Thank you for watching. PLEASE SUBSCRIBE if you want more videos like this one! / gamblerspec
Жүктеу.....
Пікірлер: 29
@r3n5h0r35 ай бұрын
Man, having watched the first 7 or so videos on the tazr, i can say your video skills have imprived sooo much its almost like a different channel. Better story, better editing, better music, better cinematography, fewer unfilmed steps. Really liking where you're at now.
@gamblerspec
5 ай бұрын
Thank you! I am a work in progress, but always trying to improve
@dirk49265 ай бұрын
This is so cool considering what it's made from
@keatonwalker40025 ай бұрын
Should make another dolly kart but a tad longer an more powerful. I actually just bought a dolly today just bc this video thank you.
@DJHeroMasta4 ай бұрын
I wonder of you have a bit too much grip in the front. I feel like high front grip in combo with that short wheel base and ackermann setup/steering angle equals easy spin outs during full steering lock. First, see if you can maintain control of your drifts better without reaching full steering lock then try to decrease or limit the amount steering angle and test it again. You should definitely looking into that ackermann though. That made a significant difference for me on a few simulators. Edit: Damn, editing your comment makes you lose a heart from the uploader 🙃. Makes sense I guess. But at least I know he read it 🙂. Good luck dude!
@johnnyvan49665 ай бұрын
Drill a little divot on the axle for the set screws and they will hold even better . Kool build.
@FenixTX7174 ай бұрын
You should put a "bash bar" up front which will also serve as a foot holder that way you have some extra room.
@Vromo.4 ай бұрын
You should make another one but this time use 2 dollys for more length
@christiannorwik3 ай бұрын
NGL It would be treat if you had 360 cam mounted on the back.
@StrongPayne2 ай бұрын
I think you should call her Dolly Karton
@NyPk924 ай бұрын
Awesome video! What's the engine that you used?
@gamblerspec
4 ай бұрын
Subaru/Robin 7hp off a pressure washer
@MR_IC3 ай бұрын
What length tie rods did you use? if you can, please send the link for them. Thank you!!!
@gamblerspec
3 ай бұрын
PRO BAT 2Pcs 210mm Universal 11"... www.amazon.com/dp/B0BJJL68NC?ref=ppx_pop_mob_ap_share
@qxtankxp3 ай бұрын
Im really bummed i didn't stumble upon you sooner 😔 and looks like you're slowing down content wise.... keep going brother 🙏 you're doing great
@gamblerspec
3 ай бұрын
I've got 3 projects going right now. Unfortunately, just as I got them going, my life added responsibilities every night of the week 😕. I'm hoping to be done with 2 of them within the next 4 weeks 🤞. They are going to be awesome though,so stay tuned!
@qxtankxp
3 ай бұрын
@@gamblerspec I love the crown vic project 😍
@qxtankxp
3 ай бұрын
@@gamblerspec I'm just at the point you're putting the fenders on!
@josephmakea53835 ай бұрын
What happened to the other 2 compressor engines? Are they future projects? Awesome update on the go cart, that thing still looks like alot of fun.
@gamblerspec
5 ай бұрын
I have them set aside and looking for the right fit. Honestly they are better motors than the one I used so I can't wait to bolt them onto something fun
@allenlagman23775 ай бұрын
Sir how to get frame?
@keatonwalker4002
5 ай бұрын
It's a dolly from harbor freight he cut up into a frame an welded back together
@JoshuaQualls3 ай бұрын
I mean, this has got to be named Dolly Kartin’ right?
