Take 2 prong video out! Check it out here: kzread.info/dash/bejne/q6mnt7ZycZbNqbA.html I wrap a trillion cut stone into a prong ring!

@tommtommkin

2 жыл бұрын

Ah wigjig doesn't have brass wire anymore? I looked at there site and cant find it.

@ZurickDesigns

2 жыл бұрын

@@tommtommkin that’s a bummer 🫤

@tommtommkin

2 жыл бұрын

@@ZurickDesigns Yeah it is. I hope there are some other places I can find great video thanks. :)

@judithjeffers7666

Жыл бұрын

That’s beautiful! I just love your work.

Beautiful artistic work! However, the camera work made it difficult to follow each step. ❤️

@sandracarrillo5150

Жыл бұрын

Agree

People are very critical. I personally thank you for taking time to offer your expertise for FREE. Very pretty ring x

@ZurickDesigns

3 жыл бұрын

Thank you! ☺️💜

@ewe392

Күн бұрын

Constructive criticism is necessary for improvement! People who listen to reasonable criticism will only benefit. This ring is beautiful

This popped up on Pinterest today. It is always good to go back a few years to see what you were up to. Yup you were just at good then as you are now. Thanks for sharing this cute little ring.

@ZurickDesigns

23 күн бұрын

That’s awesome! Thanks you! ☺️

Beautiful work! Thanks for the tutorial! I think I was able to follow but it was difficult at times when many of the steps were completed just barely off screen....

@ZurickDesigns

2 жыл бұрын

Yea. It’s hard getting used to filming for sure. I made another video to try… kzread.info/dash/bejne/q6mnt7ZycZbNqbA.html I think I’m in frame a lot better! Lol

Would love to see this video remade to see the steps that are being described. I love the ring and the instruction is paced perfectly. Awesome work!

@ZurickDesigns

2 жыл бұрын

Thank you! Here’s my second video… kzread.info/dash/bejne/q6mnt7ZycZbNqbA.html Same techniques! ☺️

@Lightning-Man-1954

2 жыл бұрын

@@ZurickDesigns Thank you for redoing the first video. Your voice is calming and relaxing as you talk your way through. I'll check where I can get the brass wire. But think I'll just go for gold.

@Lightning-Man-1954

2 жыл бұрын

@@ZurickDesigns wow 👌...not often I get a heart ♥️. I see you have a left hand support. I do Laser micro welding. My left hand has done Millions of micro movements. Right thumb was a trigger finger repair. I polished 60 metres of hexagonal acrylic to create the ice crystal's for Supa man 4...his space ship control's. $60 K worth of work...scene was cut. I still got paid. Thanks for the ❤️

@ZurickDesigns

2 жыл бұрын

@@Lightning-Man-1954 that’s incredible!!

@sandracarrillo5150

Жыл бұрын

Agree, out of frame a lot

Very delicate design, classy yet refined! I always wondered how the prongs were made and your detailed explanation was concise. Thank you! You just need to pull the camera out a little and this one would've been perfect. Have a great week! I can't wait to see next weeks tutorial! Happy 4th! 😎

@ZurickDesigns

3 жыл бұрын

Thank you! ☺️

This is lovely! Just what I was looking for🤩 thank you for sharing

This very pretty. Thank for sharing this! I definitely learned some new techniques!

I know the camera is all over the place, but honestly, other than the educational value, that was the best part 😅 your explanations cover up for the camera angles and I will argue that the camera angles appeal to meme enthusiast learners like myself ❤️ even if your other videos' camera angles are more stable, I'll still watch them

Nice designs and easy to follow instructions. Many beginners quit before they even get started because they just can’t understand the information. Good job for doing well to reach those people! Subbed right away!!

@ZurickDesigns

2 жыл бұрын

Thanks so much for the nice comment! ☺️💜

Thank you for the great tutorial! Some positive feedback: I have not seen any wire wrappers do a Slow-mo in their tutorial - I LOVE it! It makes it so much easier to see and understand, what it should look like. I wish more wrappers would use Slow-mo in their tutorials. Especially in those difficult to see and understand parts of the tut. The drawings on the video are useful also :D THANK YOU!!!

