Remember the rc car from toy story😳

@RDsRCReviews

4 жыл бұрын

I've not seen that movie so no I don't lol

I like this car I need to get one it's good that wltoys have finally worked out how gearing works they have made a car that's quick stable and drivable

@RDsRCReviews

4 жыл бұрын

Yeah it is good though I'm not sure if I'll switch it to brushless yet. I may wait for upgraded gears kits to become available first.

This thing is going to be SUPER popular

@RDsRCReviews

4 жыл бұрын

Yep, the amount of views I'm getting is proof enough of that.

@jimmieparker8093

3 жыл бұрын

Just ordered mine..😁

Dont go 3s, esc will die. Somone else tryed it, insta death for the esc.. nice video, i have ordered 2 of theese :)

@RDsRCReviews

4 жыл бұрын

Yeah I'm not planning on trying 3s unless I upgrade to brushless. Thanks so much for the info!!!!

I've been tracking my package this whole time!! It's almost here. Can't wait to rip that up, my a959B is hard to control and I'm always crashing an flipping, hope this one's more stable, it looks it that do sure. Great review!!💯👍

@RDsRCReviews

4 жыл бұрын

This one is better than the 959B. Thanks for watching!

@4DollaSignaken

4 жыл бұрын

The 9x9 series had a steering issue (x is variable because There are 969,959 and 979 models)

Looks like a good fast buggy, I been interested in this one for a couple weeks... Good look at it Ryan

@RDsRCReviews

4 жыл бұрын

I hope you get it soon too David!

@AW-Luke

4 жыл бұрын

Mine was supposed to arrive two days ago before I went on holiday, and it’s still not arrived. ☹️

Great video Love it have one coming in the mail can't wait

@RDsRCReviews

4 жыл бұрын

Awesome and thanks!!!

My first run I also had the front wheel come of i lost the bolt plus the small pin that gose through the drive shaft at the hub... I changed all the wheel nuts because the ones that it comes with don't screw down to the locking part of the nut

@RDsRCReviews

4 жыл бұрын

Yeah this seems to be a common problem so I'm going to add some locktite

Awesome video. Just ordered this today, and the 959b.

@RDsRCReviews

4 жыл бұрын

Awesome!!!! You'll love both of them especially the 144001.

@Olsen81

4 жыл бұрын

I did the same🤩 Awesome Car!!

the drivesthaft angle looks too extreme does that cause problems

@RDsRCReviews

4 жыл бұрын

Nope, it is just fine and I'm not sure what you mean. It is the same as any other car like it.

Are XKs and WLtoys the same thing and same build quality? Thanks :)

@RDsRCReviews

4 жыл бұрын

XK is the "premium" brand of WLtoys.

The motor is 550

@RDsRCReviews

4 жыл бұрын

yeah it sure is :) I misspoke though there's not much difference between a 540 and 550 motor. Years ago we used only 540 sized in the Tamiya kits.

I just ordered one for the grandkids. Was getting tired of them breaking my good cars!

@RDsRCReviews

Жыл бұрын

These are good cars because they contain a lot of metal so they aren't easy to break but be sure to locktite the wheels nuts!!

It's a great car, great review Ryan. Man mine should be here. It looked so cool, I had to buy it.

@RDsRCReviews

4 жыл бұрын

I can't wait to see your review Donnie!

a dream car to have

@RDsRCReviews

3 жыл бұрын

The new 104001 is even better!!

You want rpm nylon upgrades for bashing. You want flexibility in your car. Metal always bends even the cnc machined stuff. Someone put 3s on that system and it took it and went 44 mph. Some crazy guy is doing 90 with that car. Breaks stuff constantly. Like i said most of the 10th scale traxxas handle 4s all day without things breaking unless you hit a brick wall at 50+mph. The drivetrain holds down the power beautifully. Ive had mine for 3 years and only broken a camber clock from hitting a dumpster at 50mph

@RDsRCReviews

4 жыл бұрын

Well Traxxas are also better built and cost 5x as much so they should handle 3s with no issues :)

@familyman8644

4 жыл бұрын

@@RDsRCReviews mine handles 4s max 10 system with 2650 kv 3674 motor with no issues but I run all rpm parts including transmission case. It does 90 on 8th scale grp slicks with 17mm hub adapters. Im good with that speed. I know phillip jolley doing 170 with a 4×4 slash....crazy

@familyman8644

4 жыл бұрын

@@RDsRCReviews its only 3 times as much unless you get the ultimate slash

Can someone please help me I just got my 144001and every time I press the throttle it doesn't do nothing but once I let go of the throttle it starts going

@RDsRCReviews

3 жыл бұрын

Try adjusting the throttle trim and see if they fixes it.

