PRP is like the Aussie/NZ version of Mines. All their products have extensive R&D and have been proven. They'll be legendary in a decades time.

Great video and product!! Can you please do a video on throttle bodies? 6 v's 1 on the Rb. I want to go single fly by wire but i'm worried it will mess up my low end road manners, i know it looks much cleaner but pro's and cons would be great.

@MotiveVideo

Жыл бұрын

Patience my friend. It is coming soon

Awesome product and super well thought out ! Man PRP is absolutely top notch stuff. Funny how people don’t realize how crucial slotted cam gears are and how it is a MUST, when dialling in crank to cam position. With proper belt defection. Your PRP engineering is like the finely made factory Ducati tooling only better ! Thank you for the love you put into your products fit/finish and it’s beautiful quality 🤘🏼👊🏻

Herman flexing the torque bar was a sight to behold!

Awesome ideas & execution going into this product - As always - Well Done 👍🏽

These are so perfect, they address every issue you can have with other brands. Thankyou for the well engineered products you guys make. Now we need a video on how to properly degree cams.

Another incredible product, love the thought process and engineering that goes into it.

Finally someone giving some love to the good CA18! Gonna get a pair for my lil boy from Spain!👌

Very helpful video and your cam gears seem to be a great deal better than other options on the market!!

You know the video’s gonna be great when Herman is in it 🤘

That purple would match very well to the purple exterior and engine accents I’ve been using on my 1J TT SC300 (LHD Soarer Clone). I may need to place an order.

Ok now I want these on all my cars, thanks Herman!

Mint video , keen for the jz series of cam gears to drop

Thanks Herman excellent product, well throughout.

great features! nice work

Are you going to release anything for the Honda enthusiast, I was excited about this segment with this cam gear design myself. Hopefully you do something in the near future, I would love to buy a cam gear trigger setup once I get my skunk2 ultra cams.

Great idea, awesome product!

If you are tuning an old engine without cam phasing, adjustable gears are great! Do remember to properly torque the adjustment bolts and loctite them once adjusted. Also always check fit before running em. I've seen em lopsided and with gear grooves cut too shallow. Also don't trust the timing marks, degree them yourself. I'm just glad you can buy em for most cars now, I used to have to make em myself out of 2 OEM gears.

@Turbo_Tractors

Жыл бұрын

Dont have to Loctite them with PRP, as he displayed you’re little RB isn’t going to spin one of those let alone 5 adjustment bolts with the locking mechanism they designed.

Nice design and engineering. Is it easy indexing the toothed locking washer against the gradations? Looks like it's 3-4 gradations wide.

2JZs are Beautiful!

Great video!

I put my half worn put moon shaft for my cas exhaust cam on to my inlet side and my spare exhaust cam in replacement. I picked up a extra 50hp on my mini RB or the mosted hated engine the CA18DET 100 bucks say what ya want but my 300hp daily 180SX is still rockn hard for the last 22ys.

@Gooie69

Жыл бұрын

Only hated by those Sr tractor engine fans.

While convenient (and I use them on my CA18 and SR20,) there is always a chance they'll slip. Having solid pullies with multiple keyways or the camshaft drilled with multiple dowel pin holes gives the same adjustability, but removes the chance of slippage. Going forward I'll be having my cams drilled with multiple dowels, as I've done for my KA24DE and just use OEM gears. Why not have cam gears exposed: Gravel traps... Gravel traps... (keep the shroud's on ;) )

I am kindly requesting if you could make a bespoke vid on what you do for rb25det. Cheers

Seen that on an evo that wouldn't start, timing was out as it was timed to the vernier mark not timing mark. Lucky it didn't interfere and just reset timing and it was algood.

please make cam gears for VG30 engines. I love my 300zx. I already have adjustable gears, but they are made using existing gears as core. Your engineering work is amazing. PLEASE PLEASE support the VG30. It gets so little love...

Fabulous product.🙏❤️

Beauty products 🤟🏼

Great features

Good demo on the hard coating. Using a belt instead of sandpaper might have been more relevant for the audience. Also more smelly!

Video on actually degreeing an rb? Solid vs hydraulic lifters(rb25)

Gotta love honda vtc

Took me a second to translate "alley gear"...I thought that was a different term for another type of gear. Figured out it's Australian for Aluminum 😅

@notsponsored103

Жыл бұрын

It's Herman for Aluminium. I've never heard it before either and I live there. Most other Aussies just say alloy too.

If you have VVTI intake would you only need exhaust adjustable

what makes these better then AEM Tru-Time which are considered the highest quality cam gears you can get on the market @ only $230 for both gears and are also hard anodized like yours and you want $435 for one gear $755 for two for yours, man good luck with that

Do you have cam gears available for the 2003 Hyundai Tiburon 2.7L v6?

Any plans for a 4age version?

finding it hard to find adjustable sprockets (chain driven) for the B204/B234 Saab engine if anyone has any ideas as where to find some.

Do barras need these?

Anything for SR20's in the pipeline?