@ZurickDesigns

3 жыл бұрын

Thank you so much! ☺️💜

That’s gorgeous! Thanks for sharing!!!

I love that purple stone one!!! Your work is beautiful!

@ZurickDesigns

2 жыл бұрын

Thank you!

I bought two stepped ring mandrels one for whole sizes and o e for half sizes because I found them so much easier to work on than the tapered ring mandrels with no distortion in size for the ring band.

@ZurickDesigns

Жыл бұрын

That sounds like a great idea! I need to get some too!

BEAUTIFUL!! 🥰🥰🥰 Ive been making beaded jewelry 18 yrs. I'm just NOW starting wirework, even though ive had wire stockpiled for several years. This is VERY inspiring and educational. I REALLY appreciate you! Have a great day!!💖

@ZurickDesigns

Жыл бұрын

So glad you liked it! There’s this video too if this one was hard to follow… kzread.info/dash/bejne/q6mnt7ZycZbNqbA.html

@michelecherek5392

Жыл бұрын

@@ZurickDesigns I'll watch it after I finish watching your Viking Knit Cabachon video!!❤️‍🔥❤️‍🔥❤️‍🔥

@ZurickDesigns

Жыл бұрын

@@michelecherek5392 awesome 😎

Bellissimo 💙 grazie x aver messo questo tutorial

Beautuful- thank you for sharing x

So pretty! I would love to see more rings like this without binding and weaving around the shank. I think it looks much cleaner and fancier that way!

@ZurickDesigns

Жыл бұрын

I think so too!

Really beautiful work. Thank you for sharing.

@ZurickDesigns

2 ай бұрын

Thank you too!

ΣΥΓΧΑΡΗΤΗΡΙΑ-ΠΡΑΓΜΑΤΙΚΑ ΥΠΕΡΟΧΟ!!!!!

Wow, what beautiful rings! Those faceted stones are gorgeous. That was a delicate and tricky build but the end result is dramatic and lovely. Your Brussels Griffon dog is a cutie! Thanks for a great tutorial!

@ZurickDesigns

Жыл бұрын

Thanks for watching! Gert looks like a Brussels griffin doesn’t she! She’s actually a pug/maltese mix! Lol

@mjremy2605

Жыл бұрын

@@ZurickDesigns Oh really, wow! Maybe that is how Brussels Griffons got started, ha ha! She is a cutie with that soulful expression. She's a companion dog breed and they are very loyal and get so attached to their owners.

@ZurickDesigns

Жыл бұрын

@@mjremy2605 for sure! 💜

Beautiful Ring, and you have such a lovely voice, calming, very relaxed, and you are a great Teacher on these Tutorials

@ZurickDesigns

Жыл бұрын

Thank you so much! ☺️💜

Thank you for your tutorial it was interesting to watch.

@ZurickDesigns

3 жыл бұрын

Thank you

More prongs, I love it! Beautiful look! Thanks!.

@ZurickDesigns

Жыл бұрын

Yay! Thank you!

Love it! very pretty. ❤

@ZurickDesigns

2 жыл бұрын

Thank you! ☺️💜

Удивительная работа.ВОСТОРГ, мастерство. 💖💖💖🌺🌺🌹🌹🌹

Beautiful!❤

Very pretty!!!

Love the ring, it's beautiful!! I am very grateful for your time on the Tutorial but found it very hard to follow. The camera was all over the place and out of frame. So glad you said you were going to do a redo, I will most definitely be tuning in!💞😊

@ZurickDesigns

3 жыл бұрын

I’ll definitely work on that! I loved how the ring turned out but when I saw the footage 🤦🏼‍♀️

@kathyduncan2104

3 жыл бұрын

@@ZurickDesigns Yes I'm excited!! From what I could make out you made it fairly simple..So, I'm looking forward to a more detailed tutorial!! Thank you again for your time! You rock!!💞🎊💐😊

@ZurickDesigns

3 жыл бұрын

@@kathyduncan2104 thanks so much☺️ I’ll work on the new one soon!

