Wood turning a chef's salt and pepper holder #66

Ойын-сауық

My brother Stuart, when first left school trained as a chef, and is an excellent cook, asked me to make for him a container for salt and pepper that he could use while cooking
I hope this tutorial will guide you through the steps as how to make this.
I try to use this woodturning channel as a platform to share ideas, and to demonstrate to other wood workers the steps needed to achieve this.
I use many different types of wood in varying combinations, as well as combining this with resins, i tend to use glass cast 50 as i can use this without the need of a pressure pot.
For my finishes I use things like Wood dyes spirit based and water based, high gloss wax and
Boiled Linseed Oil - Danish oil and hard wax oil. I also like to experiment with differing textures to give my bowls a different feel to them
For my actual wood turning i use a galaxy DVR lathe 14 44 which is very versatile, which gives me the ability to turn a 14-inch bowl or spindle length of 44-inchs
Thank you very much for watching my channel and please feel free to leave comments below.

Пікірлер: 63

  • @scottstubberud1137
    @scottstubberud11374 ай бұрын

    Excellent work! I think you were wise to reduce the size of the knob. The first was bulky. Only thing I would have done differently is I would have put a burn line on the top of the knob on one lid, not on the other, to easily distinguish salt and pepper sides! I do love oak, even well seasoned I think it turns beautifully and looks great when finished. I used to have a source of oak wood pallets that I broke down years ago and have used it in various projects over the years and I am finally nearing the end of. I use it mainly for wood turning now and love it. Nothing like getting white oak that has a lot of figure in it for free! Great video, great results!! Scott

  • @thehampshirewoodturner

    @thehampshirewoodturner

    4 ай бұрын

    Thanks Scott glad you enjoyed it, I made a smaller one than this and my brother uses the bigger one for cooking and the smaller one on the table at dinner parties, and he said it always generates conversation about how unique it is

  • @paintilludrop
    @paintilludrop7 күн бұрын

    Idea is interested, yes, would add a detail on lid for salt, ring or burn line.

  • @kerstin4516
    @kerstin45164 ай бұрын

    Turned out beautiful. Thanks for sharing the trick with the piece of lead and the fixing screws through the piece.

  • @chrisgough2205
    @chrisgough22052 жыл бұрын

    "Somewhat similar" is good for us Steve - we like it!😀

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    And so do i, my brother hasn't seen it yet so I'm hoping he likes it too

  • @turningwood720
    @turningwood720 Жыл бұрын

    Hi Steve, well done and honestly presented. I am a hobby woodturner too and so I will give your project a try next time. Kind regards from Germany, Egbert

  • @thehampshirewoodturner

    @thehampshirewoodturner

    Жыл бұрын

    Glad you enjoyed it and are inspired by it, let me know how you get on with it, I have been giving it a lot of thought latey as to how i could extend this further with maybe 3 or 4 holes in it

  • @nicolastratton8192
    @nicolastratton81922 жыл бұрын

    I love the way the shiny stuff transforms the wood and really shows off the grain

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    Thanks Nicola, the "shiny stuff" is a cellulose based sanding sealer, and your right it does show off the grain to very good effect, that has to be one of the most enjoyable moments of wood turning when you apply that and you see all that beautiful grain exposed for the first time

  • @thewelshwoodman649
    @thewelshwoodman6492 жыл бұрын

    Fantastic project Steve 👍really enjoyed watching 😁

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    Thanks Tom, it was good to see you Wednesday and have a catch up

  • @SiamWoodShop
    @SiamWoodShop2 жыл бұрын

    Nice functional piece, turned out great

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    Thanks for the comment, absolute nightmare trying to get two the same, my brother hasnt seen it yet i hope he likes it

  • @oneturnatatime6309
    @oneturnatatime63092 жыл бұрын

    It's beautiful and a great idea of securing piece of wood. Thanks for sharing 👍

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    They do look nice but so difficult trying to get them the same

  • @denocro3586
    @denocro35862 жыл бұрын

    I enjoyed that. Cheers

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    You are more than welcome

  • @timponder7487
    @timponder74872 жыл бұрын

    Well done as always from your shop👏👏

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    Thanks Tim Thanks for watching and leaving the comment

  • @kenharper616
    @kenharper616 Жыл бұрын

    Excellent work young man.

  • @thehampshirewoodturner

    @thehampshirewoodturner

    Жыл бұрын

    Glad you liked this one, my brother asked me to make this and it did cause me to give it some serious thought

  • @BAILEYWOODWORKS
    @BAILEYWOODWORKS2 жыл бұрын

    Great looking pieces!