I think it would be a cool idea if you made a video about a brushless swap. I think I’m gonna buy one of these for a cheap beater. Crazy good deal, amazing video btw

@RDsRCReviews

4 жыл бұрын

I actually was planning on dong that and I have all the parts to do it including a new steering servo but I've heard that the gears have issues handling brushless so I'm reluctant now to do it.

i got one, it seems a bit slow compared to the videos. does it have a slow/trainer setting that might have gotten flipped on?

@RDsRCReviews

4 жыл бұрын

Try turning up the throttle trim all the way or until the car starts to move forward on its own. The throttle trim may have be set low by accident. Maybe you bumped it or someone at the factory did. That's the only option I can think of.

Nice review, thanks! 👀👍🏻 Another thing I have noticed is the nylock wheel nuts are not what I would call really great quality so simply replacing them with better Nylok nuts will help to retain the wheels without having to use loctite. I also try not to reuse the Nylock nuts more than a couple of times.

@RDsRCReviews

4 жыл бұрын

Thanks for the great advice!

@RCModSquad

4 жыл бұрын

RD's Drone Reviews I had that exact problem with an FY03h and I noticed every time I put the wheel on it fell off faster. I had a long bolt that was the correct size so I screwed that nut onto it and there was almost no resistance. A good quality Nylock nut almost requires a wrench once the Nylon hits the bolt. Truth is I think some of the cheap ones are plastic rather than Nylon. Thanks again for the great videos. 👍🏻👍🏻

I already know what will be next. So far we have Wltoys 12428, moreover, we show it on our channel.

Wow, that's fast. Nice review Ryan!

@RDsRCReviews

4 жыл бұрын

Thanks Marcus! Maybe I'll just send you a car when I send back the Fimi :) you need a better car than the HBX.

I have this and a 979b do you think I could put the 979b motor on it? And would that add any power? Lmk I’m new to this all

@RDsRCReviews

Жыл бұрын

No because it is the same motor we the 979B. They both use a brushed 550 motor with the same amount of turns. You would want to convert it to brushless for more speed but it is difficult to get it apart and get the pinion gear removed due to the super glue they used.

Good review. But I wouldn't recommend charging lipo batteries on more than 1C. So for example a 1500mah lipo should be charged at max 1.5A. That is if you want your Lipo to last as long as possible and you want to reduce the risk of fire when charging. Lipo's are cool and very powerful but need some extra safety precautions in order to be safe.

@RDsRCReviews

4 жыл бұрын

You can never be too safe which is why I have a bat-safe but I've never had an issue charging at 2c but I never exceed 2c. Some charge at 3c. 1c is awfully slow. Most people charge at 2c.

@Tomberland84

4 жыл бұрын

@@RDsRCReviews I personally don't go over 1C but that is ofcourse a personal choice. The extra time gain is not worth the extra risk for me. Everybody I know also charges at 1C, but I guess 2C is not very extreme also. 3C might be more dangerous. Especially with older lipo batteries.

@RDsRCReviews

4 жыл бұрын

@@Tomberland84 I was just asking my friends and they always charge at 2c. I've never heard that 2c is dangerous but of course any faulty lipo is dangerous to charge no matter what amps.

@Tomberland84

4 жыл бұрын

@@RDsRCReviews That's totally true. 2C is not too dangerous indeed.

