willys rc jeep very beautiful, your slideshow so good
@airwolfie100
Жыл бұрын
Thank you very much!
@joeybran31055 жыл бұрын
Wow and WOW!!! Totally AWESOME!!! As the owner of two 1946 Willys CJ2A and a 1950 Willys Wagon, I must say you have EXCELLENT fabrication skills. Thank you for sharing. Joe
@airwolfie100
5 жыл бұрын
Thanks joe! Unfortunately not in my possession anymore. Loved it while I had it!
@LCMNUNES19624 жыл бұрын
MUITO BOM TRABALHO, VERY GOOD JOB , FROM BRASIL.
@Garrett05310 жыл бұрын
Amazingly detailed! Nice work! Thanks for the slideshow.
@LCMNUNES19624 жыл бұрын
GOOD JEEP WILLYs BRASIL OK.
@nicolamarchese33187 жыл бұрын
Tu sei un genio, amico!!
@lokalrc60663 жыл бұрын
Superb!
@euniquetrailadventures9 жыл бұрын
Wow...some amazing work on that Willys bro. Now, that IS the definition on scratch built cuatom!!!
@aaronmcdaniel5893
8 жыл бұрын
That's so awesome wish I had that kinda patients
@nelsonfire675210 жыл бұрын
Excelente trabalho muito bom, perfeito parabéns!
@thedumpydustman60886 жыл бұрын
Awesomeness some skills there. Nice work indeed matey!👍
@crawler2009d9 жыл бұрын
super jeep il et réalise, tous les détaille son la, ta fait du beaux travail cool
@udishtelman6874 жыл бұрын
Wow that is insane 😲. Wow
@airwolfie100
4 жыл бұрын
Thanks Udi!
@nightflyer1234510 жыл бұрын
Good job, great detail. I like it
@matthewpauls24987 жыл бұрын
If you want to, I suggest making the headlights have rims around them and come out further that the grille to be a little more realistic buts it's fine how you have it. Now I've seen a few picture of the M38's lights sinking into the grille, but most of them popping out. I've never seen a 2A's headlights sink in like that, but again it's fine :)
@RCCrawlerWorkbench7 жыл бұрын
Very impressive and inspiring. I meed to get mine finnished up. Thumbs-Up subscribed.
@argohio10 жыл бұрын
Nice work!
@eugeniogenio69427 жыл бұрын
Parabéns é um gênio!
@akshaymohanakshay63906 жыл бұрын
Grate work
@RCP578 жыл бұрын
Nice!
@jayrpederiso76487 жыл бұрын
Nice mechanical work
@airwolfie10011 жыл бұрын
Thanks RCguru!!
@matthewpauls24987 жыл бұрын
Wow, this is very amazing, but I have to say that the dashboard has aspects of the civilian version, which it shouldn't, but it is still nicly done!
@airwolfie1009 жыл бұрын
Thanks Eunqiue!
@Alexrallyes4 жыл бұрын
Excellent work, did you take the measurements from somewhere or did you do it with the 1/10 base? If so, could you give me the plans? I would like to do a project like that.
@airwolfie100
4 жыл бұрын
Dude to be honest, I don’t remember! That was 8 years ago! Now sold as well sadly. If I had to do it again, I found a picture with dimensions and I just divided them by10! Took ages to find the pic. I used to have the templates for the body, but I do not know where they are now unfortunately. If I did, I would share of course!😁
@matthewpauls24987 жыл бұрын
I'm sorry, I stand corrected, it looks like you have got the dash right, There seems to be slightly different versions of the 2A jeep. I thought you were making an M38 until I saw the square windshield which belongs to the 2A that's why I said the dash was incorrect.
@1967gokhan4 жыл бұрын
hello, great congratulations I'm doing 1:10 The soldering cup keeps it finished, I will share
@samnetam81773 жыл бұрын
😘😘😘😘
@airwolfie10010 жыл бұрын
Thanks argohio!!