@bluelover7496

3 жыл бұрын

kzread.info/dash/bejne/iaGLzMSqo8KZc9Y.html

It would be nice to have book/paper of this with pictures showing how to do this. This is a lot of steps to remember.

@ZurickDesigns

Жыл бұрын

That sounds like a lot of work!

Thanks for showing the prong technique. Your explanation and demonstration are great. I’m a little confused about how you finished off the wire ends from the prongs but I’ll watch it a couple more times and figure it out. Thanks 😊

@ZurickDesigns

2 жыл бұрын

So sorry about that! I was disappointed when I went to edit it. Here’s a better one. Hope it helps! kzread.info/dash/bejne/q6mnt7ZycZbNqbA.html

@karenbeavin

2 жыл бұрын

Oh thank you so much 😊

Beautiful work but, your work is off camera more often than not. I'm just learning and appreciate your work and video. Really need to see it all. Thank you!

@ZurickDesigns

Жыл бұрын

I hear ya. I redid it. The hardest part was finding a way to film! kzread.info/dash/bejne/q6mnt7ZycZbNqbA.html

Wow its so prety . Thaks so much for teachen ours. 💞💞

Beautiful thank you very much appreciate it ❤️😊❤️🙏

Super cool, no fancy equipment yet beautiful result!

@ZurickDesigns

10 ай бұрын

Thank you!

Love this tutorial ❤️

@ZurickDesigns

Жыл бұрын

Thanks! 💜☺️

Beautiful ring and your very skilled I got the jest of what you were doing, but it was a little difficult to follow, but I appreciate you sharing and teaching😊

@ZurickDesigns

3 жыл бұрын

Thank you! I got so involved with making the ring I lost track of the camera 🤦🏼‍♀️ I’m going to redo the video very soon ☺️

Would love to see this done with a faceted, rough-cut stone too.

This is amazing 👏 and awesome! Tfs❤

@ZurickDesigns

Жыл бұрын

Thanks!

Beautiful ring! Hard work.

Good job 👍 beautiful result

@ZurickDesigns

2 жыл бұрын

Thanks! ☺️💜

wow this is sooo lovely and classic 😍

@ZurickDesigns

2 жыл бұрын

Thank you

Beautiful art work

@ZurickDesigns

Жыл бұрын

Thank you 💜☺️

Espectacular!!!!

Really pretty.

Beautiful and very different type of ring.

@ZurickDesigns

2 жыл бұрын

Thank you! ☺️💜

Beautiful

It’s gorgeous the ring 💍 💚💚💚💚

@ZurickDesigns

Жыл бұрын

Thanks! 💜☺️

Love to see how the ring is made, but work is off camera. Look forward to maybe another video?

@ZurickDesigns

2 ай бұрын

Try this one… kzread.info/dash/bejne/oYSYktmMc9i2gKg.htmlsi=RA3mun3KYLSvKC2e

Patience of Job!...I would lose my way...You did a Great Job💜

@ZurickDesigns

Жыл бұрын

Thank you! 💜☺️

i just love this ring however i am new to making prong solitaire ring and you do explain clearly but as you are doing the ring there are a few times you move away from the camara is there other video doing these prong rings thank you for your great video

@ZurickDesigns

11 ай бұрын

I ended up redoing the video for that reason. kzread.info/dash/bejne/q6mnt7ZycZbNqbA.html Hope this video is easier to follow. Same concept!

Beautiful ❤️

@bluelover7496

3 жыл бұрын

kzread.info/dash/bejne/gWGTr6uAYNSbktY.html

Love the simplicity & elegance of this ring! Could this be made with a flat cabochon?

@ZurickDesigns

3 жыл бұрын

I think a cabochon would use a different technique

That’s sooooo beautiful ring thank you so much ❤ can you do it with multiple faceted stones instead of one?