@radiocontrolled9181

3 жыл бұрын

@@Tomberland84 I am like you, 1C maximum charging rate. Normally 0.75C. I have Lipos which are still perfectly flat and retained same capacity like new . . . after 5 years! I always store them at 3.8V per cell. If you're not charging batteries on site, what's the use of charging them at a fast rate? If you're at home, start charging earlier at a lower current.

Good review Ryan, thanks for sharing. I like it!!!

@RDsRCReviews

4 жыл бұрын

Thanks DJ! I'm off to the eye doctor now.

I believe the motor is a 550.

@RDsRCReviews

3 жыл бұрын

It is! I mistakingly said 540 out of habit since that's all we used to use years ago.

Can i upgrade the battery as long as I stay 2s?

@RDsRCReviews

3 жыл бұрын

Tell you sure can

I may have missed it, but are the axle gears metal? Or still plastic?

@RDsRCReviews

4 жыл бұрын

I believe they are metal but I'm not certain.

@jasonbricker3310

4 жыл бұрын

They are metal I have taken apart and replaced two of them

Okay, That RC car Do you recommend it?

@RDsRCReviews

3 жыл бұрын

absolutely!!

Just bought one! Cant wait to rip it!!

@RDsRCReviews

4 жыл бұрын

Awesome! It is great!

What is the wheelbase? Can we fit any other lexan body?

@RDsRCReviews

2 жыл бұрын

I'm not sure but the BG listing should have that info. You should be able to fit other bodies, yes, but you may need to punch new holes in it.

How long does one battery last at full charge- sorry if I missed it in the video.

@RDsRCReviews

2 жыл бұрын

I don't give a run time for cars because unlike a drone there's so many factors that greatly effect the run time. For instance, how fast you drive it and how often you stop and for how long. That being said you'll have no issues getting 15 mins.

@TheSquirrelRCchannel

2 жыл бұрын

@@RDsRCReviews thanks for replying- as a rc plane pilot I’m a bit of a noob towards all this!😂 15 minutes sounds fantastic

@RDsRCReviews

2 жыл бұрын

@@TheSquirrelRCchannel You're welcome!! Purchase link to the 144001 is in the video description.

30 bucks just bought one

@RDsRCReviews

4 жыл бұрын

$30 for the buggy? If so that's crazy cheap.

@DailyStreamerCutss

4 жыл бұрын

Wait what? Where did you buy it for 30$? I keep finding over 90$ Edit : can you please reply , im so lazy waiting my birthday for money so i can buy it ... lol

@h1z289

3 жыл бұрын

Bro where from only 30 bucks

Its nice for the price but womt take anything compared to a traxxas rustler or slash vxl . Good beginner car for my 6 year old. I seen someone jumping that 5 feet in the air and bent those shock towers to hell and broke off the wing. Its not for bashing but good for smooth pavement. Like you said its built from old 80s leftover parts. Im surprised its ball bearing but zinc is soft. Youre right keep it on 2s. I've seen people run 4s on this with hobbywing max 10. Im thinking about putting my velineon system I have laying around. Have to mount receiver in the wiring. You need wheel upgrades and all electronics with gyro or built in gyro like tqi system. Im having hard time deciding. If i didn't already have a tqi and velineon system laying around id just get a 180 dollar xl5 rustler and add my electronics but for extra 100 bucks mise well get vxl and have extra set of electronics for backup. I run max 8 system in my 2wd speed stampede that does 100

@RDsRCReviews

4 жыл бұрын

It isn't meant to compete with traxxas but for a beginner at this price but you don't often get this quality at this price. Yes, metal can bend and is heavier than plastic but I prefer metal. Can always just bend it back rather than snapping and breaking like plastic.

The Rc sailors had their wheel fall off also same wheel I believe

@RDsRCReviews

4 жыл бұрын

Yeah it's common though can be easily avoided with some blue locktite. I wish I had known that before this review lol

@jasonbricker3310

4 жыл бұрын

Yes, mine unfortunately fell off also shortly after getting the car. I have found that locktite helps but I have still lost a few. Get an extra set for cheap peace of mind: www.ebay.com/itm/174371215996

what is the wheel hex size?

@RDsRCReviews

4 жыл бұрын

I'll have to look but I'm currently in the process of moving so I can't easily access the car to check. I'm sorry!