@gamblerspec
3 ай бұрын
Nailed it
@Lianmotorworld4 ай бұрын
Day two of asking if I can. Have the dolly go kart
@8SecSleeper
3 ай бұрын
Too much liability
@mattthompson92615 ай бұрын
Definitely need to put it on methanol
@Lianmotorworld4 ай бұрын
Pls
@classicjetskis5 ай бұрын
I have only just found your channel and love the videos... the way you make videos is the perfect balance for me... when I make my jetski videos I love to show the process, and to see the outcome at the end... so great work dude! May I also add you seem to have got that drift down by the end. Not sure if you have seen his videos or heard of him, but this side on the pond we have a wicked youtuber called Colin Furze... he makes all sorts of cool stuff and he made a number of awesome drift karts, you may wanna check out Great videos, I've now subbed and want to make a go kart. Keep it up man 🙌🙌🙌🙌 Colins kart video kzread.info/dash/bejne/poGimrCqkqbRdKQ.html&ab_channel=colinfurze
Пікірлер: 29
Man, having watched the first 7 or so videos on the tazr, i can say your video skills have imprived sooo much its almost like a different channel. Better story, better editing, better music, better cinematography, fewer unfilmed steps. Really liking where you're at now.
@gamblerspec
5 ай бұрын
Thank you! I am a work in progress, but always trying to improve
This is so cool considering what it's made from
Should make another dolly kart but a tad longer an more powerful. I actually just bought a dolly today just bc this video thank you.
I wonder of you have a bit too much grip in the front. I feel like high front grip in combo with that short wheel base and ackermann setup/steering angle equals easy spin outs during full steering lock. First, see if you can maintain control of your drifts better without reaching full steering lock then try to decrease or limit the amount steering angle and test it again. You should definitely looking into that ackermann though. That made a significant difference for me on a few simulators. Edit: Damn, editing your comment makes you lose a heart from the uploader 🙃. Makes sense I guess. But at least I know he read it 🙂. Good luck dude!
Drill a little divot on the axle for the set screws and they will hold even better . Kool build.
You should put a "bash bar" up front which will also serve as a foot holder that way you have some extra room.
You should make another one but this time use 2 dollys for more length
NGL It would be treat if you had 360 cam mounted on the back.
I think you should call her Dolly Karton
Awesome video! What's the engine that you used?
@gamblerspec
4 ай бұрын
Subaru/Robin 7hp off a pressure washer
What length tie rods did you use? if you can, please send the link for them. Thank you!!!
@gamblerspec
3 ай бұрын
PRO BAT 2Pcs 210mm Universal 11"... www.amazon.com/dp/B0BJJL68NC?ref=ppx_pop_mob_ap_share
Im really bummed i didn't stumble upon you sooner 😔 and looks like you're slowing down content wise.... keep going brother 🙏 you're doing great
@gamblerspec
3 ай бұрын
I've got 3 projects going right now. Unfortunately, just as I got them going, my life added responsibilities every night of the week 😕. I'm hoping to be done with 2 of them within the next 4 weeks 🤞. They are going to be awesome though,so stay tuned!
@qxtankxp
3 ай бұрын
@@gamblerspec I love the crown vic project 😍
@qxtankxp
3 ай бұрын
@@gamblerspec I'm just at the point you're putting the fenders on!
What happened to the other 2 compressor engines? Are they future projects? Awesome update on the go cart, that thing still looks like alot of fun.
@gamblerspec
5 ай бұрын
I have them set aside and looking for the right fit. Honestly they are better motors than the one I used so I can't wait to bolt them onto something fun
Sir how to get frame?
@keatonwalker4002
5 ай бұрын
It's a dolly from harbor freight he cut up into a frame an welded back together
I mean, this has got to be named Dolly Kartin’ right?
@gamblerspec
3 ай бұрын
Nailed it
Day two of asking if I can. Have the dolly go kart
@8SecSleeper
3 ай бұрын
Too much liability
Definitely need to put it on methanol
Pls
I have only just found your channel and love the videos... the way you make videos is the perfect balance for me... when I make my jetski videos I love to show the process, and to see the outcome at the end... so great work dude! May I also add you seem to have got that drift down by the end. Not sure if you have seen his videos or heard of him, but this side on the pond we have a wicked youtuber called Colin Furze... he makes all sorts of cool stuff and he made a number of awesome drift karts, you may wanna check out Great videos, I've now subbed and want to make a go kart. Keep it up man 🙌🙌🙌🙌 Colins kart video kzread.info/dash/bejne/poGimrCqkqbRdKQ.html&ab_channel=colinfurze