Purchase Stirling Engine here - warpfivefans.com

@shawnmatheson3492

2 жыл бұрын

$530 for the example shown in video. Very cool device!

@stevealford230

2 жыл бұрын

@@shawnmatheson3492 fuh-huh-huh-huh-UDGE that. Yes, it's very cool, but over five C-notes for a heater fan just because it's cool... that's for people who have more money than sense.

@Cotronixco

2 жыл бұрын

@@stevealford230 Money and sense are not opposites.

@stevealford230

2 жыл бұрын

@@Cotronixco I didn't say or imply that they are opposites.

@Cotronixco

2 жыл бұрын

@@stevealford230 Money and sense are still not opposites.

Funny story. My father was so proud to have installed a wood stove in his old house that he purchased one of these engine-type fans for on top of it. He purchased a premium model and claimed that it made the stove look more sophisticated. He was disappointed when the brand new, rather expensive, fan did not spin but for about 5 rpm. He left it sit on the stove as a decoration though. One day I walk past it and pick it up to examine the mechanics of it. I happened to notice that there was a cellophane cover (like what comes on a new TV) on the very bottom between the fan and the stove. He removed that cover, and within 5 minutes the fan was blowing clear across the room with warm air.

@Moose1776

2 жыл бұрын

😂😂 classic

@cguy96

2 жыл бұрын

Reminds of my situation. Bought a house from my now neighbors (they subdivided and built new). When they did the kitchen remodel 20+ years ago, they put a built-in AC to cool it (there was no central AC). He loved it, but his wife thought it was way too loud and refused to use it. Come about 3 years after we buy, and we put in central AC on the first floor, so we remove the AC. First thing I see is a “Remove shipping strap before installing and operating”… on the shipping strap that is still installed. Gave it away, and it was very silent apparently.

@tuff1elite

2 жыл бұрын

Good to see you back brother!

@ColoradoCarrolls

2 жыл бұрын

Thats great, love it!

@bluebutterflywellness2273

2 жыл бұрын

Looks great! Just bought a similar one but unfortunatrely i have a recessed built in stove that leaves no surface area for fan to sit. Therefore it would be awesone to have a manufacturer create a modifed version to allow for vertical adhesion with perpendicularly positioned blades to allow the same function in this instance.

Three videos in three days, what a much needed breath of fresh air!

@geoffreylohff3876

2 жыл бұрын

Missed him while he was ill...

@colinkulasik1128

2 жыл бұрын

Glad you are back and feeling well enough to be back at making such good quality videos. Was beginning to have withdrawal symptoms while you were on the mend.

@Nate-wc4cz

2 жыл бұрын

R/hmmm

Cody, the Sterling engine was invented by a preacher. He was concerned about steam boiler explosions and he designed an engine that used air instead. Those are graphite pistons and glass cylinders for low friction.

@sammy13ificationable

2 жыл бұрын

I remember seeing a video a long while back of a kid building one out of JB weld and copper tubing, always wanted to build my own for shits and giggles. I think the channel was "MakerJ101" but I could be wrong

@Mrbfgray

2 жыл бұрын

Rare preacher who that ever accomplishes something useful! Thanks for the background story, that's interesting.

@htmagic

2 жыл бұрын

@@Mrbfgray Yup, most preachers are so heavenly minded they are no earthly good! This preacher remained humble and provided an external combution engine to help mankind.

@TheChristonline

2 жыл бұрын

@@sammy13ificationable I remember that kid doing some cool videos, I just went to check on his channel and no videos added in 3 years. Thanks though

@sammy13ificationable

2 жыл бұрын

@@TheChristonline I think he got a real job and went to college. He made some impressive stuff for a kid in his basement

