Why You Should ALWAYS Grain Fill
In this video I go over how to grain fill, wet sand, and hand rub. This was used on almost all MCM Lane furniture pieces. This is absolutely the best way to refinish to achieve the original factory look. There are no substitutions.
Special products used:
320 grit wet/dry sandpaper
Mohawk Wool-Lube Rubbing Lubricant
Mohawk Pumice Stone
Instagram / madmanrestorations
Пікірлер: 28
The cocktail table looks great. Love the comments at the end about oils and polyurethane!
@MadManRestorations
21 күн бұрын
@@Finish-IT- thanks! 😊
I didn’t know about this, but it looks so amazing
@MadManRestorations
11 ай бұрын
It's a game changer for me. It takes time but is totally worth it.
BEAUTIFUL the finish with the grain filler...defiantly a MUST
@MadManRestorations
Жыл бұрын
I agree. It takes time but makes all the difference for Lane pieces.
Why you should, and why I never will. lol Glad I never mess with Lane Acclaim pieces. Turned out very nice though.
Could this filler be used for example, on oak kitchen cabinets?
@MadManRestorations
5 ай бұрын
It could. But I would try a water based wood filler because this stuff is a pain to use. Amazing results but I can't imagine doing a set of kitchen cabinets with this product.
Nice explanation. Did you use the same process for applying grain filler to the legs? Or, did you skip the step and only apply toner?
@MadManRestorations
2 жыл бұрын
In my Lane restoration I show you those details. But I only grain fill the top and glaze everything else including the legs.
@catsinthecradle8997
2 жыл бұрын
@@MadManRestorations Have you refinished any Lane Rhythm furniture? Is the schedule for refinishing similar?
@MadManRestorations
2 жыл бұрын
@@catsinthecradle8997 same steps for Lane rhythm.
Thanks for the video! What is the equivalent to burlap? Cab I use an old t shirt?
@MadManRestorations
Жыл бұрын
Hmm. I'm not sure. You really just want to take the excess off before using sandpaper.
@Matan2222222
Жыл бұрын
@@MadManRestorations do you recommend cleaning the sanding dust (after sanding the grain filler) with Naphtha? I want to spray a nitrocellulose lacquer over the grain filler but I'm afraid that oil and lacquer doesn't "play" well together.
Did you apply a glaze to this table or did you just use toner and sealer? Thanks!
@MadManRestorations
Жыл бұрын
For this table it was: sealer, grain filler, sealer, toner, lacquer. But I have put glaze over the 2nd coat of sealer before with good results.
Is the sealer before the oil base filler nessesary? I
@MadManRestorations
4 ай бұрын
Yes, because you do not want the filler to come in direct contact with the raw wood.
Beautiful smooth finish but you lost most of the contrast with the two different woods. Wouldn’t be my preference but it still looks good
@MadManRestorations
Жыл бұрын
Acclaim was originally dark with not that much contrast which is what I try to do. Thanks for watching 😊
Why would you sand with the grain, wouldn't that take out the grain filler?
@MadManRestorations
5 ай бұрын
Good question. Using 320 kind of prevents that. The goal is to sand the excess filler that's on the surface not the grain. Let's say I used 150 grit and sanded the whole too like and initial sanding then yes, the filler in the grain would probably be removed. I hope this explanation helps.
@jeffreymiller4984
5 ай бұрын
@@MadManRestorations my boss had me going against the grain using the burlap but everything else you've done in the video is what I do. I work in antiques. I was looking for a better technique than what I was doing but thanks for the reply. I'll subscribe 👍🏾
@MadManRestorations
5 ай бұрын
@@jeffreymiller4984 🤘🤘
I’m confused because your first video was “PROPER LANE ACCLAIM RESTORATION” and now this is “why you should always grain fill” when you didn’t grain fill on the “PROPER LAN ACCLAIM RESTORATION.” I see the obviously smoother finish with filling but the coloring doesn’t look as good. Two different techniques.
@MadManRestorations
Жыл бұрын
Using glaze instead of grain filler is a suitable proper refinish for Acclaim. Grain filling with hand rubbing is the true factory finish.