shop.spreadshirt.com/texashondachannel- Here is a official link to get merchandise!

To all the people who wanna give pointers make your own videos of this it was a good video he showed what you needed to know

Tip on depinning push the wire in, unlock then pull it this method always works for me.

Should just de pin that plug so much quicker and easier

Top tip, when you solder, heat the wire with the iron from underneath and feed the solder in from the top in to the wire, you shouldn't cover your iron in solder. Flux paste on the wires also for a top job.

I’m trying to Engine Tuck my 93 Honda Civic and this was the best tutorial I could find thank you for the help

There's a video on how how to de-pin connectors.

Going to have so much fun with my 2011 Crown Vic wire tuck 😂

I hear ya bro, it's much easier to re-solder them than it is to re-pin them. Bay is looking sick homie.

@TexasHondaChannel

5 жыл бұрын

Thank you! Its coming along slowly. Usually by now i would have a engine in but this month has been horrible on income.. We will pick back up soon and be pumping them videos out daily eventually.

@shredct3118

5 жыл бұрын

@@TexasHondaChannel you should try and hit up Ricer Miata, he's about to do a cross country trip from FLA. To Colorado, have him on the channel and you'll get a ton of new subs . Plus the dood is just awesome to hangout with. You have Great content and I'd love to see this channel blow up.

@TexasHondaChannel

5 жыл бұрын

SHRED CT Thank you much appreciated! It’s growing fairly quick and I’m thankful. Just opened a online store to sell a bunch of merchandise. Check it out and share it on Facebook if you want! shop.spreadshirt.com/texashondachannel-

Creative content that helps! even though needs some corrections in reconnecting the wires. Btw, this is awesome & detailed! lots of love from Malaysia 💖

Your videos are super helpful and well made. Great work!

@TexasHondaChannel

4 жыл бұрын

Thanks i appreciate it

Didn't realize you were Moore Motorsports until I saw the Irish tattoo, lol.

If your not adding heat shrink wrap on the cables u should cut your positive connection slightly off from others incase tape peals or shifts with weather

I used to suck at depinning too bro. Practice. You'll get better. I use bobby pins and paperclips.

I liked the video, but from what ive seen professional race cars do, is that they simplify the harness as much as possible, and make it as easy as possible to remove, that way during a race, if theres a small fire, or fender bender they can swap the harness in under 5 minutes to keep racing

Honda genius!

@TexasHondaChannel

5 жыл бұрын

Shaun Anthony I don’t like to toot my own horn but toot toot lol. I try my best and that’s all I can do.

Cut them all in the same place AND an inch from the plug? Was the battery still connected out of curiosity

I think I might do this tuck on my wife's ek. Seems simple enough for a first time tucker lmao

De-pin the wires would have been much better. As for your soldering skills...FAIL. We all know you need to cover the connections with heatshrink tubing instead of just electrical tape. At least use a rubber grommet

@frazeldazzel184

3 жыл бұрын

Why

@tayvonrose2528

2 жыл бұрын

@@frazeldazzel184 cuz you can start a fire, shit can short. Just a big no no

@TheHorselemonade

2 жыл бұрын

why hondas get a bad name because people want to cut wiring harnesses and electrical tape them together and cheap out on everything

@compa_choo

Жыл бұрын

Heat shrink is just for a cleaner look. Unless it has the adhesive to make the connection water proof heat shrink will offer no extra benefit compared to e tape besides aesthetics. And we know 90% of enthusiast are gonna save money and purchase regular heat shrink

It looks good bro😎👍😎😎👍😎😎👍😎👍👍

What’s the name of that metal piece under the fender that’s spot welded on? Mine are all rusty and need replacing but I can’t find the name or part

Not bad. I wish I could of helped you. Your soldering was horrible but nice routing.

Heat shrinks are better for finishing. However, nice job and idea!

What is the color that u used on ur engine bay

Cars going to be frying lol

Latommyla has a good method no cutting or soldering required

It's easier and faster to just depin the connections than to solder.

@TexasHondaChannel

4 жыл бұрын

JRC54 I suck at depinning so for me it isn’t and my luck I would screw that up.

You could easily de pinned it instead of cutting it. But other than that nice video

To extend wires what kind of wire do you use?

