You're the neighbors I hope for but never have. I'm sipping on my morning coffee getting tips while my harness is being delivered.

I keep coming back to this videos for a recap and motivation to keep this old truck on the road. Thanks

No matter what stage the truck is in.... it's alwsys a blast to take a cruise in it!!! Thanks for the ride brother!!!! w.w.

I sure hope American Autowire sponsors you because you made my decision on their products easy. I'm restoring a 67 C10 and after watching your video I actually can't wait to tackle the electrical side of my build. Thank you for your videos they are always great. May 2019 bring you great success and happiness with your future builds and KZread Channel.

Love this build! Great job as always. Keep 'em coming. Keeps me motivated for my short bed, step side build.

That red truck is stunning, cant wait till I get there, I have a lot of rust repair to do... I couldn't of done it so easily without your videos so thank you a bunch!

Thoroughly enjoy your uploads. Like you, I'm working out of a single garage bringing back to life a '69 Grand Prix, so I appreciate the quality you seem to achieve in the space you have. I'm also inspired by your progress, and additionally, blown away with how organized and clean you manage to keep your work area. I try (and relatively speaking, my space is clean and organized), but looking at your working environment, I'm in awe. Thanks for positing! -A

I really like how the wires are hidden in the engine bay. The test drive was cool too. Nice work!

Great video. Exactly what I was looking for, very detailed, no nonsense, to the point, no wasted moments. I'm going to be completely rewiring a 64 impala. This helps alot. Thank you.

@badecreeper40cardenas89

Жыл бұрын

I have to rewire my 64 el Camino any tips?

It's coming along and lookin good, your dad will be happy to have such nice truck that you built with such attention to detail !

Thanks for the Video. I appreciate you giving us all the necessary info but being short and to the point (too many videos have too much unrelated talking but not yours. I have purchased an American Autowire kit for my 1969 C10. Your video has given me a good idea of the installation involved. Thanks again!!

Great video! Excellent descriptions and camera work. I also liked that we were rewarded with a nice test drive at the end. Very satisfying to watch.

Really cool seeing the old truck on the road. Looking forward to seeing it finished👍👍👍

I used the same vender for my 57 Belair. Everything connected up perfectly. I’ll use the same on my 61 Chevy truck when the time comes. Gibson, keep up the good work.

Making that job look easy. Dreading doing my nova. Going with the same brand you are using and liking what I see.

That's the way to go all new wires and new style fuse box you a gifted man everything you know how to do building trucks "1 man shop" you do it all that make it look super easy to work on trucks but I know it's hard work love your videos keep them coming 😉👍🏻

Wow! What a great job. You make stuff look so easy.

Watching your vids makes me miss mine... I had two.. 65 and a 66. I got the 65 in high school, and it had 25k original miles (292 straight 6, three speed on the floor (with low)). To this day, I had no idea or reason to sell it. Regretted it ever sense. I have a 89 K2500 nearly finished.. Bought it new.. frame up restored. Just need the weather to heat up a little, and stop raining.

So far , this is the best wiring video I have seen Great job Gibson!!!

Great video !! I just bought a 69 gmc sierra. I'm to start a rewiring job on. This helped me out.

Needed this. I have to redo my electrical system and I’m not a mechanic. Helps with a little bit of motivation

Man oh man, what a great truck.. Your real close now!

Great to see the old girl alive again! Cheers

Amazing work !!!!!! Motivational for sure ! Thank you

Awesome gift for your dad!!

Doing some major updates on a 57 Chevy. Even though I'm a retired electrician, I'm NOT looking forward to doing the wiring since the goal is to make it VERY NEAT and hide as much as possible. Thanks for showing us around. As always, very nice work. Happy New Year !!!

@Gibson63.

5 жыл бұрын

Pappa Bob Thanks Happy new year

Looks like a great wiring kit nice work

The blue truck has came along way like it a lot. You do great work

It sounds great. Looks good too.

Really looks good Gib. Followed you and the red truck from beginning to finished product. Great job. l'm just getting started on my '65 gmc. Have done some....sb 400, turbo 350, '76 chevy a arms, disc brakes, pwr steering and brakes but that's as far as the money went so far. Really admire your work. Keep up the good work........don't stop on this one, do another one.

@Gibson63.

5 жыл бұрын

James Pinckard will see what happens after this one I’ll be on the look out no doubt

Beautiful trucks! Thank you for thos video. I have my Dads 63 needs a lot of TLC. Shipping it from Hawaii to Idaho. Praying I can find someone to do this.

Looking Good! I am now right behind you with my project 68C20. I have learned so much from your videos. Happy New Year!

@Gibson63.

