Thanks for watching! At the time the standard frequency in Europe was 35 MHz, This plane flew with a multiple receiver system. Later the receiver system changed to 2,4 GHz. Most large modellers use 2.4 MHz in Europe. Greetings, Fred - see other Airliner models on mu channel: kzread.info

The Etihad flight attendant had her easiest work day ever.

@harpoon_bakery162

4 жыл бұрын

wow, is all i can say about her.

@juicenot2481

4 жыл бұрын

She farted

That's awesome man, great job!

Wow! What a beautifully finished model! Thanks for posting this!

Just Germans. Awesome!

@sidamarali3030

5 жыл бұрын

@Scott Duffy !!!!!!!!!!!!؟؟؟؟؟؟؟

@dwaynecollin4669

3 жыл бұрын

you prolly dont give a shit but if you're bored like me atm you can watch pretty much all of the new series on instaflixxer. I've been watching with my brother for the last couple of weeks =)

@keegankhalid8556

3 жыл бұрын

@Dwayne Collin Yup, I have been watching on InstaFlixxer for since december myself :)

@iracasen5802

3 жыл бұрын

@Dwayne Collin Yea, been watching on instaflixxer for years myself :D

@chrisjaiden1405

3 жыл бұрын

@Dwayne Collin yea, been watching on instaflixxer for months myself =)

I am happy that you liked this posting. When you have time, see part 2 and part 3 of flights of the A 380 at my Fred Harno Channel in KZread! Fred

OMG it looks just like the real King of the Skies. I actually had tears in my eyes when it started flying. And the sound of those turbojets, unbelieveable!

Really nice video Fred, the attention to detail is great! bet the ticker was going on that first take off! might have to cross the pond to come to one of these air shows soon! keep up the good work!

What would it be like to be a passenger on that flight? lol. The takeoff was probably pulling 30 g's

@rusticpineapple787

8 жыл бұрын

Well, you would be unconscious at least.

@scottmoseley5122

6 жыл бұрын

Not bad for the first take off ! Im sure later take offs were performed more realistically after learning how that giant bird flies.

@TopCoding

6 жыл бұрын

Brian E. Scott id say 60 g's

Hi ZYC the cost is more than a small car...

@ItsSpeltChayce

7 жыл бұрын

ScaleJetFred and you can't buy it, you build it

@ScaleJetFred

7 жыл бұрын

It is to much work for me, I prefer flying. There are Airliner Models available second hand from time to time Norbert Rauch knows about it. Norbert Rauch www.rauch-airliner.com/

@randymc61

6 жыл бұрын

Thegoldendoge But the cost still has to be huge. Not that it matters. It's very nice!

@blacksamurai76

6 жыл бұрын

OBVIOUSLY LOL!

@mrdemoncrusher3927

4 жыл бұрын

I'd say more than a small car... a lot more.

I loved watching her fly and hope you decide to fly more and post the videos

Thanks for watching. Peter built this as a "Challenge" after having designed and constructed many Airliner flying models over many years. This also included the twin turbine Concord, it is the basis of Michael Brauer's Fiberglas kit you can see flying on my channel. You are correct: for every day flying we are building smaller planes.

make it a big bigger and put a chair on it

@aadhavan7127

6 жыл бұрын

david vincent it would either break if u sat on it or it would be too heavy to take off so its impossible.

the bags are imitating G-Forces It is a stress test

@deddyputranto8282

7 жыл бұрын

ScaleJetFred Anda menerima undangan untuk menggunakan LINE, aplikasi pesan dan panggilan gratis. line.me/D

@yolo12345lol

7 жыл бұрын

dia nggak bisa bahasa indo mas

@yolo12345lol

7 жыл бұрын

ok then

@mikewelch3903

6 жыл бұрын

It is an excellent idea to find out what stress the airplane can take BEFORE it flies. It would be sad if you found out it couldn’t take it after it went in the air.

@harpoon_bakery162

4 жыл бұрын

it was to see if he could do some aileron rolls or not.

This was a great video and congratulations on your successful flight. Nicely done. Greetings from Arizona.

awesome flight mate, well done

you should repaint it so its in the proper etihad colours

@harpoon_bakery162

4 жыл бұрын

I didn't notice that, wow. spot on dude.