Love you videos. Your description is fairly accurate except: I think the displacer is made of a light non metallic substance. The temperature difference does tend to allow the heated air to rise but, that is a tiny effect countered by the displacer. The real motive force is the heat increasing the pressure inside the lower cylinder. I am a retired chemist. Worked in an industrial lab but, as part of a local science outreach program, I used my sterling engine to teach gas laws to middle school students. Basically, heating a gas in a closed vessel increases the pressure. That pressure pushes the top pistons. As the gas expands in the top pistons it cools and is pushed back down into the hotter lower cylinder by the return motion of the piston and the displacer. For what is worth, I included a poorly written but, more detailed description of the physical chemistry of the system below. I believe I was a good scientist but, never a very good writer so for what it’s worth…. Ideal gas law is PV = NRT. P is pressure, V is Volume, N is the amount of gas, R is a constant to keep the mathematical terms all the same, and T is temperature. Seems complicated except the amount of gas (in this case air) in the system remains constant, the gas constant is also constant. So simplifying the Pressure and the volume varies directly as a function of the temperature. In the big cylinder where the gas is heated the volume is also constant. So heating the gas increases the pressure or mathematically since V, N,R are all constant then P=T. The pressure increases in dirrect proportion the temperature change. If the lower cylinder was sealed that is all that would happen. The increased temperature would just cause the gas pressure to increase. However, the bottom cylinder isn’t sealed but, is connected to the upper cylinders. The increased pressure in the bottom cylinder pushes the pistons in the upper cylinders. In the top cylinders the pressure pushes the piston. As the piston move upward the volume of the cylinder increases allowing the gas to expand. As a gas expands it cools and further cooling occurs because the upper cylinders are further from the heat source. The purpose of the displacer is to help move the cooler air at the top of the piston back down to the the bottom of the bottom piston. Why a gas cools when it expands is a longer and for me a much more difficult explanation. But, most refrigeration is based on the fact that gases cool when they expand so please take my word for this. Again love your videos so keep them coming.

@100GTAGUY

8 ай бұрын

Yeah trying to explain how hot expanding gas eventually cools itself does get a bit complicated and convoluted without a full on lecture plan lol Without getting into Boyles law, bernoullis principle, and the other laws of thermodynamics you cant say much to anyone. Trying to explain how they used 600+ degree air to cool jet engines down is even more fun haha, all the while the compressor is simultaneously heating and cooling intake air via compression, expansion, and airflow manipulation using bernoullis principle and multiple airfoil designs to fuether control temperature and density.

That is an awesome gadget! I also wanted to say I am sorry for the loss of your father Cody, I have been a fan of your channel for a long time and I really felt for you when you posted about it. After that video it compelled me to patch things up with my Dad, him and I hadn't been speaking for a while, but I didn't want to waste any more time not being in touch with him. We have to make the best of the time we have with the ones we love before its too late. Glad to see it seems like you're doing a bit better. Cheers from Ohio!

This was one of the “coziest” videos I have seen for a long time :) Thank you Cody and I am glad you are feeling better.

A Sterling engine has two strokes. Stroke one is When the displacer is lifted the air rushes down towards the hotplate and expands, driving the pistons up. The second stroke is when the displacer moves down and displaces the air upwards allowing it to cool, contract, and suck the Pistons down.

@jTempVids

2 жыл бұрын

Well said. I can understand your explanation easily.

@cartertrefz4585

2 жыл бұрын

@@robinhaas6895 exactly👌🏼

I've always enjoyed Sterling engines, found them very fascinating. And what a great way to move air around the shop. Blessings

No one else is delivering this much diverse content like Wranglerstar.

I so genuinely love these! Years ago, I purchased one for my grandfather's stove and it took a small wood stove that gently warmed his family room in the basement, turning it into a real furnace that could make the entire basement and 1st floor a warm and tasty paradise after just a few minutes. All from a simple radiator-like device! So neat!

There's something very cathartic about watching a mechanical object run so smoothly and flawlessly. Also I see the watch buying bug seems to have struck again, some sort of Sub with a blue bezel and a Daniel Craig bond nato?

Sometimes you just crack yourself up. That is an exquisitely designed piece of engineering. Thanks for sharing it with us.

Yup, way cool Cody, great find!! More importantly you really are sounding much better, much more like yourself!! Thanks again.

It needs another alternator. Nice piece of machinery!

This is why I subbed many years ago, so genuine. Enjoyed laughing with you as if I was there. Beautiful machine.

Wranglerstar! So glad you added a link to them in the comments. Thank you, and hope you are feeling better!

Interesting use for the Stirling Engine! You can tell it has excellent quality built into it and made with good materials. Thanks for the video!

Dual power pistons, can you imagine that? I'm having flashbacks to the alternators. The first thing this brought to mind was the candle heat powered angel ornament. Its beautifully engineered Cody, I'll have to remember this if I ever get a wood stove.

Good to see you back on your feet and in high spirits!

Got 2 of these on my stove! they make a tremendous difference! Glad to see you are recovering well! 😁

These are the future for offgrid and tinyhousw living. Thanks for the video wrangler

This video, your ram pump video and your wood stacking (pic-a-roon) video are my favorites so far. Physics and practical farm boy uses of natural science. 👍

Wow I didn’t know it was possible to fall in love with an object. Cody I’m not talking about you I’m talking about me! 😂

Good to have you back and glad your health is getting better.

