Beautiful! I absolutely LOVE how I could tie this knot in the first 10 seconds of the video. No life intros, no promotions, just straight FACTS! Love it!

@andybrice2711

Жыл бұрын

Yeah, videos which start with a summary combine the best of "shorts" and longer form.

No way! Dude you're awesome I was NOT expecting any sort of response, especially not that quickly! :)

@MyUnquenchableThirst

Жыл бұрын

First class amateur right there!

@JaydubyaX

Жыл бұрын

check out pipe hitch, and icicle hitch.

@varunchaudhary4757

Жыл бұрын

Bro from which book can we learn all types of knot

I have actually used this knot at work as an electrician. You should show how to tie it with the working end of the rope doing the wraps, since that is the easiest out in the field. I’ve also used this knot to help me pick up stakes in the ground.

This is a (very) slight modification of the icicle hitch. A fantastic knot. Pretty situational, but the best there is when that situation comes up.

@JonGretarB

Жыл бұрын

The icicle hitch might be a little bit quicker to tie when you have access to the poles end. But it’s barely anything to talk about.

@3:36 the knot is a klemheist knot. a similar, single end friction hitch, like the one you demonstrate in the video is the icicle hitch. I used it on some #6 cable tied with mule tape and broke the wire before it slipped. It has the added benefit of not rolling free if tied on soft materials like rope.

This is one of my top 5 knots for sure.

I used this today to uproot a particularly stubborn overgrown weed. The roots were too embedded to pull by hand, so I threw the wire pulling knot right around the base of the trunk of the weed and tied the other end off on my car. A slow creep forward and it came right out :)

This knot is improved by sliding it a ways down the wire/pipe/etc. and following it with a series of lark's head knots. If you're pulling this wire through a conduit, or PEX pipe through a series of stud holes where the end could snag, simply wrap the end section with electrical (for wires) or duct (for everything else) tape, and ensure it forms a smooth transition from the object to the rope. The reason for this is for that cinching knot to form a lightly loaded backstop, where it will never be challenged, while the series of lark's head knots spreads the load to the object in a way that keeps strong control of it, but without causing point loads. This prevents damage, while also guiding the object better than just grabbing its neck, where it will now have a massive mechanical advantage on that stub that sticks past the knot. That stub will therefore have some multiple of your own strength working with any snag to maximize irritation. The industrial big wire pulling grip looks more like a "chinese finger cuffs" weave of metal wire that surrounds a length of the end of the wire. This also gets tighter as you pull, but I do believe the far end of that is taped down to the wire to at least comfort the electrician.

@chronicon5616

Жыл бұрын

Can't picture what you mean when you said to follow it with a series of larks head knots. Guess I'll get out some cordage and try to figure it out.

@paulstaney325

Жыл бұрын

Kellum grip ,works well and doesn't make a bulge on the wire.

@buckstarchaser2376

Жыл бұрын

@@chronicon5616 Imagine a fishing pole. The pole is your pull-rope, once it's under tension, and the eyelets guide your limp fishing line. By using lark's heads every few inches or feet (depending on the material you're moving), you're picking the thing up farther down in its mass, so the tension load on it is lower, which is good. The cost of that is you will be trying to lift something like a fishing line, but the top flops over. So, you put a series of lark's heads from your main support knot to the end part. Now, your rope is doing the tension, and the top of the object is simply along for the ride. Now, there is a bonus in that the lark's heads should add some clamping force individually, so that takes a lot of the load off of the main knot, and the material being lifted. Note that this video indicated that grip is a factor of how many loops he put into his demonstrated knot. Another example would be lifting several 2x4's of wood with a rope, but there's wind or a narrow passageway that they're being lifted in. Using the knot in the video, if you grip the wood by the end, it will likely slip, or crush the wood grain, or want to go horizontal and spin just to spite you, or even expand out, like an asterisk " * " just before going full calamity. You can put a heavy squeeze knot like the video down near the middle, or the bottom end if you have several pieces of wood, and then put a series of lark's head knots up to the top of the bundle, so that the bundle of wood is being pressed together along its entire length, rather than crushed in one small spot, with lower total grip power.

@tacvolun3570

Жыл бұрын

We have situations where we're not allowed to use tape or anything that could possibly leave residue behind. This is the interest in different knots.

@tacvolun3570

Жыл бұрын

​​@@paulstaney325 And oftentimes kellum is the choice but pulling many diffwrent dia wires needs grip sizes that they don't make or at least I don't always have.