@jasonbricker3310

4 жыл бұрын

www.ebay.com/itm/174371215996

@brewtownonesix

3 жыл бұрын

12mm

At 0:39 i dont know whether it is because im british or because im stupid but have no idea what u were saying?

@RDsRCReviews

4 жыл бұрын

"We will discuss". Was fairly clear but I do have a tendency to mumble at times but I'm working very hard to stop that. Sorry!

@guybreakey1799

4 жыл бұрын

Thankyou

I have a little different stock ESC for this RC. It said 60A carbon brush regulator. Do you think it can handle 3S battery without overheat ?

How much run time do you get? 20 mins?

@RDsRCReviews

4 жыл бұрын

Yeah thereabouts

Will it fit in a back pack is the question hear

@RDsRCReviews

3 жыл бұрын

It most definitively will

@Happygrowercbris420

3 жыл бұрын

@@RDsRCReviews nice

reallyyyyy goood INTRO

@RDsRCReviews

4 жыл бұрын

Ty

8:25 jajaja you put it from the other side bro jajaj

@RDsRCReviews

4 жыл бұрын

Ahh yeah I was just putting the body down lol. You can't actually attach it backwards.

@panzer760

4 жыл бұрын

@@RDsRCReviews yep

How do you turn it on

@RDsRCReviews

2 жыл бұрын

Lol really? I believe there is a red button on top of the esc/receiver that you press.

Can anyone help me out here please? I’m thinking of getting one but the last RC car I had was Nitro, what does it mean by 2s or 3s? Any help would be much appreciated thanks

@RDsRCReviews

4 жыл бұрын

The "s" number refers to the number of lipo cells. Each lipo is 4.2v when fully charged so 2s fully charged=8.4v. 3s=12.6v and so on. Hope this helps!

@shanethrelfall416

4 жыл бұрын

RD's Drone Reviews Thanks!

Still waiting on mine. I hope the gears are not garbage like the A959.

@RDsRCReviews

4 жыл бұрын

Me too!

@jasonbricker3310

4 жыл бұрын

I’ve had to replace the front diff in both of mine but that is with heavy dirt drift use

It's good on sand? I mean... I'm a little afraid to take it on the sand, could I have some problems then?

@RDsRCReviews

3 жыл бұрын

I've never taken mine on sand but what is your concern?

@giosue_222

3 жыл бұрын

@@RDsRCReviews sand in delicate components, such as in the engine, I fear it will be damaged. To clean it I thought of using compressed air like for computers, but I don't know.

@RDsRCReviews

3 жыл бұрын

@@giosue_222 yeah I understand that. I used to use foam motor covers to protect the motors but then the motor gets too hot. Best bet is to just not run it in the sand.

@giosue_222

3 жыл бұрын

@@RDsRCReviews Right, thanks a lot. One last question, the supplied charger is USB, can I connect it to the plug of a mobile phone charger? Thanks again and sorry for too many questions P.s. I subscribe ;)

@RDsRCReviews

3 жыл бұрын

@@giosue_222 thanks and yes, any USB outlet will work but a 2.1amp will charge must faster. Best bet is to get a cheap hobby grade charger like an IMAX clone.

I have never had a peoblem with the tire bolt coming off...

@RDsRCReviews

2 жыл бұрын

Maybe they fixed the issue since then or I just got really unlucky but I seem to recall others have the same problem. Thankfully it is easily fixed with locktite. I did not have the issue with the 1/12th or 1/10th scale version's.

Awesome video I am definitely subscribing. This truggy by WL-Toys Looks like twice the price. I was gonna say $140-160 but 80 dollars ? That’s a Fucking steal. I would definitely upgrade to a brushless setup because to me The brushed motor setup is a deal breaker. Well I guess WLToys was going for a cheaper price point because a brushless setup was inconveniently too expensive. So to keep the price down they used this method which I think is good. I am thinking about buying this because I can alway go back later and upgrade myself. It’s just a nice sharp looking Truggy. All metal too including a Aluminum chassis I am blown away but that price.

