▶️Watch part 1 here: kzread.info/dash/bejne/qZOemNtthsKTg8Y.html

@hellknight2500hd

2 жыл бұрын

Bet all them belts are rust welded to pulleys but she’s turning she’s going to need some work but it will be worth it

@hellknight2500hd

2 жыл бұрын

Also Cummins can be ran without power to fuel solenoid by turning screw in

@manoelgid4283

Жыл бұрын

@@hellknight2500hd é um Cummins?? Quantos hp??

With as much as you guys do this, you should consider a battery caddy. I would build a cart with some wheels and welding cables with eye bolts so you can bolt direct to the starter. Big enough for 4 batteries would let you put two (low amp) into the chasis.

@davidr6585

2 жыл бұрын

Excellent idea but don't stop there, set it up for 6, 12 and 24 volt! With some home made warning stickers... "WATCH YOUR POLARITY" and "IS THIS A NEGATIVE GROUND SYSTEM?"

@chrisnorden8043

2 жыл бұрын

The ambulance service I used to work for had battery caddy on a golf cart with a float charger. The central office had about 30 ambulances that still managed to go dead even when plugged in.

@kenore4003

2 жыл бұрын

The most reliable thing about a battery is that they will go flat at the worst possible time, new or not.

@tristanoliva

2 жыл бұрын

Fantastic idea!

@HINA217

2 жыл бұрын

I like how it bolts in his face and hank starts laughing that had me laughing pretty hard and its funny his when he started and starting mooing 17:29 17:30

What a Machine!! That was a ton of fun!

@HamiltonvilleFarm

2 жыл бұрын

For sure. Thanks for the comment buddy

Just get it started, I pulled a rice cart in the rice fields when I was 15 years old and making 16.00 per day, back in 1978! That Steiger was a badass tractor backyard in the day! 👌🏻🤙🏻🤙🏻

Thanks Hank and Wiley for a great job best entertainment I've seen all day thanks again

@HamiltonvilleFarm

2 жыл бұрын

Thanks buddy

Hank you Guy's are the best, that was great, I smiled when I seen that baby crank. Great video as always!

@HamiltonvilleFarm

2 жыл бұрын

Thanks buddy!

@jeffreyyoung6885

2 жыл бұрын

You are very welcome!

Thats awesome guy's, never thought,after part 1, that the old beast would crank

Well done what a result and no baby birds were harmed in the making of this film 👍👍👍

@HamiltonvilleFarm

2 жыл бұрын

True😁

The old big tractors are great no computers either. I'm enjoying your vids guys.

@HamiltonvilleFarm

2 жыл бұрын

Thanks!

Awesome to see you two give it another shot! These old tractors are sick! Thanks for another awesome video and God bless

@HamiltonvilleFarm

2 жыл бұрын

Thanks for watching!

Sweet music when she finally came back to life great job 👌

I sure enjoy watching and listening to you lads bringing old iron back to life. Would like to see it up and working again when that happens if you can.

@HamiltonvilleFarm

2 жыл бұрын

👍

Good job Hank and Wiley I would say ole sparky but that's the electric chair lol you guys got this running with a bird nest in the disconnected exhaust lol awesome farm find. Shows you never know whatcha gonna find doing these things 👍🤣😂

Hank you and Whilley never give up that was a runner and it ran that was fantastic that was a combat engine more blood coming from you guys then it was running but you beat him and it ran the birds were safe in the making of this video great job guys and made my day.

@HamiltonvilleFarm

2 жыл бұрын

Thanks buddy

I love watching you guys bring back old motors to life. I am an old sailor from the early 70's. Thanks

@HamiltonvilleFarm

2 жыл бұрын

Thanks for your service

You two are closer to being mechanics than singers. 😁 Keep the great videos coming. God bless you!

@HamiltonvilleFarm

2 жыл бұрын

Oh lawd!!!

@carlcarlamos9055

2 жыл бұрын

They aren't singers. They're sangers!

I just watched the Inmate interview with Doug Steiger this morning, it's a really good story. Good vid again guys.

@allensnook7760

2 жыл бұрын

What relationship does that have with this machine just curious.a hamilton farm fanatic?

@mayberickcanfixit7468

2 жыл бұрын

@@allensnook7760 I'm glad you asked because I misspelled "intimate" interview with Doug Steiger, Witch is the founder of Steiger. And Hamilton Farm is mint.