He builds a mind-boggling 65Kg model with their name on it, and in return he gets "Business Class" tickets to Dubai...not good enough for 1st Class i guess

@user-po6hn9id1t

7 жыл бұрын

he could paint the thing in Olympic Airways livery

@ScaleJetFred

7 жыл бұрын

Hi Mike! Yes, he could but hoped he could sell it...

@sparky6200

7 жыл бұрын

I will never again under-estimate how douchey Royals can be.."Buy a RC Jet, no no Daddy I'd much rather go play Polo..."

@ScaleJetFred

7 жыл бұрын

And so say all of us... But to see it fly when you designed and built it - an great achievement Thanks for visiting my channel and the comment

@sparky6200

7 жыл бұрын

I want you to place a HD FPV camera in the fake cockpit, point it out the front window with a OSD HUD, and make a video of a lap around the pattern. That would be even more stunning. Fantastic accomplishment my man.

AWESOME! I've been into R/C for about 30 years, and that is by far the most incredible model I've ever seen. Thanks for posting this video. I really enjoyed it, and I emailed the URL to all of my family and friends. Cheers from Southern California! -- Scott

Wow, what a beautiful build - well done builder. Gorgeous.

why such an unrealistic climb out?

@EleanorPeterson

5 жыл бұрын

Nerves, good sir! Sheer nerves. Maidens can be very scary... And I'm a wench, so I know whereof I speak! ;-)

What is THIS?! A PLANE FOR ANTS!!!

Beautiful....Fine work, guys and gals! That thing is an incredible achievement!

Wonderful video and a beautiful aircraft. Super!

Wow fred idk whats more impressive the plane, skills or the price that must have cost. Very well done!

Well done sir. That is a wonderful piece of kit.

Thank you for watching and sending your comment Joe! You can see two more videos with this beautiful model flying here: A 380 Part Two : kzread.info/dash/bejne/dHh62reRoq_Pmbw.html A 380 Part Three: kzread.info/dash/bejne/poV-psuInprVgqg.html Greetings, Fred ScaleJetFred: kzread.info

Great job! Fabulous!!!

Hi CriticoolHit, Thank you for your comment! Yes, it could have been better. but remember: first flight on an untested design... Have a look at some later flights and I think you will like these T/O's and Landings: A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_PmQ.html and also see the channel: CHANNEL: kzread.info/dron/LLKGiw9zclsM7QMg6F_00g.html Fred

Hallo there! Firstly thank you for watching this video! Well, the weights imitating 3 G placed on the underside of wings and horizontal stabilizer are imitating stress caused by Turbulence where stress is happening on top and underside of the wing. If you like to watch more flights of this fantastic A 380 RC model, look here: A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html Or see other 1:16 scale Airliner models on my KZread channel: kzread.info/dron/LLKGiw9zclsM7QMg6F_00g.html

OMG the dedication to the hobby! I salute Peter! Thank you for sharing.

@ScaleJetFred

Жыл бұрын

Indeed Kittyhawk! Peter, whom I visited a few times after watching him IC powered Airliner models and recorded some of it in Nordhausen and Beckum. Of cause because I am living in Dublin Ireland the Visits ware only few. two are recorded and on my "ScaleJetFred" KZread channel, containing 150 video's, mostly about RC flying. R.O.P. Peter! Thanks for the Visit! Regards Fred

Amazing, its looks great, sounds amazing. Wow, and the size of it, its just mind boggling. Im subscribing!

Very Nice build and flying.

That was one of the most perfect airbus landings I have seen in my RC watching history Ever, Keep it up.

tolles Modell und klasse Video!

Yea! Thank you for watching this video! You like to see more of this RC Model? A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html Or see all my postings: kzread.info/dron/LLKGiw9zclsM7QMg6F_00g.html Regards Fred

Beautiful project! Great flying!

Great you watched my video! See other Airliner models and also two more presentations of this A 380 RC model, enjoy! Have a look at my channel, may be you find something of interest to You? kzread.info/dron/LLKGiw9zclsM7QMg6F_00g.html

Very impressive ! Thank you.

Also, you can see more of this A 380 flying at ScaleJet KZread channel: A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html Fred

Very impressive Sir! Well done

absolutely insane! I adore guys who are able to built and to steer models like this! I am happy when I bring down my TwinStar proberly!! Congratulation!