@TexasHondaChannel

4 жыл бұрын

I like to use 16 gauge

Cutting wire hell no. Smell like problem in the future,, poor guy whoever buy that car from you if selling the future

The wire tuck routing was really cool but please learn how to solder before you cut the harnesses. You never cut a harness like that. Cut the wires at different lengths so they are not in one huge ball.

Atrocious wiring job

that grmet is literally the reason you get water on your floor when it rains or u wash the car.

The way you ran the wires was fine but you cutting and soldering the harness to “save time” is offensive

You need to improve your soldering skills. Overlap the wires, one over another and then solder. Cover with heatshrink tubing and then electrical tape/wire loom.

@TexasHondaChannel

4 жыл бұрын

Eric Xiong i have never had a issue with them holding and i have cars 5+ yrs on the road still using this method. Thanks for the tips though. Some times I do them like = then twist around

Should’ve just de pinned it. But other than that nice video

I like your style. But I wondering why couldn't you just make a bigger hole to pass wire ? Thanks

@TexasHondaChannel

5 жыл бұрын

Jo A Inactually did on my other channel I used a hole saw an drilled the hole through and ran all the wires through it with a grommet but seeing is how I am literally the biggest budget baller ever I’m broke as hell from paying for a house to live in and food on the table for my family so that was a expense I didn’t have money for at all.

@kevinarriagalopez6650

4 жыл бұрын

U can do what you think is best for u but use this video has a guide ! I’m wiring tuckin my eg coupe that’s gettin a obd2b gsr from integra but I think I can use my stock eg coupe harness

" now once you complete your tuck your engine bay should smoke just like mine 😅 "

Heat shrink is your friend. Good stuff tho.

@chukob5

4 жыл бұрын

It makes no difference the point is that you can’t see it

@ericxiong6582

4 жыл бұрын

@@chukob5 …..heatshrink eliminates the chances of exposed wires touching ground. Why do you think all those half-assed wire tucks have electrical issues such as blown fuses.

@chukob5

4 жыл бұрын

Eric Xiong if your careful electrical tape is meant for the same purpose that’s why it’s “electrical tape” just buy decent tape most of the wires he’s tucking will never have to be exposed or moved again

Cringe at the re wiring. This is how cwr fires start. Not a safe method at all. It would be better to use de pin . Or use a new connector block if you have to cut the wires.

Faster to cut and resolder than to depin? 🤔 ok

@TexasHondaChannel

4 жыл бұрын

Cooterbaby when you suck at the depin method and always screw it up then yes lol I prefer cut and solder method 🤷🏻‍♂️ you do it your way I’ll do it my way. If your good at the depin route then more power to ya.

@cunning-stunt

4 жыл бұрын

@@TexasHondaChannel Learn how to depin a plug correctly and save yourself some time! A lot of time!

id just get junk connector or just de pin that one an get oem pins

what color is your engine bay?

@WarriorOfEden3033

Жыл бұрын

Yes

Don't know why Honda didn't do that to begin with,....they put wires all over the place

Jesus christ man a little overkill with the tape! Nobody is ever unplugging that!

This is such a haggard ass way to do it 🤦🏻‍♂️ You’re literally butchering the harness!

@mellowrose9470

Жыл бұрын

Right I was thinking the exact same thing

Smfh

When you think life is bad just remember , he can’t afford to buy heat shrink. Hope things get better buddy.

I Feel like heat shrink butt conecters would be faster. Js

@jeffferryyyrippppp4629

Жыл бұрын

Would have been a better connection as well rather then his shitty soldering job

Wonder how easy this is on a Crown Vic 😂

@evanknight3629

Жыл бұрын

Bro don’t even try it takes hours to fish that thing out to attempt replacing it I would cry if I had to wire tuck a Vic

@WarriorOfEden3033

Жыл бұрын

@@evanknight3629 at least it's body on frame with a huge engine bay so might be easy. I would say a the hoses would be more difficult to route since it has a oil cooler a Trans cooler & a tone of value lines

Dude is rough with those wires...bet his car gives him he'll all the time...he's rushing too much

No one watching this should fallow this. If you don’t have the couple of extra $$$ to use the right parts, you might want to not be doing this until have the extra $20 to do it right.