like cutting regular boards.

Looks like you need a cordless blower. Thanks for the idea

Clever as hell! I can see lots of ways to speed up the process too like push-pull toggles and maybe a "cam" to lift and lower the block. Wide shingles are spendy and getting harder to find. Not using any water?

@guillo2388

3 жыл бұрын

It looks like I forgot to turn water on. Also, we can use small steel hinges under blocks to go lower with the blade and getting more shingles. Thanks Jeff for you comment.

That is such a simple idea and it works, are the blocks just held in by the stop they are up against and their weight? You are clever.

@guillo2388

4 жыл бұрын

Each block is attached to the horizontal board using the first stick (hinge). Two screws to the board and two screws to the block.

Simple and effective .....I Like it.

Please post a picture of where you used these shingles

ABSOLUTEY AWSOME

When I saw how much the jigs to do this cost, I wondered if this would work!

@guillo2388

11 ай бұрын

It did work for me very well.

how do you think bering spuce shingles would fair

@samgibson684

Жыл бұрын

Spruce is bomber....

Brilliant!

Nice job

I suppose you could put your blocks vertically say after they got to a 5-6" depth. That would give you some varying widths.

@guillo2388

11 ай бұрын

When blocks are too small to make more cuts, I put some of them together using waterproof glue. This way I get one more workable blocks.

@hpw59

11 ай бұрын

Beautiful....watched all over again is that cedar

@guillo2388

11 ай бұрын

It is oak

Killer idea!

Can I get a idea of how much a machine like this cost. Again thanks for sharing you made look simple I would like to try make a few thousand I need for the cabin

@guillo2388

3 жыл бұрын

Jose, the actual price for this machine is $3,199.00. You can get more accurate info by visiting manufacturer: woodlandmills.com. Thanks.

Nicely done

@guillo2388

3 жыл бұрын

Thanks!

watched other videos of someone with bandsaw making lap siding with a jig from another saw manufacturer. I wonder if you could put can't blocks sideways from what you have with a jig for lap siding and do 10 to 12 at a time. never used a saw mill but just wondered

@brunorios7223

Жыл бұрын

look for NORTHWEST SAWYER for what I was talking about

@guillo2388

Жыл бұрын

If the cutting path of the machine is wide enough, it can be done. But, never make the cut along the grain because the undesirable saw dust produced this way.

Pretty cool shingle maker. Did you build the wood shed as well?

@guillo2388

2 жыл бұрын

Thanks William. Actually, there are two sheds. The smaller one was built using most of the lumber from Home Depot/Lowe's. The bigger one I used rail-road ties as pillars. The rest of the lumber was cut using the milling machine.

@kameljoe21

2 жыл бұрын

@@guillo2388 Cool. Thanks!

Awesome! What are those 1x1 sticks attached to each block doing?

@guillo2388

2 жыл бұрын

The first one (left) is the one that holds the wooden block to the flat board. It is also acting as a hinge. The second one (right) is just a handle to lift the end of the block in order to place/remove the spacer.

Thanks for sharing......brilliant

@guillo2388

3 жыл бұрын

Glad you enjoyed it

Cool video. What are you going to do with the shingles? Post pic or video on them

@guillo2388

3 жыл бұрын

I used some for a roof section of one shed. I have a second shed where I'll be using some more.

@sitehost

3 жыл бұрын

@@guillo2388 well cool. When you do the next shed show us how you do it.

Probably a dumb question, but did you dry the blocks before cutting the shingles?

@guillo2388

Жыл бұрын

No, I didn't. In order to dry lumber, one year is needed for every inch thick. What I did was to soak shingles in a solution of used motor oil and diesel fuel (50/50)

@OptionsJunkie

Жыл бұрын

@@guillo2388 Very nice, what type wood is this and where did you end up installing these on a home?

@guillo2388

Жыл бұрын

@@OptionsJunkie The wood used was white oak. I installed some of those shingle on the front short section of the roof of one of my sheds.

is the machine Mills hm 122 or 126?

@guillo2388

4 жыл бұрын

It is 126

What species of wood are you sawing? What wood makes the best shingles? Thanks

@guillo2388

2 жыл бұрын

I was sawing white oak. According to Google info, there are other wood what can be used for shingles: black locust, honey locust, redwood, cedar, rock elm, etc.

Very good.

@guillo2388

3 жыл бұрын

Thanks!

great idea what is the size of your shingles?

@guillo2388

3 жыл бұрын

Long-16", thickness: one end-1/4", the other one -1/2. Width is variable, depending in the block of wood.

@jbettimperley1225

3 жыл бұрын

thanks for getting back to me

What are the dimensions of the finished shingle? Thanks

@guillo2388

2 жыл бұрын

Long-16", thickness: one end-1/4", the other one -1/2. Width is variable, depending on the block of wood.

What hold a the block from jumping I would like to no.

@guillo2388

3 жыл бұрын

Raymond, I would say gravity prevents the block from jumping. Also, as you can see, the block is attached to the platform (horizontal board ) using the first 1"X1" stick.

How much do you lower the blade for each pass?

@guillo2388

2 жыл бұрын

-Pass with spacer under right end, lower head (blade) 1/4" -Pass without spacer under right end, lower head (blade) 1/2"

@aidacapangpangan6054

2 жыл бұрын

You can make them any thickness as long as you cut one time at a thickness you want the thick end and then half as thick on every other cut.

What did you use for the bottom and side boards for the frame? (2" X 12")

@guillo2388

2 жыл бұрын

The horizontal board (bottom) is 1.5"X11". The vertical one (side support) is 2.5"X1.5".

@davidbauknight61

2 жыл бұрын

@@guillo2388 Thank you so much. Getting ready to cut cedar for our house and your system will definitely work for me. Blessings and have a great 4th.

@guillo2388

2 жыл бұрын

@@davidbauknight61 Before cutting the blocks out of the can, I suggest placing a mark on what is going to be the top face of each block. This way there will be good shingles right from the first pass. Also, the remaining of each block can be used to make additional blocks using waterproof glue.

@davidbauknight61

2 жыл бұрын

@@guillo2388 Great idea. I've even thought of turning the cant 90 degrees so the grain will be in line with the blade and make the grain stand out a little more. I have a blade that has two teeth that have a little more "rake" and gives a more grainey texture. Any thoughts? Thanks for your ideas and suggestions.

@guillo2388

Жыл бұрын

@@davidbauknight61 Be careful when cutting along the grain. It creates an angel air like dust what accumulate in the pullers and belt, crashing the machine.

What ist the thiknes of the shingel

@guillo2388

3 жыл бұрын

One end is 1/4", the other end is 1/2"

worst cameraman ever js

@guillo2388

2 жыл бұрын

Sorry g maurstad; I was half way doing this job when I decided to grab the phone and record part of the process. I just wanted to share the way I did it, just in case someone would like to take advantage of the setup.