The Icicle Hitch does a splendid job on slippery surfaces. This is like a variation of it. I like both, but this seems to make more sense.

Needed to tighten up a long clothes line (steel cable). Found this video and used this knot on both ends with a doubled cow hitch (so it would have a pulley effect). Worked a treat! Thank you!

Just wanted to say your videos have have made my life way easier ! I Wish i woulda got into knots and hitches sooner!

A new favorite ( lengthwise pull). I like the way the knot stays together under pull and is so easily untied.

That’s a slight variation of the icicle hitch.

@lorus511

Жыл бұрын

My thoughts too

@serena.lattanzi

Жыл бұрын

@@lorus511 I don’t know about this one. The icicle hitch even holds on tapered objects

@xizeryump6379

Жыл бұрын

I think i would prefer an icicle hitch in the described scenario. I don't know how well that tuck under will hold with inconsistent load (pull, rest, pull, rest)

@stephanddd

Жыл бұрын

There is a fundamental difference: with the icicle, under load, the last couple of wraps spread away from the hitch and create a very tight constriction point in one concentrated point. With electrical cables, this could damage the underlying cable. Instead, this "wire pulling" hitch pulls from the top of the wraps, and the constriction is spread across all the wraps - it creates the same amount of friction, but srpead across more of the surface area and much gentler on the underlying cable. This hitch is a variation on something I have seen referred to as "The Stopper Knot" (I know, it's a very confusing name). But if you search for that, you'll find actual on-site workers using this type of hitch to pull large bunches of electrical or optical cables..

@EvilMonkey8366

Жыл бұрын

Thanks for mentioning, now I know that one too! Could have used either a while ago...

Since no one's said it: the "pipe hitch" is the "arborists's knot" shown later in the video. That's also the first thing I thought of when I saw this one. I'm glad to hear it's seeing use, since it's been wonderful the few times I've used it. The fact that someone else called it a "post hitch" is very interesting to me, since it makes me realize that that's probably what Geoffrey Budworth meant when he labeled its simpler cousins, "pile hitch", and, "double pile hitch", not just a foundation pile or a dock pile that's also a bollard for tying boats to, which is what I assumed he meant based on the word and the context in the book. It seems like the post hitch would be a great tool for pulling fence posts, probably paired with a half hitch, or as someone else suggested, a lark's head...so I'm sure someone's done it, especially at a dockside where the simpler ones were already in use. The thing I'm most reminded of looking at it is probably some of the "prussiking" knots, but I'm sure the icicle hitch would've come to mind if I'd ever put the work in to learn it. I'll have to look, since those knots are also ones I never bothered committing to memory.

@ps7462

Жыл бұрын

We used that knot finished with a clove hitch! After we removed the basket if we needed more. We also tied the same knot with chain on occasion for long 15kV runs and line truck for pulling out. I believe you will find it in the Ashley book of knots (1761). I knew a lineman who called a very similar knot the grapevine. After I retired, a buddy of mine told me he always used a prussic. I could immediately see the value there! BTW one can hang a block or come-along on a pole with a prussic or klemheist. Even the klemheist can be found in the Ashley book of knots ((1762)though, not called that).

this is a modified klemheist knot. primarily used in climbing.

@mysss29

Жыл бұрын

Aha! everyone is saying icicle hitch, but I was reminded of knots like that...I just never learned them so I wasn't quite sure.

@jakemccoy

4 ай бұрын

The hitch at 3:35 is a Klemheist. You gotta post a timestamp because there are multiple hitches here.

i never comment on youtube videos so just know that this means a LOT. I used your knot for pulling my pool light cables. thx brotha

Just opened up yt looking for a knot for doing exactly this! Thank you 🙏

Icicle hitch is similar, great demo. I did see it mentioned that it would hold on a taper like a marlinspike. Always wanted to try it with cotton rope. Also that it can be used to pull a small tree, will grip a slippery small tree when the bark is removed by pulling up with a block. I used to use something similar while sailing when the sheet winch was bound up and you needed to free up the winch by taking the tension off. all the best

@arsenvokrug4198

Жыл бұрын

I successfully used a rolling hitch for freeing up a winch rope - but that’s because, under stress (mine that is), I couldn’t remember the icicle hitch!

“First class amateur” 😂 that’ll be my response when someone asks me how the new whatever I’m doing is going.

I feel like it’s a combination of a Timber hitch & a prusik working together. 👍🏻🇨🇦

Very similar/variation of the pipe/post hitch; although that typically finishes with a lark's head/cow hitch- Great video, thanks!

