www.williamsmobileclutch.co.uk 🇬🇧 Contact us for your clutch replacements. 0:09 2009 Mini Cooper Camden 1.6L Petrol. 38:08 2015 Fiat Ducato 35 MultiJet 2.3L Diesel. 1:17:43 2014 Vauxhall Insignia Design CDTI ECO SS 2.0L Diesel. 1:54:24 2010 Mini Cooper Graphite 1.6L Petrol. 2:25:30 2013 Citroen Dispatch 1200 HDI 2.0L Diesel.

Thank you Kevin. Hope you get to have a good weekend with family. And some better weather next week. Regards from Sweden.

Thanks Kevin always appreciate your upload absolute love it 👍👍

Great vid and editing as always. Thanks for the upload

KZread best mechanic!! Almost at 100k kev!!!!

@WMCS

4 ай бұрын

Nearly there. Gonna have street party 🥳 🍻😁😁

Thanks Kevin always a very good work !!!!! you are a best !!!!

@WMCS

4 ай бұрын

Thank you for tuning in 🍻🍻

I watched a few of your videos before replacing the clutch on my Yaris. Thank you for making these as it gave me the confidence to do the job myself. You lift those transmissions like nothing. It wasn't fun putting it back. 😅

Saludos bendiciones una semana muy dura y asusta pero al fin excelente 🚘

¡Gracias!

@WMCS

4 ай бұрын

Thank you for the kind gesture. It’s been well received and very much appreciated. Kind Rgds. Kez.

Buen trabajo como siempre Kevin-Albert. Te veo cada día desde España💪

Absolutely awsome work kev,,i replaced my mates passenger handbrake cable this week,,luckilly ,i had a good weather window,,on the old faithfull wheel ramps, ,,boy was it difficult,but i persevered with it and got ther in the end, But boy,did i suffer for it,,i pulled a right chest muscle,,av been in agony all week,,,am beter now.. My point is, that myself and my great fellow subscibers ,admire how you do this every day.. Godbless you kev,,your a top chap,and top mechanic,,awsome😊😊😊

@WMCS

4 ай бұрын

Thank you.

Superb of another quality video ,, i watch every episode 👍👍👍👍

@WMCS

4 ай бұрын

Thank you. 🍻🍻🍻

Buena comprecion. Bien de encendido. Bien lo inyectores. Carbon en el piston. Guia o reten de valvulas. No queda mucho para buscar. Saludos¡¡¡

I love how you have the rachet spinning before it meets the bolt to saved that couple of seconds everytime . You should get a pop up gazebo for those rainy days! is the dewalt equivalent impact rachet las good as the milwakee? I already imapctor and drill so prob stick with them

Im so hooked to your videos, please never stop :)

@WMCS

4 ай бұрын

😁🍻🍻🍻

Bravo!!! Grazie

Good evening Kevin , not far off the 100k KZread plaque, well done mate you deserve it

@WMCS

4 ай бұрын

Thanks Phil. Always great to hear from the channel’s original subscribers., it means a lot. Thanks. Definitely gonna have a diamond jubilee street party for the 100k 😁🍻🍻

Good job 👍

My favourit....Boxer,Ducati,jumper or whatever citroen....i try to tske crank sensor out now after mashing connector olug on one...😊...the lower ball joints i take the 3 bolts out rather than the joint.....but theres the risking of rajjing a thread if not careful going back together...😂....Top job.....keep at it...youd be bored sensless being service material in a white shirt in a dealers......

Salut, tu es un génial mécanicien .Dommage que tu n'exerces pas chez nous en France , je serai ton premier client, vraiment Bravo à toi ...

Ty for the video bro have a good weekend also bro realistically how long does a transmission job take you to complete on average if I may ask 🤔 and were you able to warranty out your viking jack bro

another great video :D

@WMCS

4 ай бұрын

Thanks mate 🍻🍻🍻🍻

your skills and workmanship just gets better. 👍

@WMCS

4 ай бұрын

Thank you Mike. Always a pleasure to get your feedback 🍻🍻🍻🍻🍻

subbed and liked

halfords jacks are quite good

Ein sehr fleißiger Mann, es ist keine so einfache Arbeit.

@WMCS

2 ай бұрын

Thankyou.

Thanks for the video. How long does a clutch change take on a car on average?

@WMCS

4 ай бұрын

Anything from 3 to 7hrs solid work.

Kevin, what brand of clutch disc, pressure plate and flywheel would you personally recommend? My car is Fiat Panda 169 1.2 2012. I've read on some forums that supposedly Valeo and Sachs are the best ones. Which one do you prefer, out of these two or maybe some other brand? Thank you in case you'll be able to reply, and thank you very much for your videos, they're so helpful for gaining confidence (I'll try to change the clutch on my Panda myself!)