@ZurickDesigns

Жыл бұрын

That sounds challenging! I have not tried that yet! 😬

Precioso, te felicito, eres toda una artista. No sé tu idioma, pero aprendo muy bien, saludos desde Costa Rica ❤

@ZurickDesigns

2 ай бұрын

Greetings 💜

Wow that's beautiful 😍 ❤️ 😍 ❤️

@ZurickDesigns

2 жыл бұрын

Thanks! ☺️💜

Thanks .

It's very beautiful. Thank you for the video. I didn't understand what kind of gemstone it was. Can you tell me?

@ZurickDesigns

Жыл бұрын

This is a peridot ☺️

Absolutely stunning Ring. Half the time I can’t see what you’re doing because you’re not even in the camera frame. I would love to be able to make this ring and I can always see what you’re doing. And when you’re holding the ring at the end can you hold it still for a little bit so we can really get a good look at all the angles you keep turning it and we can’t really see it

@ZurickDesigns

Жыл бұрын

I realized that. Camera angles were hard to figure out. Try this one… kzread.info/dash/bejne/q6mnt7ZycZbNqbA.html

Very beautiful, where can I buy wire like this?

Thank you so much for very nice tutorial. The only thing I would change next time. If you keep your work all the time visible. That could be done with camera moved little bit away or wide lens.

@ZurickDesigns

3 жыл бұрын

I got so involved with this one that I didn’t pay attention to the camera. I’m going to redo this video but use a different shaped stone and hopefully keep everything in frame!

Beautiful!!!! So good !! May I ask, cause its surprisingly tough for me to her a Square wire, would a normal 22G wire work too?

@ZurickDesigns

3 жыл бұрын

It might. Give it a try. It’s hard to stabilize round wire with bindings because they slide.

@peggylocke1016

3 жыл бұрын

This is gorgeous and I have tried. She makes it look easy. I also have a hard time with square wire. And I love the finished look. I did buy 16 g square brass and I’m having a great time with it. You may try this to get a confidence with it. And you can do a lot. It’s a tough wire but if you mess it up I found you can hammer it and it makes a cool piece of jewelry. Happy Wrapping.

That's my birthstone!

@ZurickDesigns

Жыл бұрын

Awesome! Mine is amethyst ☺️

End result is beautiful. It would be nice to see how it was done.

@ZurickDesigns

Жыл бұрын

I redid it kzread.info/dash/bejne/q6mnt7ZycZbNqbA.html

@CflNurse

Жыл бұрын

Thank you! Beautiful work

This is a wonderful piece of craftsmanship. I would love to copy it. What wire/material did you use? I have a peridot at home at the moment and want to make my own ring. More of these beautiful videos please. Thank you, your Jacky from Germany

@ZurickDesigns

5 ай бұрын

Hi there! I used brass wire for this one ☺️

Oh wow yes mam that one was much easier to follow, Thank you ! That is so beautiful I see it takes a good amount of time and patience if it's ok to ask what does one like this cost to make and sell for. I Love it

@ZurickDesigns

Жыл бұрын

All depends on the wire and the gemstone. I sold this brass ring for $40 since the wire and gem were pretty cheap! Sometimes the gem costs $40 on its own!

@jodimorris1484

Жыл бұрын

Awesome!! Thank you so much for replying I realy did enjoy watching you take a few pieces of nothing much on its own and turn it into an exquisite work of art Just fascinating to me.

great！✨✨✨

@ZurickDesigns

Жыл бұрын

Thank you! Cheers!

Genial!!!!!! Muy bello!!!!! Lástima que el vídeo está fuera de foco !!!! Podría repetirlo????

I was captivated by your video! I am a beader but would love to try this. Can you use round wire and hammer it out?

@ZurickDesigns

3 жыл бұрын

That sounds like a lot of work!

@zango3134

3 жыл бұрын

I personally wouldn’t because it might cause marks in the wire

Hi! I happened to see this Vlog that was one year ago and I viewed it. I like your art works they are beautiful and I’m inspired to follow you the only thing is your movements on explaining how to do is too quick that made me have headache and always out of the camera. Anyway thanks for sharing your beautiful art works anyway I hope you’re still active because I’m your new subscriber now. Regards!