That Bobby's into log pullin.. GREAT KNOT!!! Used it many times on broken guitar strings with dental floss so I could get some wraps around the tuning tree . 🤘🎸🤘

This is an outstanding knot! Thank you for this valued information!

This really compliments the 'Icicle hitch' knot 👍👍. Love this, appreciate your wok 😀

Priceless data. Cant thank you tube enough for suggesting this video. Remarkably useful

i try and learn every knot you show. you know some really unique knots!

this was very informative, thank you for doing the knot tests

Fantastic video. Always looking for a way to pull logs out of the forest. This will work quite nicely. Gracias, mi amigo!

Always a new knot to learn with you man.

I've used a rolling hitch to relieve tension on an overridden jib sheet and that seems to work fine.

I would love to see this demonstrated with an electricians polypropylene twine like Ideal Industries, Inc. 31-340 Powr-Fish Pull-Line, or similar. When I pulled cable we used something like this, but the knot work was only a series of 3 half hitchs spaced apart by 1-2 inches, then secured with an obscene amount of electrical tape.

Thank you. I can now use that on my tent poles.

As an electrician, we just used half hitches in a row

@rulrich45

Жыл бұрын

Agreed. The tighter you pull, the tighter it gets. Then to undo it, al you have to do is push it from the other side. (after removing the tape, of course)

@Kewder

Жыл бұрын

Same here. Pull sock for big wire when we use the tugger. Half hitches for smaller stuff when we pull by hand.

@patvickers8189

Жыл бұрын

The lineman's hitch that he uses here is used for high voltage cable where the half hitches can very easily damage the dielectric. As tension is put on the line, it constricts Evenly over the length of the knot. I do like my half hitches as well. I rarely have the luxury of pulling baskets. I actually like and trust my own wire heads more. The old timers that taught me made their own mares tails, rope or wire.

Keep it man, always worth a watch.

Love to see this compared against the icicle hitch. I’m sure this is faster to tie (especially with cold, icy conditions 30ft up on an electrical pole), but the icicle hitch is supposed to have the best holding power in town, even on slightly tapered objects. Let them fight!

I’m pulling wire next week and I’m gonna try this. Thanks

The knot at 3:50 is the Kleimheist Hitch. It's my favorite for hammock camping instead of the Prussick

This is very similar to a gripping sailors hitch, but the latter may be superior as it does not collapse on rope like this one does.

@jort93z

Жыл бұрын

I think it is closer to a klemheist (which he showed off towards the end). They tie the ends together rather than tucking the rope in. Tying it together is obviously safer than just tucking it in if you depend on it to not fall from a tree.

Amazing as always. Keep it up.

Nice pulling knot!!

The arborist knot you referenced; I believe it's the Klemheist knot

Well done, sir! Your channel is outstanding!

Sooo the second one is a Klemheist and the first one is a modified Klemheist. Super useful knots!

Very useful knot, thanks

We use 3 half hitches spaced about 4 inches apart wrapped with stretched electric tape to pull networking cables. This gives more than enough friction to keep the string from slipping off the cables and will rip the outer sheathing off before anything else breaks.

Awesome knot! Awesome channel 👏 👍

Magic knot for pulling some round thing!!! Thanks! Maybe you can recommend it's modification for hexagonal rod (like pensil) because it looks like current version of knot doesn't work for it properly?

These are great if you have the room and the one side pull point is to be considered also. I remove the outside strands and or the next layer, in a staggered manner, using only the core strands to go through the eye of a pulling rope and folded flat with zip ties to stabilize or use heat shrink cut into small lengths that are pushed up to cover the strands (butt to butt). Couple raps of high strength tape. Finish filling the difference in the diameter with pulling compound soaked rags. Be prepared to give distances which only matter mostly at the last of the pull I do like the way a friction leveraged wide area gripper aka name your knot.

Useful video n knowledge... appreciate it

I pull wire for a living and my favorite pulling knot is vinyl tape and a single fold back

Amazing, thanks for sharing

Thats cool. Its kind of like a Prusik knot.

Thanks a whole bunch ❤

I'm going to try this for joining two ropes. My dog has a habit of chewing through the ropes on his toys and while i can tie a new one, I'd like to be able to fix the existing ones! Not sure what size rope to use for the knot, might need to experiment. And maybe it won't work with something compressible like rope, but i dont need tie breaker level strength!

It's a modified klemheist, and unless you keep continual tension on the line, it will release. Tied properly, on a doulbled line, tension can be released and applied with minimal slip.

