Ive been trying to get mine to work for so long. Thank you very much, please keep posting

@ModernBroadcast

Ай бұрын

Did it work?

@gizzer644

Ай бұрын

@@ModernBroadcast yep worked first time. Was easiest way I found so far

@ModernBroadcast

Ай бұрын

@@gizzer644 oh that’s great. A lot of people were experiencing issues following this. Did you notice anything different or run into anything?

@gizzer644

Ай бұрын

@ModernBroadcast no nothing at all, it was far easier then the github way. I could never get that to work, but the website worked first time

How to save ssid name on wifi marauder after created?

Kinda of doesn’t make sense to add the btsniffer or anything Bluetooth related since the esp32 board does not have blue capabilities

@mikecarroll757

5 ай бұрын

The esp32 wroom boards do.

Hello again... The flashing process was very simple as you stated and by all indications on the FZEE FLASHER screen, all went as described, BUT my Flipper Zero GPIO does not show the Marauder firmware listed after disconnecting. I have tried both the FZEE FLASHER and the other method you described to flash the Dev board and both methods indicate a successful flash, but nothing appears on the Flipper Zero device. My Flipper Zero is new... is there more firmware to be loaded on to it before this can be successfully done? Any ideas?

@ModernBroadcast

Ай бұрын

This is really tough to say because it seems that it’s a varied experience from user to user some people follow the video start to finish and it works without a problem others follow the video start to finish and it doesn’t work for them. For me personally I have the unleashed firmware. I just updated it to the newest update and marauder works then when I follow my video that I flashed for evil portal that also works unfortunately I don’t have the key to why it’s not working exactly for you or others. If you happen to stumble across the solution, if you could please share it so I can share with others when they ask me why it’s not working for them and hopefully it’s a simple step or solution Thank you for your time on this matter. Hope you have a great week.

@luist8868

Ай бұрын

Problem solved by switching to the Marauder instead of using the stock Flipper Zero firmware. One more question please... do you know how to open a Flipper Application file (.fap) to be able to look at the Wi-Fi access points on my PC? Thanks!

thanks for the bebop.

Dual boot is the way to go.

@ModernBroadcast

4 ай бұрын

Id be curious to make a video on this AND actually do so, can you share how you got yours up and running?

I have installed the drivers but it still does not recognize my ESP32

@ModernBroadcast

4 ай бұрын

Someone commented that its already out of date so I'll need to look at the video and new method again to see. Sorry.

The Flipper App Store isn't working know anywhere else I could download Marauder?

@ModernBroadcast

Ай бұрын

lab.flipper.net/apps

my flipper looks slighty different, yours says applications but mine says apps, they are the same thing but i still dont see esp32 wifimaruader. all i see is GPIO edit: i think i need the driver but idk which driver to download

@williamspies2739

4 ай бұрын

This is the exact same problem I have

@keithmeyer9450

4 ай бұрын

i downloaded extreme so using the extreme firmware fixed my issue @@williamspies2739

@youdjparents

2 ай бұрын

same

nothing on this works for me ive tried everything is the board i got just broken or do i not have the right files or firmware on the flipper

@ModernBroadcast

3 ай бұрын

Other people have reported this also. My goal is to make another another video on it to showcase it working.

I only get the marauder application with the question mark, it gives me an error saying something about an outdated application.

@wack808

4 ай бұрын

See if you need to update your flipper

@ModernBroadcast

Ай бұрын

Either your fap file is out of date or your flipper needs to be updated to use that version. In most cases anyway

My Flipper Zero froze and will not respond to any commands, including power off. Is there a reset to this device apart from the power button?

@ModernBroadcast

Ай бұрын

Holding left arrow and the back button a few seconds

@luist8868

Ай бұрын

@@ModernBroadcast Thanks that did it. 👍

the website has changed... need an updated video

@ModernBroadcast

Ай бұрын

Which link isn’t working as I clicked on it and it appears to be okay

why does yours say esp32 wifi marauder and mine says Mayhem Marauder?

@ModernBroadcast

27 күн бұрын

Could be an update since I’ve uploaded the video. Where is it saying mayhem marauder?

@S3ARCH_N_D3STROY

27 күн бұрын

@@ModernBroadcast I had xtreme and was just showing it under apps - gpio. I re flashed it with momento and it’s all good now

daf ;] i need how to play arcade games and open garage parking gates or garages thanks alot

@ModernBroadcast

4 ай бұрын

Arcade games not sure how to help you there unless they're utilizing a NFC component. and parking garages you'd need to scour the realm of github and find the playground which might have a code that works. Please be advised most parking garages have cameras and I do not condone any theft or illegal activities so use at your own discretion

ive been researching and still cant get it to work

@ModernBroadcast

5 ай бұрын

What’s inside the apps folder?

@keithmeyer9450

5 ай бұрын

bluetooth, gpio, games, infrared, nfc, rfid, sub-ghz, usb, and ibutton@@ModernBroadcast

@tacoma08

3 ай бұрын

@@ModernBroadcast I click GPIO and it's the items from default. I've watched so many videos and can't figure it out

it doesnt work

@ModernBroadcast

6 ай бұрын

What didn't work? Did you download the drivers?

@MrBrofo1

6 ай бұрын

@@ModernBroadcast should have been more specific, when I plug it in and go to the website it doesn’t load onto my device board. I did hold the boot button and plug it in but I dont think the website works. My dev board is recognized but nothing gets downloaded on it.

We need an updatet Video!!!

@ModernBroadcast

4 ай бұрын

Its already outdated? I'll look at it and add it to the very long list of videos I need to update/create.

how to fix the red light

@ModernBroadcast

4 ай бұрын

Someone had mentioned this is already out of date, so I need to make a new updated updated video sorry.

Do it for Mac please anyone thank you

@ModernBroadcast

3 ай бұрын

I will make a video on Mac here in about two weeks. I’ve started the recording process, but I have other videos slotted to come out before.

A me ogni volta mi dice: torna più tardi amico Sai dirmi perché?

@ModernBroadcast

4 ай бұрын

Non parlo italiano ma posso provare a utilizzare Google Translate per risolvere il tuo problema.

All that happens when I sniff there’s 0 packets on wireshark

@ModernBroadcast

4 ай бұрын

Someone had mentioned this is already out of date, so I need to make a new updated updated video sorry.

@henrym3793

4 ай бұрын

@@ModernBroadcast would be great thank you

Another worthless tutorial. None of the jokers making these videos has a clue. They use a 500 step process that loses everyone. Seriously, count the steps. It’s ridiculous and not helping.

@ModernBroadcast

2 ай бұрын

Noted. Have a good week