5 жыл бұрын

Jim Miranda happy new year bro good luck on the 68

I am liking that wiring harness. Very nice.

Awesome! Just picked up the same wire harness .. thanks for the look into the project! Your an awesome builder Sir, nice trucks! Mine is a “63” great looker bought it from Alabama.. guy wasn’t a mechanic at all.. I’m fixing certain things… got 45 k into mine so far… Love the old steel.. Again, nice trucks Sir!

@Gibson63.

Жыл бұрын

Thanks for watching man

@TaekwondoFitForLife

Жыл бұрын

Absolutely Sir, love the red one you’ve got restored very cool color! I’ve got a Tremec 5 speed to go into my “63”. Behind an engine I had built by “Hot Rod Company” they provided at the cost of right at 10k a 383 Stroker small block. They claim on the web that they routinely produce 514+hp in these.. Bull, valve train geometry is way off.. I’m having to fix their f-ups .. I think they get a rotating assembly and monkeys do the rest.. Ha ha, live and learn.. hey I’ve got lots of pics of that engine, nice serpentine accessories drive.. definitely show, but I’m having to “perfect” their lack of “detailing” let’s say… “don’t bother with them” but looks like a 10 k engine, I’ll give it that.. Hey, nice rides Sir! You rock as builder.. Keep the old steel rolling… P.S. mine went through inspection lanes for Delaware. Only failed for lights.. harness is mostly fried..

Listen man...you do realize you are the best on the internet, don't you? All of us out here really appreciate you and your talents. I really wish our politicians had just one ounce of common sense, talent and work drive that you have...America is proud of you!!!

@Gibson63.

3 жыл бұрын

Thanks for watching man should have some more videos coming up soon take it easy

Its alive. That kit looks to be very well done.

Good job Steve. Wish I had half of your energy.

My dad and I are restoring my 62 c10, and your videos have been very helpful. The blue Chevy looks amazing. Keep up the good work.

@Gibson63.

5 жыл бұрын

Blue Bass Productions Thanks

@sleeper71chevelle1

5 жыл бұрын

You should look at the red one. Its a work of art.

@landonpalmer6029

5 жыл бұрын

@@sleeper71chevelle1 yeah. The red 63 is unbelievably well done. By the way, I'm guessing that you're a big Chevelle fan?

@sleeper71chevelle1

5 жыл бұрын

I have a few healthy drivers. I am not a restorer at all.

Looking really good!

That red truck is bad ass.. you do great work...

Coming along nicely!

Amazing work! Really enjoy your channel, envious for either truck. My dream👍 happy new year

@Gibson63.

5 жыл бұрын

Maureen Toy Thanks man

Getting there, nice harness ty for sharing

You do good work. 👍

Nice job, thanks for sharing your experience!!

@Gibson63.

2 жыл бұрын

Thanks man

I was considering helping a friend on redoing his 77 F150 harness.. but the kits are waaaaayyy more expensive then we imagined. I was expecting up to 350 ish, but this system in the vid is almost a grand. Holly Cow!

Nice workmanship!!

That looks amazing

Wow, your doing awesome gob, mine should be in the same stage yours is but it has been just hard to get on it, plus I have no garage, just a car port outside in the elements, but it will get done

Damn nice work man, runs like a champ. Have a good one.

@Gibson63.

5 жыл бұрын

Military Chevy Thanks man

You made that look easy. My stock harness is all chopped up. I’ll be getting this kit soon.

@luhro35ive

3 жыл бұрын

Where can I buy the kit from

Beautiful work señor !!

@Gibson63.

5 жыл бұрын

Hermen Lomas Thanks

Fantastic!

Cool L79 Air Cleaner!

Awesome job.

Really nice work Steve. Wiring job is really neat. Good thing the Po Po wasn't out in your neighborhood during the test drive. lol

Nice wiring kit for the C10 brother. I looked into the script valve covers you have on your Pop's 350 and there sweet covers but the price on them are way more then this old man can let go at this time but they sure are sweet and cast aluminum I would have never guessed they were! I'm also going with the Ram Horn exhaust manifolds less chance of bolts backing out and leaks. I just picked up a nice clean older Eddy C3BX intake manifold with the oil fill tube for my 327 next Holley Carb. I'm getting there one baby step at a time lol... l can't wait to get all my other parts then get my 327 put together and dropped in my C10 this summer God Willing. I haven't made my mind up yet if I'm going to stay with the original 3 on the tree and it's old M318 3 speed tranny or pick up a rebuilt Turbo 350 auto tranny for my C10 ?? Eather way it's going to be alot more fun driving around my old Blue Smurff C10 after I switch out engines.That old 250 in-line 6 cylinder just keeps going an going but there not much fun for a Saturday night run if you know what I mean lol... Remember what I said before if I win the lottery I'll get ahold of you Gibby and set up an appointment for you to fix up my 63 C10 shorty fleetside after you get your Dad's done lol... Gibby that's one sweet gift for your Pops. Keep on Trucking brother...