@ZurickDesigns

Жыл бұрын

Thank you for subscribing! Recording is very new to me and I’m still trying to master it! I’m used to working in my lap and to have to hold it out away from me is difficult! Try this video out… kzread.info/dash/bejne/q6mnt7ZycZbNqbA.html

It’s obvious that you care a lot about your viewers! It’s a great tutorial, just needs more definition after making the prongs. Just as we’ll get better with practice, so will you!

@ZurickDesigns

3 жыл бұрын

Definitely! Thank you! ☺️💜

@Gizapowerplant

3 жыл бұрын

Words from a wise lady!

Beautiful artistic work! However, the camera view made it difficult to follow each step. ❤️

@ZurickDesigns

3 жыл бұрын

Yea. I was disappointed in my footage as well. I thought I could salvage it. The feedback is helpful. I’m going to reshoot it.

@Jymare444

3 жыл бұрын

@@ZurickDesigns great! I know it must be difficult getting a project right and trying to keep the right view for the camera. U do great work and have helped me with many projects. Thank u!

@ZurickDesigns

3 жыл бұрын

@@Jymare444 it is! Thanks for understanding ☺️

@amberm2777

3 жыл бұрын

I thought it was pretty easy to see but I've also been making rings for a long time so I guess I can read between the lines.

@bluelover7496

3 жыл бұрын

..... kzread.info/dash/bejne/iXmNzbKkhK_HnM4.html

So beautiful, your work is impeccable!. I would like to ask you about the wrapping on your thumb (if you don’t mind), are you experiencing problems with your joint?. I only ask because I did start to have problems because of wrapping. This morning I had surgery, my hand specialist fused the joint. I will not be wrapping for six weeks. Already having withdrawals. Lol, please be careful 😍🙏🏼💗

@ZurickDesigns

2 жыл бұрын

That’s a bummer! I hope it helps!! I have bone on bone arthritis at my CMC joint. Cortisone shots help a little. I would need reconstructive surgery it sounds to fix it. They take a wrist bone out and cushion the joint with tendon from what I heard. Same as you I wouldn’t be able to use it at all for 6 weeks. Sounds scary!! It really hurts though! 🤔

@galemonterio5261

Жыл бұрын

Get with a functional medicine doctor before seeing a surgeon, and try upping your magnesium intake and definitely Vit D3

Stay on camera. Good thing I can follow you. Some won't. Nice ring.

WOW! ❣️❣️❣️

what were the measurements of the gemstone you used? great video btw 🥰🥰

@ZurickDesigns

2 жыл бұрын

Thanks! It’s a 6mm round

I couldn't even watch the video through it's entirety, you were on screen most of the time, I'm a very visual learner.

@ZurickDesigns

3 жыл бұрын

I’ll be working on a new one soon! Got too carried away with this one and I didn’t pay attention 🤦🏼‍♀️

Acrylic sealer to keep shine for longer?

@ZurickDesigns

Жыл бұрын

You could. I haven’t tried that yet.

Wow so pretty ❤️🇩🇰

@ZurickDesigns

Жыл бұрын

Thanks! 💜☺️

jolie bague, je ne connaissais pas cette façon de tourner les fils, bravo c'est ravissant, Nadine

Is it wise to buy a peridot for wire wrapping if the stone is faceted (facettiert)? I suspect that the stone does not really have a flat side. I hope you can understand my question. My mother tongue is german.

@ZurickDesigns

Жыл бұрын

You would need to make the prongs long enough to protect the culet for sure

Please tell me where to get one of those clamps. I've checked all the major craft stores with no luck. I don't know what to call it online and only get clip type clamps doing a search.

@ZurickDesigns

2 жыл бұрын

No problem! Wire Jewelry Cushion Clamp: www.wirejewelry.com/special-offer/Wire_Jewelry_Cushion_Clamp_Pack_of_1-29530-.html Love these clamps! ☺️💜

I want to try using brass. Is it close to the same gauge as copper?