@RDsRCReviews

4 жыл бұрын

Yeah, all of your points are spot on! I just ordered a new servo with the 3 pin connector so I can do the brushless upgrade. I have a 3300kv motor and cheap ESC that I'm going to put in it. I also have a new radiolink TX/RX coming so I can film the brushless upgrade soon. I can't wait to see how fast it is then. I have a coupon for the buggy in the description. If you decide to order it please consider purchasing through my link. It really helps to support the channel. Thanks!!

Hi, Does charging the batteries with the included charger break and damage the batteries or does it just charge slowly? If you say that it only charges slowly but there is no harm, it is fine for me. but if you say that the charger that comes out of the box will break the batteries, I can buy an extra device.

@RDsRCReviews

3 жыл бұрын

It should charge ok just slower than a cheap hobby grade charger BUT the stock charger may not charge as accurately so you can expect shorter drive time and possibly a shorter battery life. The stock charger may not balance the cells as well so that will effect the run time. Also keep in mind that it is imperative to keep lipo batteries as storage voltage when not in use for more than a few days and the provided charger isn't capable of storage voltage charging. Long story short, you should without a doubt invest in a good charger. Most of the cheap IMAX B6 clones are really good.

@mehmetaliatik8205

3 жыл бұрын

@@RDsRCReviews It seems that buying a good device will be the most logical move forward. Thank you very much for your interest. I'm following your channel. I wish you good work.

@mehmetaliatik8205

3 жыл бұрын

@@RDsRCReviews I want to ask one more thing. Wouldn't we get rid of such troublesome charging and expense by installing lion batteries instead of lipo? So is it necessary to use lipo?

@RDsRCReviews

3 жыл бұрын

@@mehmetaliatik8205 possibly though Li-on tend to be heavier and lack the punch of lipos.

@mehmetaliatik8205

3 жыл бұрын

@@RDsRCReviews This is my first time using lipo and the truth is I was a little scared. It is said that it should be charged with extremely sensitive devices, even in a special bag. I even think about giving up, I didn't know that the lipo battery was so risky anymore.

Is the spur gear metal??

@RDsRCReviews

4 жыл бұрын

I don't know. I wanna find that out as well.

@jasonbricker3310

4 жыл бұрын

Plastic

How are you running lipos with a brushless motor

@RDsRCReviews

4 жыл бұрын

Brushed motors can run off of 1-2s lipos no problem. A 2s lipo is the same voltage as a 7 cell NiCD pack that we ran years ago on brushed motors.

When the battery is low, it shut up automatically or advertise me?

@RDsRCReviews

4 жыл бұрын

neither, it'll just start to get really slow and then stop moving.

Will be interesting to see how long this is on the market before LC Racing complain. WL have made a few good machines in the past, albeit copies of other gear, which has seen them come and go quickly with no parts support afterwards :(

@RDsRCReviews

4 жыл бұрын

In China clones are acceptable so that's doubtful and it is very likely they have permission to do this because of all the premolded parts at the factory. They likely struck up a contract to use this same parts to build their version of the same buggy.

@badhamster9300

4 жыл бұрын

@@RDsRCReviews Very unlikely, WL Toys have already had other clones of theirs (UAVs especially) removed from sale (their version of the Traxxas/LaTrax Alias being a well-known example). My L303 is another example. Yes, in China clones are the norm, but that doesn't mean they have any form of permission to do so.

@RDsRCReviews

4 жыл бұрын

@@badhamster9300 it is very likely that the parts are all from the same molds but who knows if they have rights to the design. Another guy on KZread actually goes into depth discussing this very issue between WL and LC in regards to this car. I can't remember his name though. It's the guy that did the brushless upgrade.

What charger do you use?

@RDsRCReviews

4 жыл бұрын

IMAX B6AC

what's with the hand?

@RDsRCReviews

2 жыл бұрын

Huh??

It's a 550 motor

@RDsRCReviews

3 жыл бұрын

That is correct. You are at least the 3rd person to point that out in these clients. It was simply a slip of the tongue. Not really a big deal a the end of the day.

Does anyone know what the wheel diameter is?