Wheres the love for the RB25DET S1

So I should get an R34 with a NEO engine?

Do some for EJ207

I didn't see if it was compatible with there fuel pump gear and trigger cam they just came out with

Nice😉👍👍

*looks at my 1UZ race car with stock cams and cam gears* Well now xD

I'm sure Dustin Williams has already sent this video to Tommy Fyeah?!? ;)

How about an adjustable alluminium outer for the vct cam gear or a completely alluminium vct cam gear

@daneprostamo-brown6552

Жыл бұрын

You can adjust an oem vct cam gear it’s just a huge pain because you have to take the gear off, make a change, reinstall and then do a dyno pull. You can also just degree it to crank 0 as a start point

@samuelmdouglas

Жыл бұрын

@@daneprostamo-brown6552 there's also a kit to make it adjustable from boost doc, but it would likely be beneficial to lighten them up and make them easier to adjust

4age 20v exhaust?

nearly pissed myself when that video of a kid flying came

need a Barra

To me a inline 6 needs puprle cam gears to me always work best on RB's and 2JZ's

@MotiveVideo

Жыл бұрын

Purple works better some how?

@thatsimracer666

Жыл бұрын

@@MotiveVideo I know right it's weird that it just suits a black engine either clear top cover or no cover with purple cam gears just looks to clean

@RedmistAU

Жыл бұрын

@@MotiveVideo much like how red ones go faster.

@RaditzAus

Жыл бұрын

@@thatsimracer666 purple and black is a nice combo for sure

I will finish my top secret 33 before you and i dont have much money flowing in Anyway. Mine even has a genuine top secret bonnet

@MotiveVideo

Жыл бұрын

Cool story bro. We can race when we’re they’re done

I wish I knew how to actually adjust these. That’s what’s keeping me from buying them.

@ZaneForbes

Жыл бұрын

Something your tuner is supposed to set up mate.

@BourneThisWay

Жыл бұрын

@@ZaneForbes I know, but there are no tuner is my area. So I’m left doing everything myself. I’m learning as I go.

👍🤙

Cmon guy's the 2J intergraded main cap girdle, please................

@michaellukies1319

Жыл бұрын

The real question is why would you need one? Billet main caps handle 2500 whp as they are? Std main caps handle well over 1000 whp ... supply and demand

@BUZDRIFT

Жыл бұрын

@@michaellukies1319 There already is a prototype made, why would I go an inferior option if this will be available? You're bracing and combining the main caps with the block and each other! Just like the RB and just like the new Barra version, As soon as it's available, I'm snapping one up Day one! It's the closest thing to a full billet block option!

@radio9730.

Жыл бұрын

Im with Michael on this one... waste of money for 99.99%.

@BUZDRIFT

Жыл бұрын

@@radio9730. Man, I'm running 1300 plus kw to the wheels here, anything that can negate block twist to that level is a great investment! Billet caps don't do shit at those torque and boost levels! Sure it's enough for your common 1000hp weekend streeter! But a Main cap integrated Girdle is as close to a bullet billet block as you're gonna get!

@radio9730.

Жыл бұрын

@@BUZDRIFT Point stands... most of 2Js don't make 1700whp+ and this would only be an additional expense for most.

ealry

I need to sell my car before it gets out of hand

Love PRP, never felt so devoted to a brand like I have PRP.. If its not PRP I dont want it in my car, plain and simple

But an American youtuber who didn’t install these properly said they dont work!!!!!

Yeah na TommyFYeah says adjustable cam gears aren't necessary on an RB and neither are trigger kits.

@MotiveVideo

Жыл бұрын

If he did say that, He’s wrong. Adjustable cam gears have gains even on stock cams.

@VADER_225

Жыл бұрын

How does he fit into a skyline with you attached to his nutsack?.

@Gooie69

Жыл бұрын

@@MotiveVideo He says it at least 4 and a half times a day and that the only turbo's that should ever be on an rb26 are twin t28's.

@festungkurland9804

Жыл бұрын

no one cares

@ZaneForbes

Жыл бұрын

troll lol

Tommyfyeah doesn’t like this lol 😂

@MotiveVideo

Жыл бұрын

Like it or not, facts are facts.

@wd8005

Жыл бұрын

@@MotiveVideo I agree. He prefers OEM or some other brand because 1 car from his shop grenaded an engine due to loose cam gear bolts.

@nobodynoone2500

Жыл бұрын

Nonames are always a gamble, but you gotta loctite the bolts when you're done adjusting them.

Pass on PRP products. Selling other's stuff to then make it and sell it as their own ( spline drive and alternator LS1 (kind of)), many many revision to parts, and crappy anodizing. Their aluminum parts look like they are machined from cheap Chinese Aluminum.. I ain't saying Made in Australia is bad since I've had great RB stuff from other made in Australia companies. I stick to smaller companies specializing in an area of Engine/car and not an assortment of parts. Never been let down. .. Better quality... If you think PRP is the best, you're not looking hard enough.