@ZurickDesigns

2 жыл бұрын

Gauges are the same. I think they feel similar too

@MG-ef6qs

2 жыл бұрын

@@ZurickDesigns thank you so much. You are an amazing artist. You feel flattered you answered me

@ZurickDesigns

2 жыл бұрын

@@MG-ef6qs awesome! ☺️💜

Hi. You specify 5 wires but the wrapping over mandrel shows 3 wires?

Thanks for all the feedback on the aweful footage! Take 2 coming soon! 😊

@amberm2777

3 жыл бұрын

Haha you perfectly explain how to make the ring, that's all that I need I'm a simple girl ❤️. This was great!

@ZurickDesigns

3 жыл бұрын

@@amberm2777 thanks! ☺️

@Gizapowerplant

3 жыл бұрын

You did great, live and learn.

@ZurickDesigns

3 жыл бұрын

@@Gizapowerplant yup! 🤷🏼‍♀️

@Opt1mistyc

3 жыл бұрын

I cn't wait. Iv liked nd subscribed for any nd all of ur posts 😃. Happy Wrapping!!!

Parabéns

I had a hard time in places because you were out of focus, great sadness, lol beautiful ring.

@ZurickDesigns

Жыл бұрын

I was sad too and redid it! kzread.info/dash/bejne/q6mnt7ZycZbNqbA.html

Thanks for watching! I hope you enjoy this video! Let me know in the comments what you thought and don't forget to subscribe if you haven't already! 😊💜

I have my mandrel on a round vice

hermoso

What are you using for a camera here?

@ZurickDesigns

2 жыл бұрын

Phone

@diamondcoachcurtis40

2 жыл бұрын

@@ZurickDesigns It actually looks better than phone. Guess I need a newer phone.

@diamondcoachcurtis40

2 жыл бұрын

Have you wrapped Arkansas Crystal's I'm trying to figure out how to use a prong or smaller wire, make it look good and not cover up crystal. I've got lots of smaller points. I love your work..getting inspired..

Great video and tutorial! However, the filming made it difficult to see what you were doing. As a suggestion, maybe have more than one device from a different angle so we can see what you are doing? The editing would make it easier to follow since quite a bit was done outside of the viewing field. I am inspired to create a ring with my own loose gemstones! Thank you! 💕💕

@ZurickDesigns

2 жыл бұрын

Thank you! ☺️ Try this video… kzread.info/dash/bejne/q6mnt7ZycZbNqbA.html I was really disappointed when I went to edit this video. I posted it in hopes that it would make sense. It didn’t to a lot of people so I redid it. I hope the redo makes more sense.

Love your video instructions but the movement in and out of view is very difficult for me to follow and to use. You are an amazing talent.

@ZurickDesigns

2 жыл бұрын

Thank you! Here, try this one… kzread.info/dash/bejne/q6mnt7ZycZbNqbA.html

Where did you get the stone from?

@ZurickDesigns

6 ай бұрын

People I know through our rock club

@Divine_healing

6 ай бұрын

Thank you

I liked this style of ring and chose this one to learn - my first wire-wrapped ring. Too bad we couldn't see you doing most of the work. Your camera man wasn't paying attention. Really pretty style but, you need to either zoom out so that we can see you doing the work, or aim the camera lower.

@ZurickDesigns

2 жыл бұрын

I realize that. Unfortunately I don’t have a camera man lol I did make a new video I think is better. Check it out if you’d like ☺️ kzread.info/dash/bejne/q6mnt7ZycZbNqbA.html

👍

Très très joli bijoux dommage trop gros plan et souvent hors porter de la camera félicitation pour ce travaille très minutieux

Beautiful ring!!! Definitely need some work in the camera department,

@ZurickDesigns

Жыл бұрын

Yup! Still learning lol

It's so hard when the work is being done below the area where I can't see what you are doing. Then you move the work into view and it's blurry.

@ZurickDesigns

2 жыл бұрын

I hear ya! I was still figuring out how to work and film at the same time. Try this video… kzread.info/dash/bejne/q6mnt7ZycZbNqbA.html