Examples of why drying is important and what we use for drying.
Жүктеу.....
Пікірлер: 14
@3Dsjk7 жыл бұрын
I took a tour of the Associated factory in 1992, and they converted an old refrigerator as they Lexan oven. Really cool to see the sheets form so quickly.
@SabulaTech
7 жыл бұрын
That would be fun to see a video of someone pulling sheets out of a hot refrigerator.
@ericmeacham95326 жыл бұрын
I'm not sure what types of molds you pre-heat, but I would suggest you use stone. A thin slab of marble, sandstone, soapstone, etc will heat up and retain the heat, emanating radiant heat into your mold structure. All the best
@bobbyshaftoe Жыл бұрын
Soooooo... what temp do you dry PC and how long do you run at that temp (per thickness)?
@SabulaTech
11 ай бұрын
Hello, sorry missed this one. about 200F or 98c. For all thickness sizes.
@dbbiking55054 жыл бұрын
Hi great vid I keep seeing people doing rc body's on KZread how are they doing it from home without drying there plastic I've tried this and I got uneven droop and bubbles so is it because there using such thin materials under 1mm how are your body's thanks as I'm trying to set up doing my own body's
@JGDeRuvo5 жыл бұрын
What temperature and how long?
@SabulaTech
5 жыл бұрын
We are usually around 104C for 10 - 30 minutes depending on humidity. Sometimes when really hot and humid we go up to 110C but then the masking starts to get really sticky and may stick to the oven or other sheets. So we try not to do that if we can. But for some reason on the hot summer days we sometimes have to go hotter. Not sure why. Of course I should say I am not sure this temp is accurate. We have never checked the calibration in the temp probe. When this oven was in lab I bet they had to check it often.
@aimrchobby3 жыл бұрын
Merhaba kaç derece de kurutmak gerek
@TheSquirrelmaster10f6 жыл бұрын
You have nice hands
@SabulaTech
6 жыл бұрын
Ahh, shucks...
@peterkoopman50704 жыл бұрын
Drying ?????
@alec46725 жыл бұрын
Crazy how every now and then I find a KZread video from a fellow Midwesterner I'm from across the river but I've done all sorts of work all over Minnesota
Пікірлер: 14
I took a tour of the Associated factory in 1992, and they converted an old refrigerator as they Lexan oven. Really cool to see the sheets form so quickly.
@SabulaTech
7 жыл бұрын
That would be fun to see a video of someone pulling sheets out of a hot refrigerator.
I'm not sure what types of molds you pre-heat, but I would suggest you use stone. A thin slab of marble, sandstone, soapstone, etc will heat up and retain the heat, emanating radiant heat into your mold structure. All the best
Soooooo... what temp do you dry PC and how long do you run at that temp (per thickness)?
@SabulaTech
11 ай бұрын
Hello, sorry missed this one. about 200F or 98c. For all thickness sizes.
Hi great vid I keep seeing people doing rc body's on KZread how are they doing it from home without drying there plastic I've tried this and I got uneven droop and bubbles so is it because there using such thin materials under 1mm how are your body's thanks as I'm trying to set up doing my own body's
What temperature and how long?
@SabulaTech
5 жыл бұрын
We are usually around 104C for 10 - 30 minutes depending on humidity. Sometimes when really hot and humid we go up to 110C but then the masking starts to get really sticky and may stick to the oven or other sheets. So we try not to do that if we can. But for some reason on the hot summer days we sometimes have to go hotter. Not sure why. Of course I should say I am not sure this temp is accurate. We have never checked the calibration in the temp probe. When this oven was in lab I bet they had to check it often.
Merhaba kaç derece de kurutmak gerek
You have nice hands
@SabulaTech
6 жыл бұрын
Ahh, shucks...
Drying ?????
Crazy how every now and then I find a KZread video from a fellow Midwesterner I'm from across the river but I've done all sorts of work all over Minnesota
@thomasrobinette3227
4 жыл бұрын
What kinds of work?