@RDsRCReviews

4 жыл бұрын

I'd have to measure them for you.

i love your place

I'm aware that I made a slip of the tongue, it is a 550 not a 540 motor. As you can see in the comments below that this has been pointed out numerous times already and no longer needs to be mentioned :) If interested you can pick it up at Banggood with 2 batteries for $88 after applying code BG074af4 at checkout. Exp 6-30-12 www.banggood.com/custlink/mvDhjzCbl9

This or an sg1602 mean it is metal but it is brushed btw how long did yours last and did you have to buy parts

@RDsRCReviews

3 жыл бұрын

I would pick this because it is bigger, has much more metal parts and it can easily be upgraded to brushless for cheap.

@hobbygrade1.042

3 жыл бұрын

@@RDsRCReviews is yours brushless now and can you link some items

@RDsRCReviews

3 жыл бұрын

@@hobbygrade1.042 not yet but I'm going to upgrade it 124019 to brushless soon. I'm going to use a Dumbo RC TX/RX and an old brushless motor/esc out of an old truck.

@hobbygrade1.042

3 жыл бұрын

@@RDsRCReviews Will make a vid on the 144001 brushless or is the 124019 vid be the same for brushless on both and has the motor on your 144001 worn out yet and have you been using it often

@RDsRCReviews

3 жыл бұрын

@@hobbygrade1.042 yes they both take the same parts just the 124019 is a 1/12th scale buggy so it is a bit larger than the 144001. Look up my recent videos of the 124019.

Im planning to get this do u think i should get it with the 2500mah battery or the 1500mah?

@RDsRCReviews

4 жыл бұрын

2500 will run much longer though the additional weight could slow it down just a tad.

@astrocactus4097

4 жыл бұрын

Oh ok thx also do u mind telling me how long the 1500mah battery runs?

@RDsRCReviews

4 жыл бұрын

@@astrocactus4097 hard to say as it is hard to get run times on cars since it all depends on how fast or slow you drive it but you should have no problems getting 15 mins. If you wanna support my channel please consider buying it through the purchase link in the video description. It won't cost you a penny more but it'll help me get more items like this car to review.

@astrocactus4097

4 жыл бұрын

@@RDsRCReviews no problem will do im already using the site bangood thx for the help really appreciate it!

@astrocactus4097

4 жыл бұрын

@@RDsRCReviews thank gor ur help i bought one from banggod yesterday and with two 2600mah batterys

very nice video i am thinking about geting 1 of these is it longer then a 1\18 latrax rally? let me know it you can thanks i sub to you and hit the bell

@RDsRCReviews

4 жыл бұрын

Yes it is 1/14th scale so it is larger. 1/18th is really tiny. If you plan to order one be sure to use the discount codes and link in the video description. Just know that they are currently on backorder so it may be a few weeks before it ships.

If you upgrade the battery you can get up to 50

@RDsRCReviews

3 жыл бұрын

Upgrade to what? 3s? No way you're getting 50 on 2s unless you upgrade to brushless.

@Pothead2005

3 жыл бұрын

@@RDsRCReviews Well on amazon they give you the option to buy 2 battersy with it they are called AWANFI 2S Lipo Battery Pack 7.4V 1500mAh 45C Rechargeable RC Battery Pack

@RDsRCReviews

3 жыл бұрын

@@Pothead2005 yep that is a dual pack that runs in parallel. It isn't running in series as a 4s. It is running in parallel as a double capacity 2s pack so you'll get double the runtime but it won't make it drive any faster.

@Pothead2005

3 жыл бұрын

@@RDsRCReviews Good but even without brushless it still goes fast.

@RDsRCReviews

3 жыл бұрын

@@Pothead2005 yep it sure does.

Where can you buy tires for this?

@RDsRCReviews

4 жыл бұрын

you can find many aftermarket tires that will fit it on Banggood or eBay or even Tower Hobbies. Just need to measure the dimensions. Parts will be available soon if you wait or you can look up the LC version that has been around a while for spare parts.

@ungratefulbastard8166

4 жыл бұрын

I’m the store

whats the run time on this

@RDsRCReviews

4 жыл бұрын

Not sure because run time on cars vary so much depending on how fast you drive it and how often you stop so that's why I never try to give drive times.