If you're using this with a Catalytic stove instead of a standard one, put 3 spacer washers under it in a triangle pattern to create an air-gap. Two at the front near the blade, and one at the back in-line with the crankshaft. Not doing so can damage the engine, oh, and oil/clean it twice as often. I learned that the hard way.

Hey Cody, I just watched another KZread video explaining how these engines work. Apparently if it's running on top of a warm stove and then set on a cold surface such as ice, it will slow down, stop, and run in reverse. Just a cool little fact I learned and wanted to share.

@TheGreenNewSteal2025

Жыл бұрын

I’d enjoy seeing this experiment now that he is buried in snow.

When you end your videos saying, "May God bless you and your families." it always tugs at my heart. idk why.

I have one of those thermal conductive fans to improve the performance of my Buddy heater. Not as beautiful as this, but amazingly effective. A ton of heat just goes straight up where it is not needed. This helps move the air around a bit for better dispersion, less hot spots.

@ollieb9875

2 жыл бұрын

Yes, we have one for the wood burner it works with a piezoelectric element which creates electric to power the fan when one side is hotter than the other 👍

@edgelite

2 жыл бұрын

I have the same setup as you. Buddy heater with the electric version of these fans

Designing a Sterling engine was the first project at my mechanical Engineering study. Just amazing that they work on something as easy as a tealight.

I work at a woodstove company, and I can assure you that in no way do we fear this device....

I have always wanted to see someone pair a sterling engine with a pellet stove. The sterling engine would drive the pellet auger removing the need for electricity to keep the stove running.

@wideyxyz2271

Жыл бұрын

The only problem with sterling engines is they don't produce very much power. Not much torque either..

@mikeries8549

Жыл бұрын

Brilliant! Now power up the computer with spc control to control the auger. Next figure out how to turn it on an off with a thermostat. You must be a enjineer.

That's a really neat peice of precision engineering. Glad to see you back up and running Cody

Getting one for our family this season thank you wranglerstar!

Enjoyed this so much I went back and played the closeups at 0.25 speed.....remarkable! Thanks so much for sharing this!

Professional homeowner. . . (Starts explaining how a fan works.) (Pauses) . . Start’s questioning reality! 🤔

This is the accuracy you get with the metric system Cody!!!!! Glad you’re feeling better. Andrew (UK!)

The first practical use I've seen for one of these engines.

I’ve always been confused by the sterling heat engine. I can’t say I’m less confused but what a cool video anyway. Definitely a great quality device. Thank you Cody for your amazing content. Have a wonderful thanksgiving and a merry Christmas for you Mrs. W, jack and of course the sweet loaf.

A stove top stirling engine attached to a generator would be a game-changer. It's old tech, very doable.

Lmao 🤣🤣🤣 thanks for the laugh Cody! I was extremely well versed in Sterling engines and am now much less so! This was great and I hope you know we love you for your self awareness

I've been fascinated by these for years now! Keep up the great videos man much love prayers and respect from Tennessee!

I'm glad you sound like you are feeling better. How is everyone else doing? Can you tell us where you got the little fan, please? I'd love to put one on my wood stove. Thanks!

Glad you’re back and still e joying sharing your love for cool stuff like this.

You are sounding much better Cody. If I remember right, this is the 2nd time you've gotten Covid? Praying you have bulletproof antibodies to protect you from future infections.

@materialclassified

2 жыл бұрын

Long haulers are people who continue to come down with the symptoms of C-19. I know a rancher that has had it 4 times now.

@benjamingriffin1495

2 жыл бұрын

Corona virus results in similar immunity to the common cold where the immunity lasts for a very short time. Recurrent infections is the norm.

I understood your explanation of how those fans work. I was just talking about them yesterday and we wondered how it works. Now I know.

I have a good friend living in the Bull Mountains of Montana who has a wood stove to heat his tiny house build. This fan sure looks like a good solution for our winter weather.

I got my little brother a engin like this that you put on top of your coffee cup and when the motor stops the coffee is just the right temp :-) thank you Cody you have a beautiful piece

Natural laws of thermodynamics. You did a great job, thanks for the younger people, yes .

I have seen these as a "Children's" STEM Project/Kit. (Science, Technology, Engineering and Math) But I usually see them with a Safety Fan Grill. Great for distribution of Heat in a Large Area, and really cool to watch!

Wow, Cody. You explained in 2 minutes what a college professor taught me in 3 semesters of college physics!.That is a really neat machine.