Lol the donkey kick

@HamiltonvilleFarm

2 жыл бұрын

I’m basically a third degree black belt. 😂

Hank, y'all know we all ❤️ you, but put a leash on Willie sos he don't get away. Y'all are perfectly matched and fun teasing between you two cracks me up. It's like working with my buddies, we tease.👍👍👍👍

Well done guys and thank you for trying again to start this tractor and taking us along on this journey, God Bless! 🙂

@HamiltonvilleFarm

2 жыл бұрын

Thanks for watching buddy!

She was being stubborn but in the end she was makin oil and decided to cooperate. Well done fellas

@HamiltonvilleFarm

2 жыл бұрын

That’s right

Man yeah!! Probably the best video yet. You guys are great an God bless you both.

@HamiltonvilleFarm

2 жыл бұрын

Thanks buddy!

Man I love y'all's adventures. I man can tell when two fellas are cut from the same cloth you and Wylie are like two 50 series batteries in a diesel soaked battery box. Hooked up parallel. Love y'all. Thanks for sharing y'all's adventures.

@HamiltonvilleFarm

2 жыл бұрын

Lol. Thanks for watching!

no matter what vehicle or how old it is you still manage to start you guys are awesome keep up the good work👍👍👍👍👍👍👍👍❤

There might be a clod of soil down at the bottom of the flywheel that was holding it solid, after you showed us the flywheel teeth all plugged up with dirt, that gave me that idea. Didn't know you had a mule kick Hank, that was pretty good! Might have to look for another intake boot for the customer now, but I have faith in you 🙂

@HamiltonvilleFarm

2 жыл бұрын

Lol. We took care of him 👍

love your videos out here in california. sounds like you got a good group of guys. god bless you all.

@HamiltonvilleFarm

2 жыл бұрын

Thanks much

This was a other great video I love all you're video and can't wait every week to see one ❤️ and still be amazed how you can get it to run only the singing this time was a extra bonus but you're are great mechanics God bless Thanks for this entertainment

Good stuff. Man do power tools make life so much easier

@HamiltonvilleFarm

2 жыл бұрын

For sure

You two guys (the Dynamic Duo) are simply amazing. I must confess, I really didn't think you were going to get it running. Enjoyed as always.

@HamiltonvilleFarm

2 жыл бұрын

Lol. We just get bigger hammers 😂 always enjoy your comments Terry

Always enjoyable watching you two getting stuck in starting all these equipment. The banter between you guys makes it better to watch lol. Cheers gents from down under

@HamiltonvilleFarm

2 жыл бұрын

Cheers mate

I saw the donkey kick going like that from a mile away and that somehow made it even more funny

Load up that turbo with penetrating oil through the oil line connection and you might be able to save it. It didn't look sloppy in the video, just hard to turn. Anyway great job on it!

i got a tip for you when using ether on a diesel crank the engine over first then spray it in the intake. if you look when you where trying to start it around 19 minuets you can see the fan turning the wrong way against the starter. thats because the ether combusted but it combusted before tdc forcing the engine the wrong way. when you crank the engine over first then spray it the waght of the flywheel helps the starter overcome the pressure of the ether pushing the engine the wrong way.

I came for the tractor repairing and stayed for the singing and good natured banter. Nice job.

@HamiltonvilleFarm

Жыл бұрын

Lol. Thanks!

Wow. Thanks for another super super video. Most interesting and enjoyable. Wow and wow and wow. You two worked really hard getting this one going. It was stubborn but in the end you two got it going. Glad the motor will have a second life. Hats off to Hank and Wiley and your friend that came to help. My compliments to all of you. Good job done. You both take care and be safe. Looking forward to the next video. Thanks for everything. Retired Air Force veteran. Steve.

I giggled for 3 minutes after the “I thought you were crazy…” comment, once it sunk in! 🤣

@HamiltonvilleFarm

2 жыл бұрын

Lol

My goodness, you guys sure manage to get a variety of older machines running. Sometimes with just a little TLC us old folks can do it like in the good ole days.

@HamiltonvilleFarm

2 жыл бұрын

That’s right!

Great job, you got that engine going. This was a pretty tough one. The battery set up was perfect, love it ! That starter solenoid needs some cleaning and bit of lube so it doesn't get stuck.

Looks like an MT40 starter...i have some very painful memories of changing one of those out in single digit temps. My hands hurt just thinking about it

that was one of the best will it starts ive ever seen keep up the great work guys

@HamiltonvilleFarm

2 жыл бұрын

We appreciate that. Thanks

Great job that you could bring that old steiger back to life so it can be saved . It wouldnt take much to make it a working tractor again and its cheap power in this day and age

@HamiltonvilleFarm

2 жыл бұрын

Yeah he’s supposed to load it up soon and work on it

That was one of the more difficult jobs. Good going!