@radiocontrolled9181

3 жыл бұрын

Exactly. Depends on how you operate the throttle. For example by continuously blipping the throttle (on/off) like shown in this video, you are wasting energy. When you blip it like that (not feather it to accelerate) you are pulling a large current from the battery. Accelerating more gradually and keeping more constant throttle will give you a longer run time. It is also more gentle on the drivetrain, tires and obviously . . .on the battery and ESC. Having said that, everyone will enjoy his particular driving style :-) Don't forget to put more grease in the diffs as they come with just a little bit inside from the factory. I will upgrade mine to brushless soon, mainly to be able to use my personal transmitter with it. Not going crazy high on the kv, just a 3300kv 3650 size motor and 2s Lipo. Maybe will try 3s too one day just for the buzz. But something like 70km/h max is plenty fast for me so 2s will do just fine. Brushless systems are more efficient, so the run time will be longer too. Cheers guys !

Is this rc waterproof?

@RDsRCReviews

2 жыл бұрын

No, it isn't waterproof (very few are) but it is splash proof.

It’s a 550 motor not a 540

@RDsRCReviews

3 жыл бұрын

That's correct. I simply misspoke. You aren't the first or the last to point that out.

All that noise sounds like the gears need to be shimmed. You cant even access those differentials

@brushbros

4 жыл бұрын

It costs only $90.

@ungratefulbastard8166

4 жыл бұрын

I wish they will put a 1000 dollar shimmed ready differentials with 90 dollar price. And I wish it would come with its own Chinese mechanic who is able to access those differentials. Then I will pay the 90 bucks.

@jasonbricker3310

4 жыл бұрын

Diffs are easy to access and replace. I’ve done the front in both of mine

Lol.....tamaya.....

It is not a 540 motor it's a 550 motor I no it is big 😎

@RDsRCReviews

3 жыл бұрын

Look at the comments before pointing out a minor slip of tongue from a 2 year old video. Hint, this has been beaten like a dead horse already. Is it even a big deal? 540, 550. Who really cares?

I like the tires on that

@RDsRCReviews

4 жыл бұрын

Me too!!

Good video but make sure u know the names of the parts and maybe a script of point you want to talk about

@RDsRCReviews

4 жыл бұрын

The only mistake I made was calling the motor a 540 instead of a 550. I've been doing this for 4 years so I don't need advice but thanks for watching.

@martin3288

4 жыл бұрын

RD's Drone Reviews well u called the chassis a metal tray. But a script is still smart because i found the video a bit messy and u could edit a bit. 25min is too long, 15-18min would be better in my opinion for a review. But this is my opinion, do something with it or not and like u said u have been doing it for 4 years so you do how u like it.

@RDsRCReviews

4 жыл бұрын

@@martin3288 but it's all good :) You are correct that the video could have been shorter. I didn't realize it was that long until I uploaded it. I rarely use a script because it's tough. Just testing the products, reviewing them, filming and editing takes many many hours of thankless work. I do it because I enjoy it but I know I'm not perfect but I've improved a lot and I always try to be honest. Some channels are flashy but shallow on content and honesty, some are rough and amateur but are brutally honest. I think I fall somewhere in the middle. Thanks for stopping by!

@QuadDamageFPV

4 жыл бұрын

@@RDsRCReviews I personally enjoy the banter, you're doing great. I have also been doing videos for 4 or 5 years and find your presentation very enjoyable. Keep up the great work my new RC friend 👍

@RDsRCReviews

4 жыл бұрын

@@QuadDamageFPV thanks for the encouragement!!

I wish they will throw a real Lamborghini engine on it for the price !

It’s a chassis not a tray don’t eat food on it kids

@RDsRCReviews

3 жыл бұрын

You're the second smartass to point this out. You think I don't know it's a chassis? I wish I could be like you and never have a day where the words don't come easy. I simply couldn't think of the word at the moment but thanks for being an armchair QB and setting me straight.

60 mph out of mine.