2:25 this is where Fairmond's Friction hitch would work really well. It behaves a lot like a prusik but for Rope I prefer some form of bend. Reaver's, zeppelin or sheet jut to name a few. Any number of climber's friction hitches serve here too. 3:30 I believe that is the Klemheist.

This looks like a variant of a Blake's Hitch. In a Blake's hitch the end is tucked under the first two loops instead of beside them.

I am sure you are knot crazy! Thank you

I'll use that, Thanks!

as electricians we pull more than 1 wire at a time. often thhn wire, with a nylon sheath that comes pre-lubricated, with a pull line that's lubricated. but yes, this Icicle hitch relative is a great knot.

@LogoTanFlip

Жыл бұрын

I'm using it to lift a 2in diameter cable about 20 ft to a wire tray at work. Everything else i tried just slipped off but this knot worked amazingly

@skythetreeguy3821

Жыл бұрын

The icicle hitch is more of a clove hitch with the bitter end and working end looped through! This knot is a Klemheist and modified Klemheist.

I’ll stick to simply Looping the wire and electrical tape. All this fancy stuff won’t stop it from getting caught up on the pull. 😂

double figure 8 hitch might help .. like a constrictor knot but with a total of 4 turns.. very high holding...

Stopper knots are awesome

I just double up the end and do a clove hitch and then half hitches with both ends. And putting some tape on the ends so it won't snag on some corners and fall of if you have to pull it back for some reason

Awesome thanks!

Can you think of a quick release knot but this time made in wide webbing? For making/attaching a nordic walking style hand strap to a pole. (these are slightly different from a regular hiking pole, more pressure on the strap)

@mysss29

Жыл бұрын

I'll bet a constrictor knot or a rolling hitch / constrictor knot combo would work (with drawloop of course). I'll have to find some webbing and give it a try. How wide is the webbing usually? I'm thinking 25mm (one inch), but "wide" tells me it might be more like 40mm (an inch and a half is 37mm), or something like that, which would probably be a lot more challenging to deal with.

@markifi

Жыл бұрын

@@mysss29 40 mm on the bottom edge of the hand for sure, but it could be sewn onto a much thinner one, even 10 mm because it only has to be wide on the bottom. usually they are not really just webbing but a whole sewn triangular "sling" in the nordic walking stuff, but i'm thinking of making my own pole. normally the quick release part is a plastic mechanical construction (have store bought already but i'm curious how to make it with simple hardware)

I am new into the world of knots so I recently discover your channel and its great! Could you make a video about different types of sinthetic ropes? Greatings from Spain 😁

I think the vice flying off the back of the car was enough to convince me it was a good'un 😅

The same knot used by my family several generations.

Damn you! Literally ONE DAY after assuring my wife I was done buying tools and you go flashing that spike. I mean, I bought one (obviously; I know quality when I see it, and I'm not stupid) but in this case S&H (shipping and handling) has a C&N (complaining and nagging) fee, too. I hope you're happy. Nice knot, too. I'll be using this with regularity.

@First_Class_Amateur

Жыл бұрын

We’ve all been there! Thanks for your support.

@grumblycurmudgeon

Жыл бұрын

@@First_Class_Amateur well, I AM trying to raise awareness for Workshop Induced Financial Exhaustion. If you or someone you're bros with suffers from WIFE, let them know they're not alone. As many as 1:2 of the population may be afflicted (more in China). Please, consider wearing a zip tie or duct tape ribbon to show support.

I kept accidentally tying this knot when I was trying to learn to tie a Klemheist knot. I wanted to be able to do it without a loop & just using 1 end of a rope.

ima try tomorrow on some SES/R and some 4 AWG

When I pulled feeder wires we just made a sock out of tie wire. It fit thru the raceway far better than thi k rope.

@patvickers8189

Жыл бұрын

We called 'em mare's tails. You can split the 3 strands of a rope into 6 strands and make one with a rope. And they're surprisingly strong. The lineman's hitch that he shows will keep from damaging the dielectric on high voltage cables.

That is a good knot … I need to know how to add a loop. So I can clip a safety harness to. I climb up flag poles with a ladder and I want to tie off to something. On a flag pole nothing to tie off to. If I fall off the Ladder my 280 pound body should be safe and not slide down to pole

I have used a knot called a Timberline Hitch for pulling wire.