That is so cool,, great job and great video,,

Thank you very much for watching and the comment!!! You can find two more clips of the same A 380 model flying off tarmac Greetings, Fred ScaleJetFred: kzread.info

fantastic,well done lads.

Very awesome, I love it!

Thank you for watching Adrian! If you like to see more flights of this RC A 380 go to this location: A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html Other Airliner RC models can be fount at my KZread channel: kzread.info/dron/LLKGiw9zclsM7QMg6F_00g.html Regards Fred

Watch these two A 380 videos: A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html Thank you for visiting ScaleJet channnel Fred

It was corrected to get flying on that day. Thanks for watching. You can see more Airliner models on my channel: ScaleJetFred: kzread.info Greetings Fred

Thank you for the comment and visiting my ScaleJetFred KZread channel! I have 2 more postings of this great RC A 380 model: A 380 Part 2: kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 Part 3: kzread.info/dash/bejne/dHh62reRoq_Pmbw.html as well as other Airliner models flying: D 11 video: : kzread.info/dash/bejne/fnyso7Gzidjdl84.html Peter Michel A 340 kzread.info/dash/bejne/pKakpa-mf7qYhMo.html Greetings from Ireland, Fred

Nice work...

Incredible..... Well done!!!!

Nice plane man thats one cool build and that guy is one awesome pilot :D.

Hallo and thank you for watching my video! I have more flights of this A 380 on my ScaleJet KZread channel: A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html May be you like these is well? Fred

Thank You!

Thanks for watching David! You like to see more Airliner models, also this A380 RC model, see other videos on my channel: kzread.info/dron/LLKGiw9zclsM7QMg6F_00g.html Airlinermeeting site: www.airlinertreffen.com A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html Greetings from Ireland Fred

Excellent video. Very accomplished project.

Thanks for your visit to ScaleJet KZread channel! Two more videos can be seen of this A 380 flying, hope you will see these! Fred A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html:

Thank you for watching it! I have 2 more videos on ScaleJet Channel: A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html Regards Fred

I am amazed by the weight on the wings @ 1.33!. Super model and a super film. Thankyou for posting this.

Beautiful plane and a lovely first flight. Hats off to you.

By far the best i have seen.

Hi Peter, Thank you for watching and your comment! This was the first ever flight and the model still needed to be trimmed. If you watch my other 2 postings on my ScaleJetFred KZread channels you see this model taking off and landing from a tarmac runway. Enjoy and Greetings, Fred youtu.be/ BDFxUXrLiiY and kzread.info/dash/bejne/poV-psuInprVgqg.html

Fred you did a fantastic job man! There is NO WAY that I could have handled the stress of the flight alone much less all the prepping that went into the mission. OH, and Congratulations from North Caroline, USA man! You're a freakin Rock-Star to say the least!

thank you for watching and your comment, You can find more videos of this model at: A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html and more Airliner videos on my channel: kzread.info/dron/LLKGiw9zclsM7QMg6F_00g.html Greetings, Fred

Absolutely Fantastic.

Thank You for the comment! and for watching. I have two more recordings of the same plane some month later. I think you will like these is well? Greetings, Fred A 380 Part Two : kzread.info/dash/bejne/dHh62reRoq_Pmbw.html A 380 Part Three: kzread.info/dash/bejne/poV-psuInprVgqg.html

Wow.. you have a real tallent mate.. keep up the good work

Amazing,thks

Hallo C Smith, Thank you for your contact. To answer your question: the plane was not damaged and, to my knolages, is still flying with Lufthansa livery. Some other flights following the test can be found here: A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html and more turbine powered airliner RC models @ my KZread channel CHANNEL: kzread.info/dron/LLKGiw9zclsM7QMg6F_00g.html Greetings, Fred

Thank You for your information! Regards Fred

Beautiful!!!, magnificent work!. As a side note: the flight attendant looks GORGEOUS!! haha

Thank you for watching! I have two more videos of this A 380 RC Model: Have a look at the channel, may be you find something of interest to You? kzread.info/dron/LLKGiw9zclsM7QMg6F_00g.html

Hi Knoxus, It was the first take off with the un - trimmed onw design model. So taking off to clear the ground and trim as soon as one has plenty of hight is a safety measure. See two more SCALE take offs and landings on my channel: kzread.info Happy New Year and thanks for your comment! Fred

Thank You for watching! You can see more oft this A 380 and other Airliner models watch here: A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html kzread.info/dron/LLKGiw9zclsM7QMg6F_00g.html Greetings, Fred

Very nice ! Bravo

What a beautiful A.380, The time and effort to produce this model must have been a passion for the builder/Pilot, well done buddy you did great.