@DoctorShineMaverick7 жыл бұрын
👍👏💪
@1967gokhan4 жыл бұрын
Good
@1981olmos6 жыл бұрын
hola me dirias donde bajo la plantilla
@airwolfie10012 жыл бұрын
thanks! I just built it bit by bit, as in the video above!
@AjmalYakoobMMAMuayThai
4 жыл бұрын
Hi bro, would appreciate if u can share the dimensions so i can use yhe measurements Thanks
@airwolfie100
4 жыл бұрын
ajmal yakoob, sorry it’s all scratchbuilt. I had some templates, but lost them when I moved home, and I now have sold it to someone a while back already.
@AjmalYakoobMMAMuayThai
4 жыл бұрын
@@airwolfie100 thanks
@airwolfie100
4 жыл бұрын
ajmal yakoob just google willys Jeep dimensions, and click on images at the top, you will get tons of pics with measurements and blueprints, and then just divide them by 10, that’s how I made mine. If you want it bigger obviously divide it by less. Best way is to measure the width of the axles you want to use and divide that measurement with the 1:1 measurement, you will get your ratio from that!
@hiryanu211 жыл бұрын
hi how are you, Ryan here from Bekasi,Indonesia,can use pangolin base for the same rig?plz respon, big thanks
@muffinman31114 жыл бұрын
What scale I want to build one my self Do you have any plans
@modelracer19 жыл бұрын
wow
@airwolfie10011 жыл бұрын
I don't know what pangolin base is??
@superashton10012 жыл бұрын
No way, how do you do something like this?
@airwolfie10011 жыл бұрын
I do not know what pangolin base is unfortunately
@halo_news11778 жыл бұрын
!!!!!
@aracnido40923 жыл бұрын
Excuse me, is it made with tin solder?
@airwolfie100
3 жыл бұрын
Yes, biscuit tins, removed the paint, and then soldered with lead, the ones you use for soldering electronics and wires.
@aracnido4092
3 жыл бұрын
@@airwolfie100 Well thank you, your work is very nice and interesting ... Greetings
@airwolfie100
3 жыл бұрын
Arácnido it was fun building it
@aracnido4092
3 жыл бұрын
@@airwolfie100 😁👍...
@deepaksain79145 жыл бұрын
How to make mini jeep bodyparts step up by step
@airwolfie100
5 жыл бұрын
Hi deepak, I made a cardboard template, as in the video. Then I used this to cut the tin and soldered it together with electrical solder, got to sand the parts down so they nice and clean though otherwise it won’t work. Also, the soldering iron needs to be adjustable and go up to 100W, you need a lot of heat to make it work.
@DIECASTTORQUE3 жыл бұрын
how to buy
@airwolfie100
3 жыл бұрын
Sorry, not selling these, but this one was sold to a lucky buyer!
Пікірлер: 60
willys rc jeep very beautiful, your slideshow so good
@airwolfie100
Жыл бұрын
Thank you very much!
Wow and WOW!!! Totally AWESOME!!! As the owner of two 1946 Willys CJ2A and a 1950 Willys Wagon, I must say you have EXCELLENT fabrication skills. Thank you for sharing. Joe
@airwolfie100
5 жыл бұрын
Thanks joe! Unfortunately not in my possession anymore. Loved it while I had it!
MUITO BOM TRABALHO, VERY GOOD JOB , FROM BRASIL.
Amazingly detailed! Nice work! Thanks for the slideshow.
GOOD JEEP WILLYs BRASIL OK.
Tu sei un genio, amico!!
Superb!
Wow...some amazing work on that Willys bro. Now, that IS the definition on scratch built cuatom!!!
@aaronmcdaniel5893
8 жыл бұрын
That's so awesome wish I had that kinda patients
Excelente trabalho muito bom, perfeito parabéns!