@WMCS

4 ай бұрын

For a Fiat panda. I would personally use an Exedy. They’re more robust for smaller engines. Valeo is very good for the friction plate. Sachs has the best pressure plate for handling higher torque. And LUK is a good all rounder. A bit like a Sunday roast. It does the job.

@MaximC

4 ай бұрын

@@WMCS Thank you so much for the reply, Kevin. I appreciate it and writing/noting it down. By the way (and I hope it's a useful suggestion), it might be useful to you to eventually create a Frequently Asked Questions page and just direct people to that. I'm sure people are usually asking the same few questions under your videos. Wish you best, of luck and health.

Great Work ! You working in France to... ?

Good job, question right angle milwaukee is 3/8 or 1/2 ?

@WMCS

4 ай бұрын

The right angle impact wrench is 1/2 drive. It’s basically an impact gun but right angled.

Hello WMCS, have you done a video of clutch replacement on a Comfort-matic type transmission, as fitted to Fiat Ducato? Your videos are excellent, but look to mostly be manual gearboxes? Cheers.

@WMCS

3 ай бұрын

I personally wouldn’t touch a non manual gearbox even with a barge pole. It’s like poking a hornets nest 🍻🍻😁

@SA-he5ej

3 ай бұрын

@@WMCS 😆😂

Saturday night ist Safe!!!

@WMCS

4 ай бұрын

Glad to know the videos are being appreciated. Thank you 🍻🍻🍻

I am assuming you have not got Audi A6 2.0 Diesel video, cos can't find one, am i right.

@WMCS

4 ай бұрын

That’s correct. But I’ve done one before if you require any pointers.

@carl4699

4 ай бұрын

Hi thanks for getting back to me, just so you know am x Accident repair, but in menny years I've in garages to, and have done a few Clutches in my time, am not in the came anymore, but still working. anyway I'll be doing it on my back, so can everything be done underneath, thanks again, and your videos are something else as in Boss skill and speed. Thanks Carl.

@carl4699

4 ай бұрын

Hi sorry, its a 2008 se tdi.

Cool

hey Kev just wondering how much you charged out for the week...if its not a rude question

@WMCS

3 ай бұрын

Decent

Hey!

Great work as always Kevin, it does make you wonder if this equipment is sealey UK or China these days 😢😢

@WMCS

4 ай бұрын

That’s the 3rd one In less than 12 months I’ve bought …

@maverick4220

4 ай бұрын

@@WMCS maybe get a Daytona jack i've heard they are great Jacks.

👍🥇

❤🎉

YOU GOOD FAM

@WMCS

3 ай бұрын

Thank you.

👌👍

👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

@WMCS

4 ай бұрын

🍻🍻🍻🍻

Hi, I would like to know the price of labor for the austin mini?

@WMCS

4 ай бұрын

Click link in the comment section or video description box.

El mini Cooper es el coche con el que más trabajas 😂

@WMCS

4 ай бұрын

Very true 😁🍻🍻

@user-cx8om2bp9n

4 ай бұрын

Citroen C1, Peugeot 107 and Toyota Aygo

i admire your patience lad why do u need to strip all that off just for a clutch

@WMCS

3 ай бұрын

Otherwise it’ll be similar to having a good scrub down in shower will full gear on including back pack and lunchbox.

@abbott21234

3 ай бұрын

@@WMCS seems a carry on lol

welcome dm , hope sponsor !

@WMCS

4 ай бұрын

Yes. Sponsor is good

Hello, dear Kevin, please replace the Peugeot 206 or 207 clutch plate. Thank you very much ❤❤

@WMCS

3 ай бұрын

Subscribe and access it on channel playlist.

great mini video but half the car gets stripped strange flats to live in everyone on top of each other

@WMCS

4 ай бұрын

.

🙋‍♂️🙋‍♂️

@WMCS

4 ай бұрын

😁🍻🍻

maybe get a Daytona jack i've heard they are great Jacks

100,000 subscribers before this summer Hang the trophy in your van 😂

@WMCS

4 ай бұрын

That’s it. I’m lining up all 100k subscribers for a piss up 🍻🤪 🍸.. you’re definitely on the VIP list.

@maverick507

4 ай бұрын

@@WMCS 🙏🏻

Cheers, mate))

@WMCS

4 ай бұрын

Always great to get a feedback from the original subscribers. Glad you’re still finding the content interesting 🍻🍻

🫡👍🇸🇪 There is something about your preparation for each job that impresses me. Allways nice to se.

@WMCS

4 ай бұрын

Thank you .. like a good chef it’s the prep that makes the difference 🍻🍻🍻

@train4905

4 ай бұрын

I agree tottally😊