@ScaleJetFred

6 жыл бұрын

Thank you jeepman012, your comment will be passed on to the builder Peter Michel! On my ScaleJet channel in KZread are two more postings about this model: A 380 Part 2: tQJDiOn7oRE A 380 Part 3: BDFxUXrLiiYs Enjoy watching!Greetings from Dublin, Fred

Beautiful - fantastic workmanship too

this is fantastic!

Thank you for watching Luca! See more of this A 380 model here: A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html Or visit ScaleJet on KZread Regards Fred

Thank you for watching my video! Have a look at the channel, may be you find something of interest to You? kzread.info/dron/LLKGiw9zclsM7QMg6F_00g.html YOu find two more videos of this A 380 RC model. Regards Fred

Thank you for visiting: ScaleJetFred - KZread kzread.info You find many more such toys displayed on my Channel! Greetings Fred

That was beautiful! Awesome flight followed by a text book landing! 👍👍👍👍👍👍👍👍👍👍👍👍👍👍Awesome aircraft too...Thumbs up! Greetings from Douglas, Arizona.

Thank You for your comment! You finde two more clips with the same A380 flying of tarmac runway. This makes it more realistic :A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html Fred

Very beautiful aircraft, and a wonderful RC!!!

great job guys !

Beautiful plane. Total work of art!

Fantastic !

Stunning bird. Congratulations!!!! Cheers from Texas USA

Hi, Thank you for watching my video. You are not the first commenting about the flight attendant! Did you find the other two postings about this model (without the flight attendant!)on my KZread ScaleJetFred channel? A 380 Part 2: kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 Part 3: kzread.info/dash/bejne/dHh62reRoq_Pmbw.html Greetings, Fred

Thank you for watching! More RC model A 380 : A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html More Airliner Models hier: kzread.info/dron/LLKGiw9zclsM7QMg6F_00g.html Fred

Hi Ro-Tang Clan, This and most other Airliner models on my Youtubr channel are constructed from Styrofoan and Balsa woohto keep the weight down. see it here: Peter Michelund andere Airliner builder kzread.info/dash/bejne/Ynp-pqtqYLTeeLw.html Carbon made planes may be lighter, but Carbon is much more difficult to use without proper training. Thank you for watching this video! Have a look at my channel, may be you find something of interest to You? kzread.info/dron/LLKGiw9zclsM7QMg6F_00g.html Regards Fred

Incredible model!! Bravo sir!

Hi there! The only molding are the nose part with cockpit, the Tail cone /vertical stabilizer and the Jet turbine cowlings!. All other parts are made with Styrofoam Balsa covered! kzread.infovideos Go to my channel and find: How do builders >>>Peter Michelund andere Airliner builder kzread.info/dash/bejne/Ynp-pqtqYLTeeLw.html there is also a second video about building these large Airliner RC models. Peter Michelund andere Airliner builder: kzread.info/dash/bejne/Ynp-pqtqYLTeeLw.html Enjoy and let me know if you have other questions, Fred

Hi Gary, thank you for visiting this video and comment. If you like to see more of this A 380 model, or other airliner RC models operating visit these channels: A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html kzread.info/dron/LLKGiw9zclsM7QMg6F_00g.html Regards Fred

Now that is what I call a Toy!...great work guys!!

Thank you for watching! You see 2 more clips with the same model here: ScaleJetFred - KZread kzread.info \Enjoy and regards Fred

Thanks for watching! Did you see the other videos I have of this A 380? A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html kzread.info/dron/LLKGiw9zclsM7QMg6F_00g.html Regards Fred

Really incredible that people are capable of building a model like this one. Great respect for their skill and perseverance!

I am sure that tis has been done, but I have had no access to the recordings. Did you watch the other two A 380 RC model videos on my channel? A 380 part 2 kzread.info/dash/bejne/poV-psuInprVgqg.html A 380 part 3 kzread.info/dash/bejne/dHh62reRoq_Pmbw.html Regards Fred