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    Thanks Chris, it is as I'm sure you can appreciate incredibly difficult to make them the same, but very satisfying

  • @robertboycewoodturningn.c.7838
    @robertboycewoodturningn.c.78382 жыл бұрын

    Very cool project.👍

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    Thanks Robert, it was fun to do and my brother just loves it, looks good and is very practical

  • @kenharper616
    @kenharper616 Жыл бұрын

    You are one of the best.

  • @thehampshirewoodturner

    @thehampshirewoodturner

    Жыл бұрын

    Thank you Ken that is extremely nice of you to say so

  • @stuarthowell2510
    @stuarthowell25102 жыл бұрын

    that looked really nice ,, if only i had one similar

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    If only

  • @markthompson6860
    @markthompson68602 жыл бұрын

    well done ,,,,,,,,i cannot make 2 of the same lol

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    Thanks Mark I even surprise myself some times

  • @bonitagoodwin5086
    @bonitagoodwin50869 ай бұрын

    I love it. This is a good idea. ❤

  • @thehampshirewoodturner

    @thehampshirewoodturner

    9 ай бұрын

    Thanks Bonita, my brother uses this all the time. Are you a wood turner and are you going to have a go at making one

  • @bonitagoodwin5086

    @bonitagoodwin5086

    9 ай бұрын

    @@thehampshirewoodturner 😆 not a woodturner. A former crochet and needlepointer. Until my friend Arthritis side lined me. Now I'm an avid KZread watcher. Woodturning. Quilting etc...

  • @thehampshirewoodturner

    @thehampshirewoodturner

    9 ай бұрын

    Im sorry to hear that a friend of mine has had to deal with this from quite a young age and i know how debilitating that can be @@bonitagoodwin5086

  • @judylucas7596
    @judylucas75962 жыл бұрын

    Very nice!

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    Hi Judy glad you liked it, good fun project

  • @DennisSuitters
    @DennisSuitters Жыл бұрын

    Very good, interesting project, I shall have to make one for she who must be obeyed, well, really for when I cook steak or chops to season them. Thanks for sharing.

  • @thehampshirewoodturner

    @thehampshirewoodturner

    Жыл бұрын

    Glad you enjoyed it let me know how you get on with it

  • @nicolastratton8192
    @nicolastratton81922 жыл бұрын

    Beautiful thanks for sharing

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    Thanks Nicola, I think Stuart liked them as well

  • @jenniemcclish3559
    @jenniemcclish35592 жыл бұрын

    It is really beautiful

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    Thanks Jennie, That oak when it's oiled does look nice. Where are you watching from

  • @jenniemcclish3559

    @jenniemcclish3559

    2 жыл бұрын

    I am from Colon Michigan@@thehampshirewoodturner

  • @teckle.turnings
    @teckle.turnings2 жыл бұрын

    Really nice, well done! 😊

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    Thanks. My brother hasn't seen it yet, I hope he likes it

  • @teckle.turnings

    @teckle.turnings

    2 жыл бұрын

    @@thehampshirewoodturner he'll love it! 😊

  • @pjbaddict
    @pjbaddict2 жыл бұрын

    Nice work

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    Thanks, my brother really liked it as well

  • @williamryan1984
    @williamryan1984 Жыл бұрын

    Excellent

  • @thehampshirewoodturner

    @thehampshirewoodturner

    Жыл бұрын

    Thank you William, My brother also thinks so, he uses them every day,

  • @cicerorodrigues9955
    @cicerorodrigues99552 жыл бұрын

    Ótima idéia. Parabéns Muito caprichada sua peça. Sucesso Gratidão

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    Many thanks for watching and leaving the comment

  • @garthkeck2003

    @garthkeck2003

    Жыл бұрын

    @@thehampshirewoodturner kkp

  • @kenharper616
    @kenharper616 Жыл бұрын

    Thanks

  • @thehampshirewoodturner

    @thehampshirewoodturner

    Жыл бұрын

    Glad you enjoyed this one, it was something a little bit different

  • @rubycler6221
    @rubycler6221Ай бұрын

    What were the dimensions of the block you started with? Thanks

  • @thehampshirewoodturner

    @thehampshirewoodturner

    Ай бұрын

    Sorry ruby but that piece has long gone, so im unable to measure it. I know i was more governed by the diameter of the pieces i can turn on my lathe, are you thinking of having a go at this?

  • @rubycler6221

    @rubycler6221

    Ай бұрын

    @@thehampshirewoodturner Thanks. I’ll add it to my list of future projects

  • @vernsteinbrecker3759
    @vernsteinbrecker37592 жыл бұрын

    Nice work

  • @thehampshirewoodturner

    @thehampshirewoodturner

    2 жыл бұрын

    Hi Vern thanks for leaving the comment glad you liked it

Келесі