Here you find of my SCREWS ON SALE: www.etsy.com/de/shop/LittleForestSuomi?ref=seller-platform-mcnav

Beautifully cut threads!

Super crisp threads! The pre-cutter seems like a great addition. Neat trick for checking roundness of handplaned dowels too. Thank you!

@pettere8429

Жыл бұрын

I have been thinking of doing a rough pre-carving of the thread before putting it into the thread box. Not going quite as far as Wood by wrigth and carving the thread to final dimensions but getting rid of some of the waste with easier to sharpen tools. Also, nice to see that the Scandinavian woodworkers on YT watches eachothers content.

@littleforest

Жыл бұрын

Hello Petter, i've been thinking about same or similar ideas with the 'pre-cutting' but skipped it because of this: it would be difficult to catch the right place to start the dowel with the dye. hope these words are understandable. Do you have an idea in mind how to solve it?

@pettere8429

Жыл бұрын

@@littleforest My thought has been to use a blade sticking into a hole with the same diameter as the dowel and at the same angle the finished threads would be, basically what you did in your video on making the initial tap. Then I would chop into that cut a little bit from both sides with a chisel and possibly go as close to the full depth I could manage at the start end of the thread.

An absolute treat to watch, incredible craftsmanship, thank you very much for sharing🙌🤘🙌

C'est beau. Beautiful. La technique n'aurait jamais dû aller plus loin.

@littleforest

Жыл бұрын

Oh oui, c'est vrais. J'imagine un camera tout en bois pour faire le filme. Peut être en bois de noiyé, comme les vieux appareils foto des temps passés. Fabriqué qq par d'autre que en Chine peut être... Un vraiment bel appareil. Merci pour cette inspiration.

Beautiful work there!

Beautifully done! Greetings from a German wood turner. "Drechsler Norbert Pauli"

Amazing and hypnotic, very beautiful

Wow I have watched since forever when you started with some spring plate steel and paper drawings to make the initial pitch cutting dowel. Now you have this refined screw box and a matching tap setup. Very well done.

Gratulation zu diesem Filmchen - eine gelungene Dokumentation und schön anzuschauern . . .

Amazing video, you are master of your craft friend 👍

A joy to watch your videos. Your workshop makes a great backdrop in the videos as well. Always inspiring and I admire your imagination to keep coming up with great ideas. Well done. One Handed Maker - Australia

@littleforest

8 ай бұрын

Oh, thanx!

Superb screwology

nice work! I am trying to hand carve a pair of big screws right now. working well so far on the first one.

Super cool

Achei o máximo teu trabalho. Parabéns.

Спасибо! Всё просто и понятно.

Great !

Awesome

👌

Это самый лучший способ ютубе !!

Hi, looks like a newer simpler die. Do you have a video about making it?

@littleforest

Жыл бұрын

Yes, it is bit more simple, one blade only (plus pre-cutter). This setting feats well to the new design of the screw. I made may trials to get the best possible tool, but did not film the process (to not burst the time input ;-). But basically it is not much different than my first die.

hello, have you any sources how to make a kuksakorrectly and how to treat it?

Great update! I am looking to make my own wooden screw and was wondering what wood species you used to make the screw? Thanks!

@littleforest

Жыл бұрын

I used birch but made also good experience with Hackberry and Mountain Ash. Good luck for your own screws!

Wicked clean! ^^ You actually made an improved screwbox!? Looks like you added a cutter for cleaner teeth surfaces, does it help with tareout as well?

@littleforest

Жыл бұрын

Good morning! A clear yes for both questions. Specially for the second one.

I like this tiny little wooden plane you are using to bring the square wood to round. Did you make it yourself?

@littleforest

2 ай бұрын

It was once a gift from my dad, just for decoration. I added a chisel-blade inside, and it is now a good helper of beauty and practical value :-)

👍👍👍👍

Absolutely beautiful! These are honestly the best crafted wooden screws I have seen! Did you follow plans or do some reading in order to make them, or was it just trial and error? If it was using plans would you be willing to share where you got them? Thanks!

@littleforest

Жыл бұрын

Hello :-) Lot of research has been made before - it took me one whole winter to figure out how to do it; and winters are quite long up here. No, i did not find ready plans for it, but have put all the information plus some own inventions together. Did you watch my other videos about screw-making?

@solrogersmullins5973

Жыл бұрын

@@littleforest Thanks for responding! Wow that sounds like some dedication. I did watch your other videos (which were beautifully made) and thought they were a wee bit light on written detail for someone trying to recreate what you did. I think someone needs to write the definitive "History and Construction of Wooden Screws" book ;)

@littleforest

Жыл бұрын

Oh yes, good idea! I would have been happy to read it before starting. Anyways, i hope, you are getting closer to your own screws. Enjoy the way there and than the goal ;-)

would you sell the screw boxes? i would love to make one. but i know i am not technically minded enough to make my own. i suspect there are many others who are in the same boat as me.