Two major ways to make a nose are 1. A few half hitches with a clove hitch to keep it down the wire, plus tape. 2. Skin the wire at the end, destrand if necessary, and fold the skinned wite through an eye splice or boland (sp?). Remember the nose has to fit through the pipe and go around bends. If you pulled it with a machine (ie tugger or whatever you call it) and you need more wire out but the machine isn't far enough away to get enough wire then the best thing I found is a horse tail that you wrap back and forth making something like a basket. The horse tail done correctly will even grab wire soaked in lube. If it's a hard pull the prusic hitch will damage the insulation and so will the various other hitches people try. Oh and that clear coating is nylon hence thhn. Maybe i missed the point of the video??

This looks similar to an icicle hitch. Curious which would perform better.

Curious as to what would happen if instead of wrapping it around the back once before putting it under, you wrapped it twice, or fed it under after one backward wrap, then fed it round again and fed it under a second time...

Hello my friend!! Which is the best knots to uses in a small pick-up that doesn't has the open hook to fix the rope?? Thanks

It may collapse on a rope with a free end but this could be used to attach a cord to a taut ridgeline.

Nice this is good

This might be called the icicle hitch, a response from others that know more than I

When your ropes broke on the metal bar tow, I think I saw the rope rub against the edge of the bar. It could have been some cutting swarf/ slivers, and caused the rope to break early. Still don't doubt the strength of your rigid pull knot.

Does this have any advantages over a rolling hitch? It seems like on rope it would actually be disadvantaged vs the rolling hitch .

We use half hitch. When we pull wire

(1:16) Would it make it less sturdy if instead of going under both ropes to secure the end, you only went under the first one and then stick it between the two? Hope that made since.

Hey, what knot/combination of knots would you use to tie off a sleeping bag or bag of clothes to the handle bar of a bicylce (for bikepacking)?

Half hitch is what I’ve used to pull for 20 years

Nice

Is it a klemheist knot?

how does this compare to the rolling hitch?

What type of knot could I tie in paracord that would be good for making a cord that holds my reading glasses on my neck? So often one sees these devices use some type of rubber tubing to hold the cordage onto to glasses stem.

@patvickers8189

Жыл бұрын

Someone else probably has a better idea. I would like a really thin cord with 5 or more half hitches. Easy knot as well!Problem is that they want to spiral around . But I do like the look of several pulled tightly together.

@jakemccoy

4 ай бұрын

The knot at 3:35 is a Klemheist. The others are not.

Great knot, but every electrician knows that you strip off the outer insulation a few inches, and cut a few strands of wire off the outside. Then you can easily bend any size of wire over a closed loop (either steel fish tape or pull rope). Inside a conduit (where most wires are pulled) friction is your enemy, so you want a smooth transition from wire to rope. All those wraps would easily get stuck.

@eccy13

Жыл бұрын

Ive primarly used this for demoing out old wire when half hitches just arent getting the job done. Another good spot for it is towards the end of a pull you've been using a tugger on and the wire has started sticking out. Wrap this around the set of wires and you can get the extra feet out after the head is out of the conduit.

Kinda like the icicle hitch.

A modified clove hitch knot. Just more loops.

I really enjoy your videos, great teaching. But it drives me nuts that you don't melt the ends of your lines. Is there a reason why?

@nathanielyoungman4454

Жыл бұрын

Time

I've pulled hundreds of kilometers of comm cable of every size from copper to fibre through everything with everything......never tied ANYTHING like what I see here....😮

It borrows the working principles from the existing friction hitches like icicle hitch, pipe hitch, prusik, klemheist, sailor's gripping hitch, clinging queen Clara, knut, death grip hitch (redbarnboats? YT channel) and creates a new one. The working end wraps 4 or more times around the cylindrical object away from standing end. Then it returns (in opposite direction) to trap the standing end and the other turns under a diagonal/ helical wrap followed by couple of half hitches or otherwise further trapping the free end of working end along with the standing part and the earlier turns. When lengthwise/ longitudinal pull is applied, all the wraps away from the standing part tighten to grip around the object creating enough friction to oppose the pull. This is a new kind of friction hitch which like FCA's Venus fly trap and many other FCA's improvised and practically useful and break-tested knots could end up one day published in FCA's book of knots. I will recall it as FCA's friction hitch. Great work. One of the prime knotting channels on YT. Looking forward to all future knot innovations from a hobbyist's point of view. A suggestion is whether you could break test the death grip hitch (redbarnboats YT channel) which is different from lot as it includes alternating turns in both directions or improvise it as an ultimate gripping hitch but using the most cordage.

@mysss29

Жыл бұрын

Wonderful! I'll be looking up the ones I don't recognize!

What thickness is the paracord you are using?

When in doubt: test to destruction!