Damn that was cool!! I was sad when you guys found it stuck in the first video. I love those old tractors!!

“Learned this in my jui-jitsu class” best part 🤣

You remind me of my mom from Tennessee.... One day I was listening to House of the rising sun by The animals their version Eric burdon..... When my mom comes in singing it.... And I said I didn't know you liked rock and roll.....she said do you think that is the first time that songs ever been done..... and she starts telling me all the different versions of it all the way back to the 1800s... Hank Williams..

Hank you and Will never stop amazing me, love watching the equipment come to life, or back to life. Keep it going.

Well done chaps I did not think it would run

FORGET alternator belts, the RATS in the bell housing are pushing the flywheel opposite your direction everytime they see the bar slide in where you took a chunk of their roof out.

That was entertaining! I laughed with you guys through the first half of the video. 👍🏼😆🤣

@HamiltonvilleFarm

2 жыл бұрын

Right on

3:59…Hank, good luck at the All Valley Karate Tournament. You are ready to defeat Johnny Lawrence! Another great video. Really appreciate these

@HamiltonvilleFarm

2 жыл бұрын

😂

I love reserecting old dinosaurs

I learned you always bleed the lines cause there’s always air in it after it’s so so long.

Man you guy's are just getting too professional now , great job 👍👍🇺🇸

@HamiltonvilleFarm

2 жыл бұрын

Lol. Thanks for watching!

Glad you got it fired up. Somewhere there is a stuck Farmall that needs pulled out.

Love to see you guys coming back on this piece of fine machinery

@HamiltonvilleFarm

2 жыл бұрын

Right on. Should be able to film loading it here soon

Love watching these videos. a great job yall, thanks for bringing us along this journey again.

@HamiltonvilleFarm

2 жыл бұрын

Thanks buddy !

@user-qn5no1um4s

Жыл бұрын

,,¶¶¶

Hank and Wiley sings. I would buy that album for a buck! 😆 Keep up the fun times, guys!

@HamiltonvilleFarm

2 жыл бұрын

Oh good lawd!!! Your ears would bleed 😂😂

@jasonkuehl639

2 жыл бұрын

@@HamiltonvilleFarm 😆

What is going one there? I don't recall Wylie ever getting musical before! Hank the 'I used to think you was crazy' joke was worth a chuckle!

@HamiltonvilleFarm

2 жыл бұрын

😂

I’m sure you fellers have gotten comments about this but if you get some trans fluid into the cylinders and let it sit for a bit it will break lose easier and do less damage to the cylinder walls when it finally does break lose. But I’m loving these videos none the less.

Wild old rig, all the best to yous and your loved ones

Wow great job guys getting that thing unstuck and running and it runs ok again nice work fellas and God Bless....

@HamiltonvilleFarm

2 жыл бұрын

Thanks 🙏

The most fun a fella can have!! Still the best content, always makes my day! A dedicated follower.

@HamiltonvilleFarm

2 жыл бұрын

Thanks much

Calling someone stupid is one thing but saying you can see their nuts is a worry bro. Hay great video as always guys. Safe travels

Leverage is our friend. one of the first lessons as a mechanic.

9:56 The pulley is a much shorter radius from the rotational center of the pulley's shaft so you won't notice movement as much as you do from the end of the long fan blade. The difference in arc length of 1 degree of movement at 1" from the center of the shaft versus 24" from the center of the shaft is 24x...

@ebutuoyebutouy

2 жыл бұрын

Don't waste your time w these idiots.

Great job getting it broke loose take care and God bless

@HamiltonvilleFarm

2 жыл бұрын

Thanks

Glad to see it up running again must b the most difficult 1 to get going as yet Well done guys keep up the good work

@HamiltonvilleFarm

2 жыл бұрын

Thanks 👍

Great video always excited to see you two working together

@HamiltonvilleFarm

2 жыл бұрын

Thanks 🙏

LMAO, and I thought my mind was twisted. Love the nuts joke. Keep up the great work

That was awesome to see. What a monster!

@HamiltonvilleFarm

2 жыл бұрын

Thanks buddy.

Awesome video, that's awesome it finally cranked up and it sounds good!