@Gibson63.

5 жыл бұрын

Yea man those valve covers were a little pricey but they sure are cool, good score on the intake manifold your right about those 250 engines thay just keep going

That’s smooth!!!!...

Outstanding!

Awesome job

Man that's the way to do it!

I recall watching one of your episodes that you put an ididit tilt column in your red truck I was hoping to see if you can list the part number I'm curious to see if I could use the same one in my 65 C10 which looks like you should fix that problem thanks again awesome work

I bought this kit today! 1960 Apache 10

Nice! If you were close by I would love to have you redo my wiring harness. Looks really good. Good job!

@stacysmith4928

5 жыл бұрын

We need a buddy like my Gibson!!!

You are going to make Papa Gibson cry when he gets this. Cheers.

Nice job!

Great job

Thank you for all you do . I have a 1963 k10 carry all (Suburban). I want to turn it all disc. Maybe you or your friends know what year is best to get for a front axle.

Hello, my name is Jerry where do u live . I have a 1965 c 10 I need help on my truck. I watch your work all the time . U are a great machine

Why can’t you be my neighbor? I could learn quite a bit. I’m doing an 85 camaro v6 to a carbed 90s LT1 stroker. Now I’m learning to fix all my wiring screw ups. I need a kit like what you had.👍🏻🇺🇸

Can you do a video on how you got the wiring harness ready to be plug and play

Appogzizes for asking I looked for the link on vendor for wiring hardware. I'm starting on a 65 c10 and would like to change out the wires Thx awesome work on some awesome trucks

Very nice.

nice work gonna be a cool old truck

@Gibson63.

5 жыл бұрын

The Paint Shack Thanks man

Looking great! Never thought to use some soundproofing of the cabin? Or is that too much off the style? It must feel like listening the engine in a tin can.

Great content and helpful videos. Where do you get your parts you replace for the c10? Thanks

u da man 4 reals

How do u get this stuff done so fast. Seems I been working on mine forever 👍

Nice work, anyone would be proud of it....

Awesome video and show how

Thanks..

So are all the connectors already wired on. I saw you solder the one connection do you have to do all of them or was that something different for a little insurance. I’m gonna need to do this to my 72 el Camino that burnt up the whole front end.

Is that steel mounting plate part of the kit? If not, where did you get it?

What supplies power to the fuse box? I’m confused on how that works. Do you wire + from ignition switch to fuse box to supply power?

Great video sir much appreciated, where did you get the wiring harness from?

Where did you wire your electric choke? I’m having that issue now

I like 👍

Looks like a nice kit. I woulda saved a bunch of time and hassle if I would have bought one.

@Gibson63.

5 жыл бұрын

MrHevyshevy yea this is a great wiring kit the instructions are pretty easy to go by also

i bought a 1976 c10 from a gentlemen who hacking the living hell out of the wires nothing works lol thanks for the video im buying this

👍

Nice job! Looks like a pain in the butt..how long did it take you to install the complete harness?

just installed the same kit in my 64 c10

I which l can fund same body like your talent in Las vegas,keep the job well done

Good job Gibson. Wiring looks clean and neat.

@Gibson63.

5 жыл бұрын

wiley gailey Thanks man it’s coming together

Thank you for posting this. Nice pickup. Where do you get that firewall insulation with the tar paper on it ?

@Gibson63.

5 жыл бұрын

Classic parts

Sir absolutely beautiful job I know she’s going to be absolutely beautiful

@Gibson63.

2 жыл бұрын

That’s man Everything turned out great

Forgive me for this but I never understood why my c10 has 2 small wires going to the starter. I know ones start but what’s the other for?

How hard was the wiring to perform from 1-5? 1 = changing oil, 5 = rebuilding engine/tranny?

@filmart430

2 жыл бұрын

So how hard was this project? Trying to see if I should pay someone or just do it my self.

Gibson63 could you do a short video on the Reverse light switch. I’m currently working on a 66 C10 and the current reverse light switch that was installed had a broken prong that is pressed to activate the reverse lights when the column shifter is moved down. The only problem is, the tab on the column shifter continues to rotate and snapped off the plastic prong on the reverse switch. Any help is greatly appreciated

Great job! I have an 85 GMC shortbed I want to tackle the wiring on, this video was great. Did you strip out all the wires yourself?

@Gibson63.

2 жыл бұрын

I stripped all the old wiring out and put in alll new