Awesomeness some skills there. Nice work indeed matey!👍
super jeep il et réalise, tous les détaille son la, ta fait du beaux travail cool
Wow that is insane 😲. Wow
@airwolfie100
4 жыл бұрын
Thanks Udi!
Good job, great detail. I like it
If you want to, I suggest making the headlights have rims around them and come out further that the grille to be a little more realistic buts it's fine how you have it. Now I've seen a few picture of the M38's lights sinking into the grille, but most of them popping out. I've never seen a 2A's headlights sink in like that, but again it's fine :)
Very impressive and inspiring. I meed to get mine finnished up. Thumbs-Up subscribed.
Nice work!
Parabéns é um gênio!
Grate work
Nice!
Nice mechanical work
Thanks RCguru!!
Wow, this is very amazing, but I have to say that the dashboard has aspects of the civilian version, which it shouldn't, but it is still nicly done!
Thanks Eunqiue!
Excellent work, did you take the measurements from somewhere or did you do it with the 1/10 base? If so, could you give me the plans? I would like to do a project like that.
@airwolfie100
4 жыл бұрын
Dude to be honest, I don’t remember! That was 8 years ago! Now sold as well sadly. If I had to do it again, I found a picture with dimensions and I just divided them by10! Took ages to find the pic. I used to have the templates for the body, but I do not know where they are now unfortunately. If I did, I would share of course!😁
I'm sorry, I stand corrected, it looks like you have got the dash right, There seems to be slightly different versions of the 2A jeep. I thought you were making an M38 until I saw the square windshield which belongs to the 2A that's why I said the dash was incorrect.
hello, great congratulations I'm doing 1:10 The soldering cup keeps it finished, I will share
😘😘😘😘
Thanks argohio!!
👍👏💪
Good
hola me dirias donde bajo la plantilla
thanks! I just built it bit by bit, as in the video above!
@AjmalYakoobMMAMuayThai
4 жыл бұрын
Hi bro, would appreciate if u can share the dimensions so i can use yhe measurements Thanks
@airwolfie100
4 жыл бұрын
ajmal yakoob, sorry it’s all scratchbuilt. I had some templates, but lost them when I moved home, and I now have sold it to someone a while back already.
@AjmalYakoobMMAMuayThai
4 жыл бұрын
@@airwolfie100 thanks
@airwolfie100
4 жыл бұрын
ajmal yakoob just google willys Jeep dimensions, and click on images at the top, you will get tons of pics with measurements and blueprints, and then just divide them by 10, that’s how I made mine. If you want it bigger obviously divide it by less. Best way is to measure the width of the axles you want to use and divide that measurement with the 1:1 measurement, you will get your ratio from that!
hi how are you, Ryan here from Bekasi,Indonesia,can use pangolin base for the same rig?plz respon, big thanks
What scale I want to build one my self Do you have any plans
wow
I don't know what pangolin base is??
No way, how do you do something like this?
I do not know what pangolin base is unfortunately
!!!!!
Excuse me, is it made with tin solder?
@airwolfie100
3 жыл бұрын
Yes, biscuit tins, removed the paint, and then soldered with lead, the ones you use for soldering electronics and wires.
@aracnido4092
3 жыл бұрын
@@airwolfie100 Well thank you, your work is very nice and interesting ... Greetings
@airwolfie100
3 жыл бұрын
Arácnido it was fun building it
@aracnido4092
3 жыл бұрын
@@airwolfie100 😁👍...
How to make mini jeep bodyparts step up by step
@airwolfie100
5 жыл бұрын
Hi deepak, I made a cardboard template, as in the video. Then I used this to cut the tin and soldered it together with electrical solder, got to sand the parts down so they nice and clean though otherwise it won’t work. Also, the soldering iron needs to be adjustable and go up to 100W, you need a lot of heat to make it work.
how to buy
@airwolfie100
3 жыл бұрын
Sorry, not selling these, but this one was sold to a lucky buyer!