Great show good music great people thank you Hank and Wiley have a great weekend

@HamiltonvilleFarm

2 жыл бұрын

Thank you Don

Those green Steigers are some of the best tractors ever built, Imagine the codes a red Steiger would throw if you tried to start one like this :D The Green ones were from a better time, when the engineers were in charge, not the accountants :( Also I don't care what the salesmen say, I reckon a 525 Tiger would pull a 600 QuadTrack backwards, especially with modern Tyres, all without needing 15 software updates and 10 annual subscriptions to login and start it :P

@charlesangell_bulmtl

Жыл бұрын

BS & $$$$ .... perverse minds

Awesome to hear that beast fire up! Keep up the awesome work guys!

@HamiltonvilleFarm

2 жыл бұрын

Thanks much!

Pulling so much current it's flexing the battery cables

Love Wiley's T shirt.Making oil 🛢 😍 👌

I bet those birds were freaking out when it finally started!!! 🤣🤣

@HamiltonvilleFarm

2 жыл бұрын

Yeah for sure. Lol. Bless their hearts. Hopefully momma came back soon after and hooked them up with some worms😊

Good job guys you worked hard on this will it start really enjoyed this video appreciate them a lot 👍

@HamiltonvilleFarm

2 жыл бұрын

Thanks Benjamin

Excellent video Hank :) & Wiley :) and it alive and well to for sure possible but working on farm soon to!

That's a mean lope,badass as always hank my man!!!!

Great video hank and whiley great to see the engine going great fun to watching cheers you guys can't wait to see next adventure what happens

@HamiltonvilleFarm

2 жыл бұрын

Thanks much!

Loving the videos I have been watching all of the will it start videos LOVE them all keep up the amazing KZread videos!

@HamiltonvilleFarm

2 жыл бұрын

Thank you. Would love for you to watch all the ones we put out. We have a lot of fun!

I couldn't contain my laughing when your foot went through that turbo pipe 🤣 thank you sir I needed that today!

@HamiltonvilleFarm

2 жыл бұрын

👍😂

That engine had two beavers and a chipmunk living in It.

Thanks for showing I have done that stuff and it’s a ton of work and trying to get a video angle no thanks good job

That engine, and most other engines spin clockwise when looking at the pulley end of the crankshaft. Some Honda, and several marine specialty engines are the beginning of the exceptions. The flywheel housing of that Cummins will have a covered hole where you can insert an engine turning tool that a person would us a breaker bar or ratchet on. The bell housing full of dirt is a partial indication that the inspection cover at the bottom was left off, which allows the spinning clutch to act like a vacuum cleaner while the engine is running. This leads to not being able to adjust the clutch for wear, and I promise that that one has a bad case of stuckage. I’m not talking about the discs stuck to the pressure plate and flywheel, and there may be a large dose of that too. I remember when tractors like that were common to a few of our neighbor farmers when I was younger, and the few new ones at the dealers. New starter? Delco Remy 8200308 gear reduction and lighter than the steel 42MT that came out.

The air intake is like thatto keep it away from the exaust, that way it dont suck in its own exaust fumes.

I’m dying after that kick!

@HamiltonvilleFarm

2 жыл бұрын

😂

It lives again, well done guys.

Nice work Hank!! 💪🏽

Great video lads ,the beast is alive.!

Nice start for the old beast that is impressive 😄😎

@HamiltonvilleFarm

2 жыл бұрын

Thanks 👍

Opa 😃 não perco nenhum vídeo top muito bom está máquina pelo jeito está muito tempo abandona ainda bem que tem vcs dois para dar vida a está máquina 👍

“We’re gonna make it an electric fuel pump” on an old Cummins with a PT injection pump 🤣

Brilliant job lads got there in the end 👍

Crack the drain plug and check for coolant. ,Turn the engine by the acce as sorry drive...

That thing was WILD!

Excelleny video I enjoyed watching it i need a big tractor like that to push canetrucks in 🇧🇿 Belize

If y’all came to Washington I got some stuff you could tinker with, there’s also a giant excavator that’s been sitting for about 10+ years

Hi from uk guys👋👍 man o man guys this one was the funniest session in a long time 😂😂 but what the hell did I just witness🤔 live wires, shorts, fire, and the birds in the stack😂 I thought was a belt squeal but wen you poked into stack and they looked up as if to so ""do you mind🤔😂"" excellent work and a very impressive effort on this one gents 👌👍 thanks for your time and be safe see you soon guys👍👋

@HamiltonvilleFarm

2 жыл бұрын

Glad you enjoyed it. It was fun to make

@marksaunders2500

2 жыл бұрын

@@HamiltonvilleFarm 👌