@nicholasmartin5446

2 жыл бұрын

you wern't paying attention in class were you?

@awac4577

2 жыл бұрын

@@nicholasmartin5446 Probably not like I should've been. Took me an extra semester before I started understanding what my foreign professor was even saying.

@minhducnguyen9276

Жыл бұрын

@@nicholasmartin5446 Yep I learned it the hard way. While the first few classes are boring and just the repetition of the old stuff, if you skipped a few classes more it jumps straight to the new stuff you'd never heard about.

The displacer is used to cause the temperature differential (the displacer is likely made of a heat insulator) when it's at the down position (closest to the base) it blocks the heat and the air inside the chamber starts to cool causing the pressure to drop. Which in turn allows the power piston to move down. At that point the displacer is now in the top position and isn't blocking the heat, exposing the air to the hot side. This increases the pressure and causes the power pistons to move up and then it repeats. The air doesn't push the displacer up or down it's just a very loose fitting piston to displace the air from the hot side to the cold side, to cause the air to expand and shrink.

@andrebartels1690

2 жыл бұрын

Yep, couldn't have said it any faster or better. 👍

@ksherwoodb

2 жыл бұрын

@@andrebartels1690 pistols are also offset ninety degrees from the displacer on the crank shaft. The flywheel is essential. The fan blade in this case

@ksherwoodb

2 жыл бұрын

Pistons

@jamesbuildwise9141

2 жыл бұрын

@@andrebartels1690 thanks!

@jamesbuildwise9141

2 жыл бұрын

@@ksherwoodb Indeed they are!

It’s refreshing to see a person who is not afraid to stumble in the public eye….your videos are brilliant common sense, which is a breathe of fresh air today in a world of senseless dominance. Thank you.

That is the coolest stove topper I've seen. Glad you are feeling better. My taste and smell are still weak from CV19 that I got around Easter.

I’ll have to be on the lookout for one of those!

Always loved when form follows function and you end up with a beautiful machine…

I really appreciate the fact that you share this information in plain english. Thank you bro. Godbless you aswell👍

Glad to see that you seem better!

Glad to see you’re feeling better Cody!!

Seriously, you explained it well and I understand how it works! Thank you for showing it to us!

My father was so proud when he finally got his Barometric CLOCK. Fine wood, brass and glass construction. Self running ( perpetual motion) has a wedge arm under case to stop it. I'm sure that you can find one some where still.

Now all you have to do is make some copper coils or magnets strategically placed and then you can start storing some of its kinetic energy into a battery bank or charge your phone. I guess if you made a big enough one you could power a house. Idk it looks beautiful and is masterfully built. I’m glad I ran across this.

This fan and the ram pump both amaze me. So cool.

I'm glad to see you're feeling better

That is a beautiful Sterling motor. They work off of hot and cold. They can be hours of entertainment. For no animation you did a pretty good job of explaining how it works👍

Good to see the Rolex back on the wrist Cody! I guess just like the Benchmade the good old standby always ends up ousting the shiny new toys. I get it though, I'm a creature of habit too. Glad you're doing well and I hope the same for the rest of the family. Missed you while you were gone.

@badmatt4162

2 жыл бұрын

would love a video on it!

That is the most neatest thing I've ever seen in a long time and the thing about it is that it also makes it a great tool into explaining how and internal combustion engine works for those that have no idea Cheers Anthony

Thermodynamics students appreciate your attempt. No complaints. Love you videos. And most of all, your passion for being ready.

I like how you paired the two tone stainless steel Rolex with the Warpfive with brass and stainless steel.

Been using one of those for the last couple years .after seeing this now I want to build one so I can see the internals. That's awesome

Very excited to use my new tipi tent with wood stove this weekend. I’d imagine that a stove fan may even help warm the tent. Perhaps I’ll give it a shot. I’ve been fascinated with those fans for a while, anyway. Great vid! Thanks & it’s great to see you doing well.

@LightfeatherxX

2 жыл бұрын

I use a fan in my hot tent, it definitely does help. Most stove fans are a Peltier circuit (generating an electric current from the difference in temperature between the top and bottom of the fan), but I imagine a Sterling engine would work as well, if you could find one small and cheap enough to justify packing on a camping trip

@prepperpov5852

2 жыл бұрын

@@LightfeatherxX Thanks for the input. It may be cheating but I already found out how beneficial a cot is to sleep on. Just being slightly elevated makes me so much warmer, even though the ground is ultimately fine. I’ll give the fan a shot, though. Just purchased a new mattress and also plan on getting new tires for my vehicle but once I have those taken care of I’ll have some more spare cash and do research. I appreciate the info!