@RDsRCReviews

2 жыл бұрын

Not on 2s brushed you aren't getting that. Maybe 3s brushless.

@RDsRCReviews

2 жыл бұрын

60kph yes, 60mph no

@cyberneticinterfacemodular3996

2 жыл бұрын

@@RDsRCReviews Yes on 3s.

@RDsRCReviews

2 жыл бұрын

@@cyberneticinterfacemodular3996 3s brushed? That seems hard to believe. I get 50mph on my brushless 94107 on 3s and I can't see this brushed 550 motor doing that.

That's a 550 motor not 540

@RDsRCReviews

4 жыл бұрын

That's correct. It is a 550 motor which is a cm longer than a 540 but I grew up with Tamiya cars which all used 540 motors so out of habit I tend to say 540. At the end of the day it is a minor difference as a 540 motor will still work in it. Seems like a rather silly thing to comment about don't you think?

The car is nice but I wish it would come with his own parking space next to each park I go .!

You can get the new WLTOYS 144001 buggy here. Be sure to apply one of these coupons first for an even lower price. 1. 20% off code: BGW144001 only available for 20 orders Exp: 2019-11-30 2. 18% off code: BGRC144001 Exp: 2019-11-16 www.banggood.com/custlink/vGKvejU6N3

2s is 7.4v not 8.4v. I bet that car would still rip on a 7.2 Nimh pack.

@RDsRCReviews

4 жыл бұрын

A 2s lipo is 8.4v fully charged (4.2v per cell). 7.4v is the nominal voltage of a 2s lipo (3.7v per cell). As I also mentioned in the video a 6 cell NiCD/NiMH pack is 7.2v and a 7 cell is the same as a fully charged 2s lipo at 8.4v. The biggest problem is NiCD packs, even AA sized, are kind of heavy but it would still rip on them but would lack the punch of a lipo. Thanks so much for stopping by!

@KaizerTest

4 жыл бұрын

@@RDsRCReviews Aha...right you are.😁 I have 2 drones a parrot and a Xiaomi FIMI A3 that I fly fpv with. They are fun but the cars are my thing. I will stop by more if you do more car videos. 😊

@RDsRCReviews

4 жыл бұрын

@@KaizerTest thanks so much!! I do a lot of cars though drones are still my focus. However with winter coming I'll do my cars I checked out your channel earlier and you are off to a great start! Best of luck!

@KaizerTest

4 жыл бұрын

@@RDsRCReviews Thanks brother. I do like drones too. Actually anything RC really. Ive been in the hobby since 1978 with my Radio Shack cars, then Tamiya, Traxxas and HPI. Im trying to break 100mph with a Tamiya. Thats the brand that was my first hobby grade Rc( like many of us that are slightly advanced in age)...lol. I also had a helicopter and a few planes in the early 1990's.

@RDsRCReviews

4 жыл бұрын

@@KaizerTest me too. I'm 48 and I've been into them since my Radio Shack and JcPenny's R/C every xmas. My first kit R/C was a Monogram Madwolf then I got the Tamiya Hotshot II.

كم سعرها اخي ارجو الرد

@RDsRCReviews

2 жыл бұрын

English

@RC-hw9jy

2 жыл бұрын

@@RDsRCReviews How much is the car?

@RDsRCReviews

2 жыл бұрын

@@RC-hw9jy there's a purchase link in the video description. I believe it is $90

@RC-hw9jy

2 жыл бұрын

@@RDsRCReviews I am from Iraq very much I love the RC hobby, but the prices are high, I can not buy

@RDsRCReviews

2 жыл бұрын

@@RC-hw9jy I understand. Banggood is your best option but it may not be cheap enough for you living in Iraq.

The car is too noise , I wish they will throw some 25000 dollars Eargo budds with it the price !

@RDsRCReviews

4 жыл бұрын

All the metal parts is why it is noisy. At this price point is is hard to complain. Personally I don't care about how noisy a car is so it doesn't matter much to me.

why is ur intro a beer can

@RDsRCReviews

4 жыл бұрын

Good question. A friend made it as a gift so I felt an obligation to use it. I just made 3 new intros so I doubt you'll see this one again.