@littleforest

Жыл бұрын

Hello Daniel! I have been thinking of it, but till now, it did not came into reality. And right now, i just bought a new (am very old) place to live which needs some hands on before the next winter - i will be quite busy this summer. But in principal, if there is time, yes, i could imagine! Maybe i could find time next winter, but would not like to promise it until am am sure. Just to think about it: To make the screwbox is quite a big job and it would turn out quite expensive. So, if you just need it to make one, two screws, i think it makes more sence to bye the ready screws. You can still find some following the link in the video description. So far, a best springtime to you :-)

Great video! Would you be willing to provide a drawing to build your screw box and tap? Thank you!

@littleforest

3 ай бұрын

To be honest, i did not make many drawings myself. The only ones i made are shown in my videos - so, take a close look :-)

looks better with this pitch on the screw. Do you have two knives on the die?

@littleforest

Жыл бұрын

Yes, i thought so too. I made different new tools, the one shown has one blade only, plus pre-cutter. I've been just curious to try different ideas out. It works well like this, one blade seems to be enough. Maybe also because of developed soaking, less deep cut, lower pitch (the blade comes closer to 90° to the grain. Maybe some other causes i did not figure out yet.

Great update. I am really itching to try it and replace a battered wood screw in my used bench. Is there any table of woods that are suitable or unsiutable? I was thinking of using a very hard wood like Hornbeam *Carpinus betulus* but not sure if its a good idea or not. Keep up the good work, love your videos.

@littleforest

Жыл бұрын

If i would have white Beach (Carpinus betula) with the right dimensions available here i would use it. As a rule of thumb: hardwoods with close pores are suitable. Take into account, that hard wood goes heavy onto the tools. They should be of harder material than the thread. But this might not be a problem if you want to just make one screw for your workbench. Good luck with it :-)

@HibikiKano

Жыл бұрын

@@littleforest Thank you. Will try it out and let you know once im done.

Great job and beautiful videos! Did you come to any conclusions about the oils? They help? One more than the other?

@littleforest

Жыл бұрын

Hello Victor, Yes, they definitively help! I guess, there is no better or worth but, like so often, there are pros and cons: As more liquid, as faster it penetrates the wood but it takes longer to harden. I have tried many oils (mostly linseed oils; raw, boiled and stand but also tung and parafin). There are real differences not only between the kind of oil, but also between the same kind from different brands. Also the wood species makes a difference. So just linseed oil should work, but if you want to go deeeper into it, than some experiments will help..

@victorcamposdeoliveira1591

Жыл бұрын

​@@littleforest Thanks for the answer! I thought now that maybe even hot water would help. I'll try with linseed oil. Maybe it's good to use the same one that will be applied as a finish.

you should make a pedal lathe, faster and more accurate than hand planer

Wow thanks absolutely amazing. I appreciate your videos.!!! I wanted to buy the set from dieter Schmidt but it's 1500 euros 😮 I'll try to make my own. Thank you for sharing. I subscribed 😁 have you tried with oak?

@littleforest

8 ай бұрын

Oh, thanx! Oak might not be a good wood for this. It should be a dence one with closed pores, like maple, beech, birch... Good luck with your screw :-)

💯💯💯💯💯💯👍🤝

How well can these fasten? Wood has very low tensile strength.

@littleforest

Жыл бұрын

Wooden screws have been in use of humanity for centuries, before iron ones overtook the stage. Maybe there are bit less strong then iron ones, yes. But if used carefully they do well and can be repaired easily. Mine are in use now since about two years and the work perfectly.

How can I get the devices to make my own screws?

@littleforest

7 ай бұрын

I do not sell the tools. But if it helps, you find a link in the text, where i sell some of my screws. Or then, you can always build your own tools!

no lathe no problem 💀

Nice shop hey do you own convex spoke shavers??? just asking

@littleforest

8 ай бұрын

No, i do not have one (yet). Have a nice sunday!

@RichardMuenzer

8 ай бұрын

@@littleforest for not having the right tools And having to think out-of-the-box I give you an A+ nice job nice tutorial thank you

Cutting the thread in 2 or 3 passes may elimat the tear out, I guess.

@littleforest

Жыл бұрын

Good idea, but if you watch close you will check, that it can't work. How will the tool be guided? Have a nice day :-)

@user-mq7fd9qe9w

2 ай бұрын

Можно в самом зубе выпилить канавку. Внешняя сторона резца удержит шаг резьбы!

Hienoa työtä! Oletko Suomesta? 👍🏻🎅🏻🇫🇮

@littleforest

8 ай бұрын

Joo olen. Terveisin Karjalasta!

Bruh