@LightfeatherxX

2 жыл бұрын

@@prepperpov5852 No worries! Yea, a good cot can definitely make the difference between a cold sleep and a nice comfortable sleep. One point of note, how useful a stovetop fan is in your tipi depends on how big the tipi is, and the height of the peak. A 4-8 man tent will benefit more from the forced flow of air then say a 2-3 man. It's main benefit is keeping the hot air from stagnating at the top of the tent, but (for me at least) it does make a noticeable difference to the warmth felt near the ground in my tent

I’ve been trying to figure out how to use stirling motion for alternative energy for years. This gave me an idea of how to use my spring fed ram pump and a stirling fan to cool my wood shop here in the south.

Absolutely insane price. I suppose if I received it for free, I would think it was "really cool"

@jesus.maryandjoseph8880

Жыл бұрын

Agreed! We live in Canada, so with a 38% dollar conversion on our Visa, taxes, duties and shipping, this would be a $900-1,000 stove top fan! :-(

Thins thing is awesome, I love hose engines, I still wonder how they are not around much more for cheap range extending on boats with electric propulsion for instance or as a heater booster etc.

The only cycle more efficient then the Stirling cycle is the Carnot cycle but the Carnot cycle is theoretical; Stirling cycle is actual. Not only what you have is a beautiful piece of art, but it's completely functional too. Not often do you see both at the same time. Cool stuff, Cody. :)

You did a fine job of explaining the function. ☺

This is the type of content I have missed from this channel

It appears you are feeling better. Welcome back!

Somewhere in the mountain of old papers downstairs is a set of mimeographed instructions for a DIY sterling engine. Makes me wonder if I could build one and mount a fan.

Awesome, this is classic dad'splaining. Super neat device. I know mechanisms like this continue to be invented today in the pursuit of energy conservation. A symbol of the industrial revolution.

I have a 1/4 scale Ryder Ericsson I put together from casting many years ago. A late friend of mine had a full size version.

Cody I could see myself setting by the fireplace in my wooden rocking chair with that miniature Stering gadget with what looks like a tiny helicopter blades keeping me warm through the winter months. 👍

That's a very cool little engine. I'm an engineer so things like that always fascinate me.

I had suggested the stove fans a while back and you told me it was a gimmick glad you finally tried one out

Another really cool thing about Stirling engines is that there's so many differrent designs of them all working off of the exact same basic principal. It's a really good example of just how many different machines can be made to do the exact same task on the exact same physical laws, while differing drastically in construction method.

Lmfao..your explanation was so cute!!😘

Hahahah! I notice all of the East Coast Heating Guys chiming-in. LOL!! Y'all are the "original" Steam Reamers. The very first, "Old Dead Guys" reside "over there". Respect!!

I'd love to buy one of those just to look at but the electric generator versions work so much better And start spinning on their own When they're hot

Super cool gadget! Looks like they are built to last a long time.

Without question, this is the best video you have done. Hysterical in the best way possible.

I have one of these that runs on the heat given off by a mug of coffee. Beautifully smart but power companies don't really fear them as their output is hardly more than the input energy and barely any torque. Although they're just enough for a simple fan like this, nice explanation though ;)

Neat video, knew about Sterling engines which turn external heat to mechanical energy… didn’t know this had been adapted to drive a fan to circulated air on metal stove … neat technology… immune to EOTW catastrophe events and very steam punk… very cool!

There is a huge Stirling Engine near me that generates power. It has a 30 ft reflector dish made of multiple plates the engine is mounted on the center arm and runs off heat of the sun. Pretty cool, looks like a huge flower.

I built one of these in Highschool metal fab class, machined it all myself. Very cool and simple motor. Never though about putting it on my woodstove...

I use a similar fan on my stove in the hot tent. Makes all the difference in there!

Glad you are on the mend Brother!

I have the same fan! Or rather a slightly different model but from the same manufacturer. A beautiful piece of engineering.

Thank you for sharing. Happy Thanksgiving!

Super cool engine! If I ever get another wood stove (or coal) I would get one to put on top. What a great idea!

I must say when I first learnt about the sterling engine, it was hard to understand because they used the beta type sterling engine which was the simplified version of the alpha type sterling engine. Many components of the alpha type engine have been combined to make the engine more compact in the beta type design which makes the explainations harder to understand.